I just got new Cult OS cranks and no matter how hard I try, I can only get each crank about half way onto the spindle. I was using the biggest ratchet I had and pushing as hard as I could, and there were even metal shavings coming out, but they won't
Added reply in a thread Are cranks not supposed to go on all the way? 7/22/2014 6:38 PM
Bit of extra pushing on it and I got them on. After checking the inside of the crank, I'm pretty sure there was some paint on the inside of them. Turns out the shavings were just from the back side of the spacer that goes around the bolt. Thanks for ... more »
Added reply in a thread Are cranks not supposed to go on all the way? 7/18/2014 5:04 PM
Just like you said, there's about a finger width between the end of the crank arm and the chain stay on each side. However, there is still about 2mm of space showing on the spindle. And it isn't smooth spindle, either. It's splines. So I just don't understand ... more »
Added reply in a thread Are cranks not supposed to go on all the way? 7/18/2014 4:09 PM
I somehow managed to tighten them so that there's about 1-2mm of space left, but I bent the 6mm hex socket I was using. I don't know what else to do, this is just ridiculous.
Started new thread Are cranks not supposed to go on all the way? 7/18/2014 2:59 PM
This forum thread has 18 replies
Added reply in a thread Brandon Begin vs Garrett Reynolds? Who's the better street rider? 6/20/2014 7:02 PM
Do you have a link to this "FIENDING" video?
Added reply in a thread Riding jeans?? 5/28/2014 10:08 PM
Just ride in high tops and tuck your pants in there
Added reply in a thread General Grind Advice Help 5/28/2014 9:44 PM
Umm how are pegs expensive?
Added reply in a thread Keychain How-To Vid 5/28/2014 9:32 PM
Added reply in a thread Washing bike with out getting rust 5/23/2014 11:03 PM
I avoid mud as much as I can so I usually just have dust on my bike. All I do is spray everything with foaming glass cleaner, then wipe it with a rag or shop towels.
Added reply in a thread New Shoes :) 5/20/2014 10:24 PM
Congrats. Personally I can't stand riding in low cut shoes. These are my weapon of choice. Feel like a god damn motocross
Added reply in a thread Mississippi street edit 5/19/2014 6:59 PM
Added reply in a thread TRUE METAL!!! \m/ (no -core or nu) 5/18/2014 10:17 PM
Slayer are the grandfathers of metal? Then what are Black Sabbath and Deep Purple?
Added reply in a thread Frame Size 5/18/2014 12:44 AM
Seriously though, someone please give me a good answer. You wouldn't think 0.15 of an inch would make a difference but... would it?
Added reply in a thread how heavy is the EASTERN JANE?? 5/18/2014 12:31 AM
Don't be posting in threads that are older than you
Added reply in a thread MOTF 5/15/14-5/28/14 Soulrebelrastaman. 5/18/2014 12:27 AM
This might be a silly question since your profile picture is Animal, but what's your favorite company? Opinion on metal music? What's the worst you've ever broke a part? Favorite trick to do on flat ground? Which can you do farther, manual or fakie?
Started new thread Frame Size 5/17/2014 11:15 PM
I just cracked my 21" Colony frame and I want to get a new Kink Solace, but I don't know if I should get it in 20.75" or 21.15" because it doesn't come in just a 21". My Colony felt perfect and I will be putting all the same parts from it on my new frame, ... more »
This forum thread has 6 replies
Added reply in a thread danscomp mobile 5/17/2014 11:06 PM
What the hell is so bad about danscomp?
Added a comment to jimellis14's bike check 5/17/2014 10:53 PM
What size is your frame?
This setup has 2 comments.
Added reply in a thread my box in progress 5/11/2014 9:14 PM
That's sick man
Added reply in a thread New edit: Alaskan BMX trip 5/5/2014 10:38 PM
Pretty sick man