Added reply in a thread can i add more spacers? 3/28/2014 10:41 AM

then i'll just wait till my bars/stem crack...

Added reply in a thread can i add more spacers? 3/28/2014 10:11 AM

would removing the 4mm spacer and adding another 10mm spacer work? (which will make a total of 20mm instead of the previous 14mm) i don't really like how flipped stems look...

Started new thread can i add more spacers? 3/28/2014 9:57 AM

I want my bars to be higher, but I don't know if adding a 10mm spacer will make my headset to get loose easier or something like that, here is a picture that will explain everything (i think).

The red line is where the steerer tube of the fork ... more »

This forum thread has 13 replies

Added a new video Ivan Cuesta chill edit 3/22/2014 3:38 PM

Filmed this little edit in an afternoon at the park, we didn't think about making an edit before we got to the park, and this is what we came up with. Filmed and edited by Carlos Blazquez.

This video has no comments yet

Started new thread New short edit 3/21/2014 8:07 AM

filmed a few clips yesterday, we didn't know that we would make an edit when we got to the park but my friend wanted to film me. here is the result, i'd have liked to repeat some lines because they are not clean enough but the camera was running out ... more »

This forum thread has 4 replies

Added reply in a thread Someone help me with 540s 2/20/2014 7:34 AM

i'm having trouble with 540 but here are some advices, if you wanna try them off a ledge, don't carve too much, or you will completely lose the control of the bike and will make it 100x harder to land it, you have to pull a lot without carving too much, ... more »

Added reply in a thread Has anyone learned hop whips without a fly out? 2/8/2014 5:18 AM

barspins won't be much harder, i don't know about tailwhips, but i think they will be quite harder

Added reply in a thread Ramp/box making.. 2/8/2014 5:17 AM

leave it like that, take off the coping and use it to do some big ass 3 to flat

Added reply in a thread My shitty luck - fly cranks 2/3/2014 6:52 AM

return them and get something better, i've seen many dolmen crack in the pedal boss

Added reply in a thread Fit Marv? The Good And The Bad? 2/3/2014 6:49 AM

yes, go with the marv, i friend of mine bought a forever v2 and it cracked in 6 months in the tt/seat tube junction. He welded it and rode it for another 3-5 months, and he found another crack. he is riding a fit marv now and he likes it.

Added reply in a thread Anyone reviews on eclat tires? 1/29/2014 2:50 PM

i'm thinking on getting the control tire front and back, how do they hold up?

Added reply in a thread Starting with BMX ! 1/29/2014 6:03 AM

you have three options, buy a gyro, take off the brakes or get a longer brake cable

Added reply in a thread MOTF 1/15/14 - 1/28/14 Chad88 1/28/2014 2:30 PM

luego cogeme a mi jajaj

Added reply in a thread Cult Mix 1/27/2014 3:03 PM

yeah i know, i wasn't saying it was the rim's fault, but if you don't run a high pressure, it can happen easily

Added reply in a thread Cult Mix 1/27/2014 2:43 PM

it's not that hard.. a friend of mine has a few dents in his cult match rim too. for example, when you air out and end up doing a kind of a disaster, or when you are hopping wrong up a curb and your rear wheel hits it

Added reply in a thread new bike 1/23/2014 2:37 PM

go for it! stereo makes awesome completes, a friend of mine is riding a stereo complete that costed the same price as that one (around 600 and 700 euros) and he hasn't had to replace any part in a whole year, there aren't any cracks either. he rides ... more »

Added reply in a thread Tasty Beverage 1/22/2014 9:39 AM

then i will just use paint stripper and sandpaper

Added reply in a thread Tasty Beverage 1/22/2014 8:32 AM

ok thanks! i thought that i could raw it using a cutter lol, because the paint chips really easily, and when it gets scratched it seems like i would be able to remove the paint as it is was a sheet.

Added reply in a thread Tasty Beverage 1/22/2014 6:41 AM

looks awesome, i also want to raw my bsd wza when 1 year warranty is over. was the paint of your beverage translucent? if so, how did you raw it and what did you apply to it to cover it against the rust?

Added reply in a thread Good Frame 1/21/2014 11:28 AM

for street, it is better if you like spinning and do manual tricks, for dirt and flowy park, longer chain stays would be more stable but will make spinning harder. also, 20.75tt is just fine for your height, im 5.5-5.7ft and 20.85 is pretty comfortable ... more »

Hello Vital BMX Visitor,

We’re conducting a survey and would appreciate your input. Your answers will help Vital and the BMX industry better understand what riders like you want. Survey results will be used to recognize top brands. Make your voice heard!

Five lucky people will be selected at random to win a Vital BMX t-shirt.

Thanks in advance,

The Vital BMX Crew

Take Survey