lbphillyrider's Forum Activity

Reply to ED Black Frame Paint Finish 6/16/2015 11:14 AM

What you could do if your up to it, you could strip the frame of all its paint( paint stripper and wire brisle brush) finish sand with maybe a 320 sandpaper, etch prime it which is made to go on top of bare metal, then paint whatever color you want then ... more »

Reply to Fédéral v3 female freecoaster 6/12/2015 11:42 AM

I have the female V3 Fed coaster for over a year now and it's still going strong..I'm not too clean on my grinds either and I try to grind shit you probably shouldn't too..its holding up well tho..the only thing is that it does need to be broken down ... more »

Reply to Primo Freemix Slack 6/4/2015 1:20 PM

To say remove the thrust bearing Is to be completely ignorant to the fact that they tell you definitively Not to remove the thrust bearing on the newer KHE coasters that have them

Reply to Painting Issue! 6/4/2015 9:54 AM

That my friend is not orange is what's called's when the solvents in the paints are reacting to each other..NOT GOOD! scratch or chip and it'll start really should strip it now and start all probably ... more »

Reply to Primo Freemix Slack 6/4/2015 9:40 AM slack adjustment and it's about a quarter crank

Reply to Merritt Option Tires (Update) 5/29/2015 9:13 AM

You can't go wrong there..both classics..I like the flangeless Edwin's myself

Reply to Best Freecoaster Hub 5/29/2015 7:18 AM

First off the kid said under $200 rimjob..and anyone that rides a coaster knows that one of the coolest things about them is that they Don't make noise! And anyone that needs a sound that tells them when the hub is engaged shouldn't be riding a coaster ... more »

Reply to Best Freecoaster Hub 5/29/2015 6:02 AM

If you're in the U.S. check cheap goods they had the best price on the freemix pro that comes with both hubguards..I got mine for $165 a few months ago..that was the best deal at the time and he had them in every variation you could want

Reply to Merritt Option Tires (Update) 5/28/2015 10:24 AM

I rode one of them in the back for a long time they're great tires but something's going on over there at Animal and with Scerbo leaving the way he did, it don't look good?? I'd rather spend my $$ somewhere else right now

Reply to Merritt Option Tires (Update) 5/27/2015 11:10 AM

You're right..of course you could grind just fine with any tire but some will handle better than others and if they're making them to hold up a little better that's great.. Really I don't know if it works or not but Mike Brennan didn't have to get involved ... more »

Reply to Merritt Option Tires (Update) 5/27/2015 9:30 AM

So I sent Merritt an email with a pic of the tire this morning and a couple hrs later, Mike Brennan himself emailed me back and offered me another tire at half price since a torn tire really isn't a warranty issue, which I didn't think it was anyway. ... more »

Reply to Merritt Option Tires (Update) 5/27/2015 4:22 AM

Good idea..just sent one with a pic so we'll see what happens..thanks man

Reply to KHE Freecoaster Problem 2/11/2015 3:16 PM

Try flipping the washer around

Reply to 8yo daughter - new bike ideas 2/4/2015 11:03 AM

Check out the cult juvenile. It's a 16" and weighs about 18-19 lbs. I believe it's right there in the $400 range and prob could get 15% off at Danscomp right now. I bought the same one for my daughter. It's just like a real 20 but smaller!

Reply to What Kink bike should i get? 7/31/2014 9:51 AM

I thought all completes came with brakes..isn't it a law..I know it is in PA, but not sure about everywhere else..and besides if you really want a liberty you could just buy a set of brakes and mounts and throw them on if you wanted to

Reply to Tips for beginner at grinding 7/31/2014 9:47 AM

All really good tips here but most important is keeping your weight balanced over whatever it is your grinding on. If your hopping on and falling right off, your leaning away from it..keep your weight centered over it and you'll notice you'll start to ... more »

Reply to Demolition zero or gsport ribcage 7/30/2014 8:54 AM

Gsport no doubt..cross lacing pattern makes it super stiff.. I run the roll cage on the back and it takes a beating but still hanging in there..I don't know the difference between the roll and the rib but can't go wrong with them

Reply to Hard choice 7/30/2014 8:36 AM

I don't think the specs are different just colors and the fc option is on the 15 model

Reply to What is the heat treating process ? 7/30/2014 8:20 AM

That's exactly what I was about to say!! really, that's good shit there man..really on point!

Reply to Mother of fuck... WHY 7/30/2014 8:12 AM

So that's why didn't run big tires back then!! They look way too disproportionate to that frame!! Maybe it's the whole bike though!! Idk?? I'm kinda looks like a flatland bike