sundaybmxRR's Forum Activity

Reply to @sundaybmxrr 11/27/2015 7:42 PM

Yerrrrp that's me haha that day ruled.

Reply to What bike frame is this??? 11/27/2015 4:20 PM

100% not an S&M Hoder, the BTM frame didn't have brake mounts like that (Pretty sure they were removable) and S&M stamps the serial numbers on the dropouts, not the BB shell.

Reply to Spokes? 11/24/2015 6:17 PM

How many times are you going to be building your first wheel up? 6 times in just this past year, 7 including this one,2/Whats-better-for-grinding,1300076,2/Revenge-ohm-20,1299987 ... more »

Reply to Shadow or Cinema Wheels? 11/23/2015 7:22 PM

The only difference is the non-drive side flange is smaller and the shape of the hub is different. Other than that they are exactly the same.

Reply to Shadow or Cinema Wheels? 11/23/2015 6:13 PM

Looking at it it's the v1

Reply to what frame is this 11/23/2015 3:44 PM

Sputnic. I think it's an older Skyline but I can't find a good enough photo of one to confirm.

Reply to Shadow or Cinema Wheels? 11/23/2015 2:01 PM

Jump on this one asap!!! Cult Match complete rear wheel on sale for $150 Out of those two you picked though, as much as I don't like Shadow, I say get the Shadow wheel. Better driver system and the Cinema ... more »

Reply to STICKY: Shit vital members say 11/23/2015 12:59 PM

Lolwut "Rig cranks at my local shop are a fucking huge set of cranks . Massive and seem bombproof. Dennis Probably looked down at his dick and looked down at his bike and an idea formed . He made his cranks after the size of his dick and strength equal ... more »

Reply to DIG BMX: 2015 Washington, D.C. Cranksgiving Street Jam 11/22/2015 10:44 PM

Haha I forgot I posted this here -____- But yeah that was me, I wish they got one of the better ones of those I did cause the pivot on that one was so slow.. Oh well.

Reply to Best cranks to buy? 11/22/2015 5:57 PM

They weren't pieces of shit, they were very stiff & strong. However, the pinch bolts & the pedal insert thing coming loose is exactly why I think they're inferior to Thunderbolts. That and I don't like them being aluminum for some reason, not ... more »

Reply to Need help choosing between 2 completes 11/22/2015 3:06 PM

Don't worry about weight, worry about the quality & parts on the bike instead. That said, get the Fit. More chromoly in the bike (chromoly > hi-tensile steel) and everything's sealed.

Reply to Best cranks to buy? 11/22/2015 3:01 PM

I hate this rebuttal. Why buy an inferior product just because it's North American made?

Reply to Caught in my own act. 11/21/2015 6:49 PM

Definitely either a Morning 2 or 2.1, or Night 2 Can't tell if it has an integrated race or not from the photo but if it does, then it's a Morning 2.1. Either way, they're old and surprise surprise, old parts can & will break. I've broken 2 pairs ... more »

Reply to Need help determining if my crank/hub is lhd compatible 11/20/2015 9:28 PM

Are you sure the specs you read were for the 2010 model? Cause I'm not seeing anything that says the hub is able to be converted. If you could post photos of the driver where the pawls & springs are, and the ratchet ring (the inside of the hub where ... more »

Reply to Fit "super strong " indent 24 bossless cranks ??! 11/20/2015 7:33 PM

Sunday & Odyssey both have rust proof "black magic" coating inside their parts... Not sure how they do that though.

New thread DIG BMX: 2015 Washington, D.C. Cranksgiving Street Jam 11/20/2015 6:41 PM

This was so much fun, thought I'd throw it up here so you guys can see it. Filmed & edited by Rob Dolecki. Everyone threw down some good stuff for this, big thanks to everyone who made it happen!

This forum thread has 2 replies.

Reply to Hoffman or kink? 11/19/2015 7:21 PM

Hoffman hands down. Better parts, more chromoly, all sealed bearings & double wall rims.

Reply to Anyone ride allen bolt hubs? 11/19/2015 5:35 PM

You have to keep in mind that female bolts like that don't need to be tightened as much as you'd tighten a male axle nut because the female axle bolts have more to grab and hold tight.

Reply to Homemade parts & modifications! 11/18/2015 11:01 PM

I think you're preaching to the choir here. At what point did anyone in this thread state that any of it was a good idea? Nowhere. Everyone's just stating their homemade parts & modifications they've done before. Did it work at the time? If so, it ... more »

Reply to ECLAT Maverick cranks good design ? 11/18/2015 10:21 PM

You could listen to Brayden recommend them based on the fact that they haven't been recalled (Like the Eclat Aeon cranks) so obviously that alone should mean they're good (Sarcasm) when he's never ridden them & likely knows no one who has... ORRR, ... more »