4li2k73z Share your Vital activity on Facebook (More info)

isnowyaznV2's Forum Activity

New thread Headset issues. 3/3/2015 1:07 AM

Ever since about half a year ago, my top bearing race started seizing up. Usually, I'd be able to slip it off and on quite easily. I started having to hammer out my forks and doing that, I feel that the bearing does take some unnecessary force. I actually ... more »

This forum thread has 6 replies.

New thread LF: Tan wall tires, 2.25+, 100+ PSI 2/18/2015 11:04 PM

What the title says, preferably in good condition. I'd like 2.2 or 2.4 Odyssey Chase Hawk's. Anything else works as long as there's no horrifying stretch marks. I would also really prefer a matching set. The size can be mix-matched though.

This forum thread has 4 replies.

New thread Sprocket Alignment Trouble 2/8/2015 12:10 AM

Ever since I went to LHD on my two-piece cranks (majority of two-piece cranks are built fixed on the RHD side), my sprocket can never be installed 100% aligned. My method of installation involved leaving the sprocket bolt partially loose as I tighten ... more »

This forum thread has 4 replies.

New thread Sprocket Alignment Trouble 2/8/2015 12:00 AM

So ever since I started running LHD with my two-piece cranks (fixed on RHD side), my sprocket will never line up 100% no matter what I try. I've tried leaving the sprocket bolt loose, then tightening the crank arm down first, then the sprocket which ... more »

This forum thread has 0 replies.

New thread LF: Drive-side Hub Guard 1/25/2015 9:22 PM

Anything will work, good condition, etc. I would really love the Daily Grind ones if anyone has one for sale.

This forum thread has 4 replies.

New thread Gsport Ratchet hub common problems. 1/14/2015 1:22 AM

I knew it was a matter of time before my hub would be just like the majority of people who have had problems with the hub.. The drive side cone is basically a press-fit aluminum with a rubber seal. For 10t, it looks like the cone rests on top of the ... more »

This forum thread has 14 replies.

New thread Hang Fives! 1/7/2015 5:53 PM

For the love of fckin.... I CAN'T GET THEM NO MATTER WHAT! Like if I try to practice with just the walk in one, or just any way for that particular matter, my seat will NOT reach my ass. I can run a 20", have the seat either slammed or raised and it'll ... more »

This forum thread has 2 replies.

New thread Do bearing shells ever stretch over time? 12/16/2014 1:35 AM

Let's say you hammer out your frame bottom bracket or replace hub bearings literally every single month. I mean, wouldn't that somewhat stretch/wear out the metal material wherever you're constantly forcing contact in/out of it? I assume it'd take the ... more »

This forum thread has 5 replies.

New thread Hilarious local CL ad.. 12/9/2014 7:40 PM

This forum thread has 5 replies.

New thread LF: Aftermarket Frame and possibly a LHD Freecoaster Hub 12/7/2014 9:41 PM

Throw me offers. Prefer factory paint and in black. Mid BB shell, 20.5-20.75" TT, 13.75" CS and under, integrated seatclamp. I want something that's beefy with like top and down tube gussets or something. As for FC hubs, I have no idea how to maintain ... more »

This forum thread has 13 replies.

New thread Problems committing.... 11/29/2014 12:46 AM

If you know me, this is probably like the 6th or 7th topic I've made discussing my habit of not committing while riding. I started riding "kinda seriously" starting like mid 2012, but starting actually getting on a bike mid 2011 and barely riding. I ... more »

This forum thread has 14 replies.

New thread Guitars 11/20/2014 9:47 PM

Anybody wanna discuss anything? I got back into it almost a year ago and I'm catching up just fine.

This forum thread has 32 replies.

New thread Feeling weird on other bikes? 11/12/2014 8:26 PM

Is this normal? I know all of us have certain preferences obviously, so even some a little off like the bar upsweep or backsweep could throw you off. I feel like I should still be able to ride certain things around the same geo, but bar upweep, bar positioning, ... more »

This forum thread has 12 replies.

New thread Gsport Ratchet hub has been loose.. 10/27/2014 9:09 PM

As the title says. I've had it loose since day number one. Everything is properly fitted and tight, brand new, everything is there. But when I go to tighten my wheel, I end up with having the hubguard on and having it barely move, maybe up to half a ... more »

This forum thread has 18 replies.

New thread Anyone ever have this moment? 9/26/2014 1:55 AM

This forum thread has 8 replies.

New thread No part-outs sadness.. 9/22/2014 7:44 PM

When you come across something like this and notice that parting it out would make some sense.. http://sacramento.craigslist.org/bik/4680927010.html I REALLY want those LE Odyssey rims.

This forum thread has 5 replies.

New thread LF: Cheap pegs 9/21/2014 11:24 PM

Preferably traditional metal with anti-roll pins. In decent condition and no dents please. I need something that'll last. My almost 3 year old DK Bundy pegs are not holding up well at all.

This forum thread has 7 replies.

New thread The Ride V7 (pic heavy) 9/14/2014 4:30 PM

It's been so damn long since I've made a bike check. And I've acquired a load of parts in the process which never sold. I then put them together into a spare bike. Yes, things here and there do make my OCD nuts, like my Gsport rims with the rear flipped

... more »

This forum thread has 14 replies.

New thread OCD 9/12/2014 12:03 AM

So yeah.. Just went back to an OCD thread I made a good 2 years ago, and realized that it's even worse than before and I've found out certain things. Apart from having a dialed bike, things outside of that also affect my riding. I mean, I'm still sorta ... more »

This forum thread has 31 replies.

New thread Profile "Z-Coaster" Prototype 9/10/2014 9:04 PM

The new profile "Z coaster", named after the z-shaped internals, switches from a freecoaster to a cassette with one spacer. Wonder how that works? Couldn't really find much on it except for FB, which wasn't really in-depth at all. And knowing Profile's

... more »

This forum thread has 37 replies.