About Me

hey, i have just recently realy got into ryding about 10 months ago. i started with a 24" haro, then i had a friend give me his stii pacific. i swaped all the parts i could frm the haro(it wasnt stock btw, ther were pro parts) and any thing lighter too. i got put away in juvie then picked up and started again. i only just got serious about 6 months ago. i ride for the freedom from any problem an being pumped with adrenline, and having that "im a bad ass" feeling when u eat major shit infront of alot of people at HEB then get up and do it again. i now got an all pro bike, its an old 8lb' t1 barcode 21"tt, amarican bb and its blue. its got a demo rear stock rim with 2 KHE tire and primo strand forks. sun ryno lite with a suzie front 3/8 hub laced with dt/swiss spokes 36h laced by Hansson at empire bmx!! odyssey wombolts with a eastern madusa sproket(9t) with a white shadow chain. ecla't comlext pc seat. animal bob 3.0 bars with t1 grips and a pair of kinks lightest bar ends, fly stem w/upgraded hollow bolts. last but not least i have gsport pc pegs and a mutiny hub buddy. i live in austin tx south so hit me up if ur close i allways have parts...mostly pro parts now a'days.

Favorite Companies

Latest Blog Entries

View All Blog Entries
bike improve Ments.
Handle bars:
-cut of unnesary length
put your hands to the closest part of the bars till the bend down to the stem. make shure its cumphy then cut off the remains leave about an inch
-drill holes
depending on if you run brakes. you can drill a hole large enough to run your cable through. on your avrage 2pc bars i drilled two holes in the center peace for no reason but also you can drill holes were your grips sit. like the micneil silencers. run the brake cable down the bottom where the stem holds it. drill a hole on the oposit side of the brake lever(in the stem area or the bars)make the hole face you. so it runs straght to the back. and giv it enough slack to were you can do all the barspins and what ever wiht out tension. sand of the eadges of the entrance and exit points of the cable to avoid any damage.
- run bar endless
- change your grip to the race grip stuff seen on race bikes
-if you want reg. grips cut of the donut at the end of the grip.
BRAKEs
-run a invisable hanging wire insted of standard metal strands. it saves agrivation with frilling. saves aliltle weight, and runs alot smoother just put alitle silicon lube be for you put it in the cable housing.
SEAT
-cut unused piping.
- use rail system or get the eclat complex seat w/ built in seat post at 6.4oz, and the cost of a seat post! alone
-buy hollow stem bolts, use them on your seat clamp! you can also use thoes for other things on your bike too!
-use holow stem bolts to replace crank bolts
TITANIUM
-use it!
Axle
-use shadow nuts not eastern. the easterns strip easer

Photo Albums