Added reply in a thread Flys classic rim 1/17/2019 3:43 PM

Either way check out fly bikes.con they have some killer deals right now

Started new thread Flys classic rim 1/17/2019 3:42 PM

So I have been trying for a good while to get ahold of some fly rims the classic version. They posted on Facebook they were bringing them back for a 20 year anniversary 48 bucks!!! Also they are carrying the lunar rims which I didn’t know they still ... more »

This forum thread has 5 replies

Started new thread Rubber pedals (YouTube video) 12/29/2018 11:01 PM

https://youtu.be/0Lb6ktSRkuc Anyone think this is practical for bmx? I wouldn’t use car tires, maybe some old bike tires but seems like it would work pretty well if you don’t ride brakeless

This forum thread has 9 replies

Added reply in a thread anyone think this is a good idea ? 12/26/2018 1:19 AM

Idk if I would personally say I like it but i haven’t seen a bike that was intentionally rusty so if you are into it roll with it. Side note I don’t really like the way raw frames look unless it’s straight from the manufacturer.

Added reply in a thread Eastern ti grim reaper 12/19/2018 8:51 PM

I’ve done some looking around in ti tubing, it would cost the builder nearly half the sale cost in material alone ( ti tubing, dropouts headtube, bb)to build the frame so the price is fair if you compare it to chromoly most frames range from 300-400 ... more »

Added reply in a thread Any of you guys near louisville, kentucky? 12/12/2018 12:58 AM

I’m about 2-230 away im pretty excited. Louisville has a really nice outdoor park and the mega caverns so it gonna be a prime spot for comps and getting to meet a lot of pros that ride for source. Hope they let people but parts direct from the shop that ... more »

Added reply in a thread Five ten mtb shoes 8/20/2018 5:25 PM

I got them for $80 I've been looking for some better gripping shoes. I know most people are riding vans right now but everyone I see they are torn up and for 60-70 bucks I'll try something else. Either way one one way to find out if they work for me. ... more »

Added reply in a thread Five ten mtb shoes 8/19/2018 6:53 AM

I really like the feeling of being stuck to my pedals, it make me a little more confident but either way only one way to find out if I'll like em

Added reply in a thread Broke my chain and almost my knee 8/19/2018 6:50 AM

I stuck with the interlock I've never had any problems with them only had them brake a few times

Started new thread Broke my chain and almost my knee 8/18/2018 2:27 PM

This is a week later was out riding sat morning feeling good then my chain snaps smacked my leg pretty well. My shadow chain was min 5 years old so I ordered a new one haha

This forum thread has 5 replies

Added reply in a thread Five ten mtb shoes 8/18/2018 2:20 PM

http://www.chainreactioncycles.com/mobile/us/en

Started new thread Five ten mtb shoes 8/18/2018 2:20 PM

Anyone ever use five tens mtb shoes? Got into mtb recently and they seem really popular, supposed to be super sturdy and have a lot of grip. I have worn Osiris for a long time but it seems they are getting cheaper and the soles don't grip very well figured ... more »

This forum thread has 17 replies

Added reply in a thread 2 foot kicker 8/7/2018 5:41 AM

That's what I'm thinking also I want it to be pretty portable and easier to jump (hard to go fast in the grass) may just make another just smaller with the extra wood

Added reply in a thread 2 foot kicker 8/5/2018 3:29 PM

... more »
Started new thread 2 foot kicker 8/5/2018 3:28 PM

I built a little kicker for the back yard to mess with when I can't get out to ride, might cut it down to a foot or build a smaller one kinda hard to get enough speed in the grass. Only cost maybe $30 bucks for a sheet of plywood and 2 2x4s plus I still ... more »

This forum thread has 16 replies

Added reply in a thread Welded my pedal 5/30/2018 4:54 AM

3/32 was a little much ( it was all I had on hand) I tig welded it with 4043 Tig wire so no splatter to worry about. I did get some .035 wire ( little less than 1/32 ) but since I bought the wrong size pins so I just tapped them up a size and I didn't ... more »

Started new thread Welded my pedal 5/29/2018 5:11 AM

The pins on my pedal keep falling out because the threads were stripped so I decided to try and weld them and tap them. It worked pretty well welded up to holes(all I had was 3/32 filler which was to big, so I wasn't pretty which is why I didn't take

... more »

This forum thread has 7 replies

Added reply in a thread Creating a youtube channel "Francky BMX filmz" 2/1/2018 11:19 PM

I'd add some music always loved the small bands songs that props would put in their videos

Added reply in a thread Affordable Stem 2/1/2018 11:09 PM

To me if I wasn't looking for a particular brand I wouldn't pay an extra 50$ to have bsd machines into my stem

Added reply in a thread We went to Taiwan and started a bike company ( YouTube video by pink bike) 1/29/2018 11:18 PM

Ya I wish more bmx company's would share more things, bmx bikes can be pretty simple and without a lot of differences from one brand to the next besides some minor details, I think it would make company's stand out more from the crowd of bikes. Like ... more »