Tech Tips: BMX Pegs - Materials and Installation 22

BK runs you through everything you need to know about pegs on your BMX bike.

Credit: Vital BMX
Create New Tag
  • BigTalkGamers

    1/29/2016 10:22 AM

    poly pegs or classic alluminum?

  • Street/Flatland

    5/5/2011 11:11 PM

    what about cromoly pegs?

  • SJD603

    2/19/2011 9:57 AM

    wow.i almost thught i needed to buy pegs until i saw this.thank vitalbmx,thank you

  • sneekyseven

    1/28/2011 8:19 AM

    more tech tips more tech tips!

  • 4_piece_LEGEND

    4/26/2010 12:01 AM

    ive been using G-sport PLEG's for a year now. I replaced each sleeve once. I love them. Havent needed a block of wax yet! Being able to grind EVERYTHING is well worth needing to replace the sleeves.

  • ZaCh...P

    11/11/2009 5:13 PM

    when are you going to make a tech tip on hub guards

  • mfreestyle_2000

    9/11/2009 12:30 AM

    Thanks for the advice nathans#1fan. I think i'll try the g sport hub guards. Look a little expnsive but better than breaking spokes all the time. I have profile mini ss hubs and the spokes are in such bad shape. I think the g sport guard will work.

  • GorillaTactics

    9/10/2009 9:08 PM

    freecoaster - if I only had one peg I would run it back non-drive side. feebles and luc-e's are my favorite grinds :D

  • summawhat

    9/10/2009 5:12 PM

    My pegs are on the wrong side. Help BK, HELP!

  • freecoaster bmx

    9/10/2009 4:03 PM

    if you had one peg, where would you ride it?

  • nathans#1fan

    9/10/2009 3:18 PM

    great video. this one is for mfreestyle_2000 i ride the primo binary pegs. these things are great. they are made of 4150 chromoly and weigh 7.6 oz each. as far as hub guards go i would get the g sport pland. the are made of plastic and attaches to the spokes with zip ties. so let me know what u think.

  • foxrider18

    9/10/2009 2:38 PM

    I love the tech tips.

  • mfreestyle_2000

    9/10/2009 11:37 AM

    I ride demolition pegs for like six years..

  • mfreestyle_2000

    9/10/2009 11:36 AM

    I was looking foreward to some names of good pegs to buy. Same with hub guards. any suggestions?

  • just-me

    9/10/2009 10:17 AM

    "when ur on the grind"


  • GorillaTactics

    9/10/2009 9:39 AM

    it's funny to me that BK is so intense, almost angry, in his video parts when he's riding, but he seems like such a nice dude when he's just chilling.

  • agrelon

    9/10/2009 8:05 AM

    sadly you fogot to mention the use of washers!! on smaller dropouts or forks you will deform plastic pegs if you dont put a washer either side of the peg.

  • kylecarlson

    9/9/2009 11:30 PM

    A lot of riders that grind on the right run a left side drive hub so the whole sprocket set up is on the opposite side. You may mess it up how it is right now if you're falling on it a lot, but it should be fine if you manage to keep your pegs on whatever you're grinding!

  • bmxertingey987

    8/8/2009 1:59 PM

    when i grind i jump to the right side.. thats also where my sproket is.. would i have to move my sproket to the other side so i dont mess it up?? or is it good where it is???

  • lurch

    5/31/2009 5:01 AM

    brain likes his eclat SLOTMACHINE pegs by the looks of it