Added reply in a thread I hate people 7/5/2016 5:35 PM

This reminded me of the little kid on Ricky Bobby. Hahaha! "I dunno what that is but i love it!"

Added reply in a thread Nearly 30 getting back on the bmx 7/5/2016 4:50 PM

Same story here bro. I'm 27 and trying to get as good as possible again as fast as possible. Never give up, age is nothing but a state of mind and you can still be professional if you wanted to and dedicate your life to it. That's all i tell myself at ... more »

Added reply in a thread Im thinking of quiting bmx... 7/5/2016 4:24 PM

Lol the first two posts in this thread completely describe my 15 years on a bmx since i stopped skating. My bag of tricks is still very limited, always had to move around, deal with females and parents not supporting it, been off for a couple years at ... more »

Added reply in a thread Hub guards for Hazard V2 front/Mix rear? 7/5/2016 3:50 PM

Oh okay. Well i'll have to look into all of them anyways and see what i can figure out. I actually have a brand new Animal hub guard that somebody gave me, but it doesn't fit on either hub even with the bearing spacer and it really irritates me tbh, ... more »

Started new thread Hub guards for Hazard V2 front/Mix rear? 7/3/2016 3:04 AM

I'm really wanting to start doing handrails, but i noticed a problem and glad i did first before i wrecked myself more than i'm already going to. Lol. When i set my bike up on the rail, i noticed that if my pedal/crank on my grind side was to go down ... more »

This forum thread has 4 replies

Added reply in a thread Fixing Up Old Dirt Jumps 7/3/2016 2:19 AM

Sheep Hills is rebuilt now. Alot has been fixed and made better and alot of the moon dust is swept up daily. I was just there last weekend after the Vans contest. There's a dude that's been living there for like 2 years rebuilding it for the jams and ... more »

Added reply in a thread Primo Mix vs Odyssey V3. Which and why? 1/19/2016 2:02 AM

Some good points in this thread. Well, guess I'll stick with the Mix then. Doesn't look the best, but I trust it more and that's what matters in the end. Saves me from having to de/re-lace 2 wheels and I can just keep the other wheel as a spare, so a ... more »

Updated bike check Fit Mac check 1/19/2016 1:35 AM
C138_0116161437
Updated bike check Fit Mac check 1/19/2016 1:35 AM
C138_0116161437
Added reply in a thread Primo Mix vs Odyssey V3. Which and why? 1/14/2016 4:55 PM

I also thought about this as well, but I'm not completely sold on the female axle trend and don't think I ever will be. I think it's possible to get the conversion kit for both, but I may be wrong about that. And that's exactly what happened with my ... more »

Added reply in a thread S and m or total 1/14/2016 4:30 PM

Agreed. And wouldn't mind having a Standard frame myself as well! That or an FBM Agreed with Skullmunch too about WTP. Tho I'd probably just buy a Sunday if I was trying to get another foreign made frame, but I'm a little Odyssey biased anyways. Which ... more »

Added reply in a thread Warranty 1/14/2016 4:14 PM

I think he's just referring to high quality, high dollar SuperTherm tubing compared to Taiwan factory bulk tubing which probably costs alot less. This is also where I think these assumptions of purity and strength come from. Just because everything in ... more »

Added reply in a thread Primo Mix vs Odyssey V3. Which and why? 1/14/2016 3:53 PM

That was the plan tbh. Lol. I've also been riding alot of dirt lately since this recent "storm" (what you midwest/east coast guys consider light drizzle. Haha), and don't exactly want to take the V3 in the dirt since the driver isn't sealed as well as ... more »

Added reply in a thread Warranty 1/14/2016 3:32 PM

I haven't snapped any frames personally, but I've seen plenty from both sides of the world suffer the same fate. I can say that my '05 Fit frame that was made in Taiwan does feel stiffer than my '13 Fit frame that was made in the USA at S&M out of ... more »

Added reply in a thread Primo Mix vs Odyssey V3. Which and why? 1/14/2016 2:47 PM

This is exactly what I was thinking, but I don't think I ride hard enough to destroy either tbh. Lol. I'm asking more because I would like to keep one wheel and sell the other. The Mix is laced to a Hazard Lite hoop (V3 is to a Quadrant), which I'm keeping ... more »

Started new thread Primo Mix vs Odyssey V3. Which and why? 1/14/2016 1:33 PM

I have both, but can't decide which one I'd rather use. I've been using the V3 for the last month or so, but switched to the Mix after I got it over the weekend just to try it out since I had a Primo hub before the V3 and it was great. I've built my ... more »

This forum thread has 12 replies

Added reply in a thread 7 year anniversary. 1/13/2016 10:06 PM

Pushing 7 years as well, and I too drift in and out for a year or so at a time, especially when I have a job or move or something. Never stop riding tho unless my bike's fucked up and it takes me a while to get parts. Vital's pretty much the same, but ... more »

Added reply in a thread ANY TRAILS IN NORCO RIVERSIDE CORONA AREA 1/13/2016 9:55 PM

Ah nice. Pretty far for me to travel to build. Been helping the homie lately with his trails coming up in the hills in Corona, and have been cleaning up/riding the cemetery jumps in Norco for the last week. On the subject of Norco, has anyone on here ... more »

Added reply in a thread Brake or Brakeless 1/11/2016 3:14 AM

Brakes are a pain in the ass imo, and you don't need them to do fufanus or ride trails, or anything else for that matter(except tracks because they're mandatory. Lol). Like GrumpySteve said, once you've ridden without them long enough, you become alot ... more »

Added reply in a thread Primo Pro/Mix drivers compatible? 1/11/2016 2:49 AM

Got a Primo Mix hub yesterday, and would like to confirm once and for all that they DO NOT interchange! The outer diameter of the Mix driver is smaller, so there's zero chance of the Pro driver fitting inside the Mix hub shell. I would've taken pics ... more »