Tech Tips: BMX Pegs - Materials and Installation

BK runs you through everything you need to know about pegs on your BMX bike. Credit: Vital BMX

Rate This

(4.7/5 with 18 votes)

Bookmark and Share
Vital BMX member GlennPPMilligan
GlennPPMilligan

September 9,2009 at 9:56 PM

  • 18 comments Sort: Newest First
  • Vital BMX member ZaCh...P
    ZaCh...P

    about 4 hours ago

    when are you going to make a tech tip on hub guards
  • Vital BMX member mfreestyle_2000
    mfreestyle_2000

    9/11/2009 12:30 AM

    Thanks for the advice nathans#1fan. I think i'll try the g sport hub guards. Look a little expnsive but better than breaking spokes all the time. I have profile mini ss hubs and the spokes are in such bad shape. I think the g sport guard will work.
  • Vital BMX member GorillaTactics
    GorillaTactics

    9/10/2009 9:08 PM

    freecoaster - if I only had one peg I would run it back non-drive side. feebles and luc-e's are my favorite grinds :D
  • Vital BMX member summawhat
    summawhat

    9/10/2009 5:12 PM

    My pegs are on the wrong side. Help BK, HELP!
  • Vital BMX member freecoaster bmx
    freecoaster bmx

    9/10/2009 4:03 PM

    if you had one peg, where would you ride it?
  • Vital BMX member nathans#1fan
    nathans#1fan

    9/10/2009 3:18 PM

    great video. this one is for mfreestyle_2000 i ride the primo binary pegs. these things are great. they are made of 4150 chromoly and weigh 7.6 oz each. as far as hub guards go i would get the g sport pland. the are made of plastic and attaches to the spokes with zip ties. so let me know what u think.
  • Vital BMX member foxrider18
    foxrider18

    9/10/2009 2:38 PM

    I love the tech tips.
  • Vital BMX member mfreestyle_2000
    mfreestyle_2000

    9/10/2009 11:37 AM

    I ride demolition pegs for like six years..
  • Vital BMX member mfreestyle_2000
    mfreestyle_2000

    9/10/2009 11:36 AM

    I was looking foreward to some names of good pegs to buy. Same with hub guards. any suggestions?
  • Vital BMX member just-me
    just-me

    9/10/2009 10:17 AM

    "when ur on the grind"

    LOL
  • Vital BMX member GorillaTactics
    GorillaTactics

    9/10/2009 9:39 AM

    it's funny to me that BK is so intense, almost angry, in his video parts when he's riding, but he seems like such a nice dude when he's just chilling.
  • Vital BMX member agrelon
    agrelon

    9/10/2009 8:05 AM

    sadly you fogot to mention the use of washers!! on smaller dropouts or forks you will deform plastic pegs if you dont put a washer either side of the peg.
  • Vital BMX member kylecarlson
    kylecarlson

    9/9/2009 11:30 PM

    A lot of riders that grind on the right run a left side drive hub so the whole sprocket set up is on the opposite side. You may mess it up how it is right now if you're falling on it a lot, but it should be fine if you manage to keep your pegs on whatever you're grinding!
  • Vital BMX member bmxertingey987
    bmxertingey987

    8/8/2009 1:59 PM

    when i grind i jump to the right side.. thats also where my sproket is.. would i have to move my sproket to the other side so i dont mess it up?? or is it good where it is???
  • Vital BMX member lurch
    lurch

    5/31/2009 5:01 AM

    brain likes his eclat SLOTMACHINE pegs by the looks of it
  • Vital BMX member lurch
    lurch

    5/23/2009 6:39 AM

    this dont play
  • Vital BMX member edded277
    edded277

    5/20/2009 11:38 PM

    does he do the x-games???
  • Vital BMX member jackoff
    jackoff

    5/11/2009 6:29 PM

    brian k is awsome
Please log in in order to comment.