Odyssey One Piece Driver

INFO:
The original one piece drivers. Available in 10t, 11t, 12t and 13t in both LHD and RHD.

MSRP: $?
Featured colors: black and gray

Shop Here:

Permalink

32 comments Sort: Newest First
kinkyfit7777
8/19/2009 10:07 PM

does this work with the ody hazard hub the 1st 1?
aznsbmx?
8/17/2009 3:36 AM

dno email gt they shud be able to help
JRM93
8/16/2009 8:04 AM

do you think this would work in a GT cassette hub?
gm premium4ever
6/21/2009 8:44 AM

all they do is skip and break. primos for life
tonecapone74
2/28/2009 11:28 AM

3 prawl isnt really reliable but it u keep this clean and just a little grease on it it will last. 3.5 stars
RideConstantly
1/26/2009 5:25 AM

A must have for any cassette hub that accepts it. Anytime a part is lighter AND stronger AND is more reliable with less maintenance, there is really is no contest. If you take care of it, one of these can last you for two or three years. There is no reason why any bmx bike should have a two piece driver. Like single wall rims and one piece cranks THEY ARE DONE.
pipits2
11/28/2008 7:14 AM
lewlew
11/8/2008 6:52 AM

mine come on my fit flow trail 08 in blue
i broke it in the second week lol
i put my chain to tight
aZnBMX84
9/19/2008 5:24 PM

ran for nearly 2 yrs, park, street, and dirt-- must just be the ppl w/ the flawed ones posting... smooth, little to no ghost peddle. light lube does help and also the O ring ftw.
Dyll_
9/19/2008 2:19 PM

damn the cassette is not made for dirtriders so you've got to accept it
and if you clean you're cassette ones a month it's perfect
+i love the driver if you upgrade the spring a little it's like heaven <3
S&M12
7/17/2008 5:27 PM

I think it is better the the big one on my bike
chubbs
7/4/2008 11:45 AM

I've been running mine for 6months now without a problem.
I removed all the stock grease on it and put it light lube on it, and it clicks louder and is smooth as butta
DK8PACK
6/4/2008 6:12 PM

anyone kno? i jsut got a new dk 8 pack and want a smaller gear ratio
DK8PACK
6/4/2008 6:07 PM

yea can you run this on any cassette hubs?
roby
2/21/2008 10:42 PM

do these fit all cassete hubs?
bob 53
12/26/2007 3:19 PM

why don't we all just have 9th 1 piece drivers, so

we can trade with out getting stuck cause ones a

10th 2piece driver
carson007
12/4/2007 1:00 AM

Great product.

I've had lots of driver problems, but this one solved it.

Wish it came in 9t though.
boomerbmx187
11/18/2007 7:32 AM

its ok but just grt a hub that ant a big turd
weemann_06
10/5/2007 3:03 AM

i just got a 10 tooth and from teh start it ghost pedaled....then i loosened the nut that keeps the driver in and it was fine for a little while and now it ghosts when it wants to....seems like grinding makes it ghost pedal but then doing 3s off stairsets and stuff makes it not anymore....i really dont know what the deal is....
livetoride6
9/13/2007 3:08 AM

They need to make a 9t... i had to buy the ti one from profile to get a good driver...
stlnbkr
9/2/2007 1:48 PM

Got sick and tired of the skipping and snapping so I upgraded to a Blackout 9T driver!
ConspiracyBMX518
7/8/2007 2:27 AM

Works decent, holding up for me I like the easy swap I got rid of that little plastic O ring cause it creates too much resistance and messes with my cranks sometimes and makes them move forward in the air other than that it's decent price could be a little better, for a chromoly driver
bmxbo
7/7/2007 7:28 PM

ya ur hubs are crap so im guessing these drivers are crap too
wildbill990
3/19/2007 5:17 AM

Unlike most of the reviews on this i have to give it a 5/5. I had this 1pc 11t driver for 2years and it held up fine. No skipping, never had any type of engagement problems. I rode alot of trails and street with it. I had the original 3pawl design too..

I didn't have a problem till i landed a feeble awkwardly and bent my axle, it cause the 1pc driver bearings to become bent alil but it wasn't even affected much. I sold the driver to a friend who put new bearings in it and works fine.

I now have a LHD 11t odyssey cassette and has the newer 4 pawl design, i dont think i will run into problems but i'll post on here if i run into any.

P.S. Use the rubber O ring the cassette comes with, it's designed to keep dirt out dirtynorthbmx..
zackt07
3/7/2007 11:09 PM

these divers are good except for one thing, the bearings inside the driver are crap. i was ridin down at metro a few weekends ago, and i was doin a ice pick grind landed it and i couldn't pedal backwards, the bearing just crumbled up. fix it the next day, i just put in 2 new bearings that i had and it worked just find after that.
acerider
3/6/2007 9:01 AM

odyssey dropped the ball on this one, ran alright for like 4 months then the berrings were making grinding noises and like 2 weeks later the actual threading ripped out( it wasnt cross threaded) my buddy joe put a new driver on like 30 min later and thats ones still good....

pretty sure its a ACS fat claws.
GMoney
2/21/2007 2:20 PM

peice of crap!!!!

dont even bother with odsy hubs. . .my gazard lite lasted a year with this before it stripped the hub...been running a demolition nowand its way better!

I love odyssey stuff but not their hubs sorry guys
dustinbmxking
12/19/2006 12:40 PM

i have one in lhd 10t and its held up fine for about 2 years now and finily its getting some ghost pedal so i say its good
Evilbmxer
12/17/2006 1:17 PM

Okay.... For 35 bucks Its not horible... But they could have done a mutch better job...

I run a 10T RHD And after 1 month It skips alot...

Alot of people regrease them... Not a smart move.. That cause's it to skip more if you use real thick grease..

So geep it clean, with LIGHT grease, and you should be set..

Rock On
Rich Red
12/3/2006 6:14 AM

Remove the grease that seems to come stock on these drivers and replace it with some appropriate lube. They are strong but seem to have a bad habit of skipping often enough, although they have a long bearing and contact surface life.