thanks man. There was just a review of the new wildman expert. SE is drilling what appears to be the same size holes in the same place on the fork dropouts. LOL I really ripped them a new one for all the problems SE bikes gave me since I got this damn thing. LOL Thanks again bro these mods are just temporary until I get a new frame and fork. L8
well, what do you think of the modsifications on my fork dropouts and bracing areas of the top and down tubes. I am working on the back dropouts too, but I wanna do it and basically paint my frame flat black in the same week. It really needs it, but anyways these modifications aren't that bad are they? Up date my comments thanks, L8
ok dude take a good look at my new profile picture (it zooms in). Look at the mods and tell me what you think. Together with the new front wheel and stem, they have made more of a difference than I would have thought. Thanks again for your help, and if you can get a picture of the hardware (knarps) that comes with that fly brake. L8
yo I got a question. I have some fool proof spots that I could drill out on my frame to lighten the front end. I just got a sick ass drill but I don't know what kind of bit goes through Chromoly. I don't trust the guys at the hardware store, so I'm asking around. Have you ever drilled through chromoly? and if so, do you know what kind of drill bits work on steel? L8
looks like my plans to get the black eye team frame have been destroyed. I am broke and my cousin can't hire me cuz his uncle is a hater. Oh well, maybe next summer. L8
you seem pretty knowledgeable on stuff. thanks for keepin' it straight. plus it's good to see not everyone on this board is like "i hate this company, i hate that part, they all suck- blah, blah, blah"
hey thanks for that tip the other day about the demo hub, i found a washer.. idk what to but it was 14mm and about 1mm think .. so i put it in there, put the wheel back on, and shes perfect, thanks alot
hay man i appriciate the info on the whole tube thing you were bout the only one who had somthing to say about my origanly question
just wanted to say thanxs
SteveAM Posted:
about 7 hours ago
thanks for the help and aiding my decision on getting the demo anorexia
iBike Posted:
8/12/2008 6:04 AM
Alright, thanks a lot! My chain thanks you too!
iBike Posted:
8/12/2008 2:01 AM
how do you make spacers to slam your wheel?
04wildman Posted:
8/10/2008 5:19 AM
thanks man. There was just a review of the new wildman expert. SE is drilling what appears to be the same size holes in the same place on the fork dropouts. LOL I really ripped them a new one for all the problems SE bikes gave me since I got this damn thing. LOL Thanks again bro these mods are just temporary until I get a new frame and fork. L8
04wildman Posted:
8/1/2008 11:17 PM
well, what do you think of the modsifications on my fork dropouts and bracing areas of the top and down tubes. I am working on the back dropouts too, but I wanna do it and basically paint my frame flat black in the same week. It really needs it, but anyways these modifications aren't that bad are they? Up date my comments thanks, L8
04wildman Posted:
7/23/2008 11:32 PM
ok dude take a good look at my new profile picture (it zooms in). Look at the mods and tell me what you think. Together with the new front wheel and stem, they have made more of a difference than I would have thought. Thanks again for your help, and if you can get a picture of the hardware (knarps) that comes with that fly brake. L8
bmxandmx Posted:
6/7/2008 4:15 PM
thanks bro been workin on it for a while now..
04wildman Posted:
6/7/2008 3:27 AM
yo I got a question. I have some fool proof spots that I could drill out on my frame to lighten the front end. I just got a sick ass drill but I don't know what kind of bit goes through Chromoly. I don't trust the guys at the hardware store, so I'm asking around. Have you ever drilled through chromoly? and if so, do you know what kind of drill bits work on steel? L8
bmxandmx Posted:
6/6/2008 3:36 AM
check the photos of my new set up...
(.Y.) alfy Posted:
6/5/2008 8:43 AM
dosent sound to shitty i only play a strat
(.Y.) alfy Posted:
6/3/2008 9:59 AM
like your bike what kind of guitar do u play
04wildman Posted:
6/2/2008 8:58 PM
looks like my plans to get the black eye team frame have been destroyed. I am broke and my cousin can't hire me cuz his uncle is a hater. Oh well, maybe next summer. L8
easyAs123 Posted:
6/2/2008 12:15 AM
you seem pretty knowledgeable on stuff. thanks for keepin' it straight. plus it's good to see not everyone on this board is like "i hate this company, i hate that part, they all suck- blah, blah, blah"
sundaybmxRR Posted:
6/1/2008 5:47 AM
hey thanks for that tip the other day about the demo hub, i found a washer.. idk what to but it was 14mm and about 1mm think .. so i put it in there, put the wheel back on, and shes perfect, thanks alot
metal-head Posted:
6/1/2008 5:40 AM
i with i could hold my bike like that.
pennsam Posted:
5/30/2008 4:09 AM
hay man i appriciate the info on the whole tube thing you were bout the only one who had somthing to say about my origanly question
just wanted to say thanxs
bmxandmx Posted:
5/28/2008 4:41 AM
thanks... been working for it forever...
bmxandmx Posted:
5/28/2008 2:21 AM
hey check out the new setup im building in my blog ... i ordered everything last night .. so just tell me what u think...
easternrider21 Posted:
5/27/2008 5:56 PM
ok thanks cuz i might get those or sunday color bars
easternrider21 Posted:
5/27/2008 5:50 PM
well thats good cuz my edwins are 140 mm and i got those tektro brakes too and is the backsweep on them too far towards u or not