isnowyaznV2's Forum Activity

Reply to Did I do this right? 11/28/2015 10:05 PM

Looks great. Just check to make sure there's no crossover at the valve hole. There should be room at the valve hole, known as a "box".

Reply to Full custom $200 11/28/2015 10:02 PM

$220 shipped? Text me at (916)4three0-949six

Reply to Fire deal$ 11/28/2015 9:59 PM

Text me about that Madera sprocket. (9one6)4three0-949six.

Reply to Animal front wheel 11/28/2015 9:56 PM

What's the hub axle size? I wanna know if it can fit my 15mm Daily Grind hub guards.

Reply to Custom Volume Bermuda Fraction of cost 11/28/2015 9:53 PM

It'd be wiser to ship it honestly.

Reply to FS: Sprckets/Seats/Pedals 11/28/2015 9:53 PM

So much for getting back to me on the Mutiny sprocket..

Reply to Fakies 11/28/2015 9:51 PM

Literally practice endo fakies like hell. And then start doing fakies out of nowhere by sitting down on your seat and then pushing backwards with your feet, and then stand up and fakie out. If you're finding it hard to just use pedal pressure, that's ... more »

Reply to sickdude can 3 11/28/2015 9:48 PM

My first day learning switch 3's flat, I actually landed more than a 270 without tapping the rear.

Reply to best pegs for the aviod hardcore street rider 11/28/2015 9:46 PM

I've always stuck to metal pegs and wax. I don't have money to spend all the time to replace sleeves. And if you're a hardcore grinder with barely/no wax and you grind dry obstacles all the time, you're going to broke in no time replacing sleeves. Not ... more »

Reply to Upsweep And Barspins 11/18/2015 11:17 PM

Shortest CS length I ever rode was 13", on a custom S&M BTM frame. This is literally the only difference I could feel, apart from me recently moving to a 21" TT frame, with me being only 5'4" tall. The longer top tube wasn't noticeable because of ... more »

Reply to Hollow Chromoly 11/18/2015 11:13 PM

Yes, it's common sense that solid axles would definitely be stronger than anything hollow, assuming we're comparing the axles of the same material. Shadow Raptor hubs used to have hollow hub axles with 8mm allen key slots, and then more newer hubs starting ... more »

Reply to Progression 11/18/2015 11:06 PM

"Every time...'I feel rusty'" *Goes and pulls back flip out of nowhere. And I'm over here stuck with 360's and complaining of it due to my goofy-footedness.

Reply to Homemade parts & modifications! 11/18/2015 11:03 PM

I've personally never made any mods or homemade parts. I've used makeshift parts, like using some wide spacers from the local hardware store as spindle spacers. One of my front and rear hubs have the hub shell stretched out from hammering out the bearings ... more »

Reply to Upsweep And Barspins 11/18/2015 10:51 PM

It's not really placebo because some people truly feel the difference. I'm one of the people who can't ride everyone's bike on the spot unless I take at least 10+ minutes to get used to someone else's setup. You'll often hear people say, "Why do your ... more »

Reply to Update: Full part out: Fiend, S&M, Odyssey, etc. 11/16/2015 9:23 PM

About the seat? And yeah, those aren't Odyssey R-Race series forks, they're probably some older Odyssey Classic's from the thicker, non-tapered fork blades.

Reply to Frames 11/16/2015 9:20 PM

Text me at (91six)4three0-949six. I'm, interested in that S&M BTM.

Reply to Frames 11/16/2015 9:20 PM

I do have a trans black Solid Cutlass with a 21" TT. You can go check out the specs on their site. I'd give the frame a 7/10 condition rating, and there's two original decals that have been taken off. I'm offering like $130 shipped?

Reply to FS: Sprckets/Seats/Pedals 11/16/2015 9:15 PM

Text me at (9one6)4three0-46four9. I'm interested in the Mutiny Ethreal sprocket for $20. Let me know if you have a 19mm sprocket adapter for it as well.

Reply to Left foot forward and turn left. Big problem 11/16/2015 9:06 PM

I'm goofy-footed/dick-footed, and my God, 360's are the devil for me. I have 180's down quite well now that I think of it. Switch 180's are awkward, but definitely somewhat easier to pull. Switch 360's are okay too, but I need to control my body better ... more »

Reply to Update: Full part out: Fiend, S&M, Odyssey, etc. 11/14/2015 8:42 PM

I'm interested in the seat. Text me. (91six)4three0-4three49