Bob_B's Forum Activity

Reply to Bent Stock Rim - Fix or Replace? 7/9/2019 12:43 PM

Thanks, I will give the shop a call where I bought, they looked it over before I walked out the store. Hopefully they can straighten things up.

New thread Bent Stock Rim - Fix or Replace? 7/8/2019 8:58 AM

So I bought a 2020 Kink BMX Gap XL and after about 2-3 rides I noticed the rear rim is slightly bent. Its a mission X7 rim and all I have been doing is bunny hops and learning to manual. Is it possible to bend back or ignore for a while? If I ignore ... more »

This forum thread has 3 replies.

Reply to Pads 7/6/2019 7:11 PM

So I have smashed my shin with my peddles a few time but have yet to bang up my ankles. Do ankles usually get caught when trying to grind?

Reply to Pads 7/3/2019 5:49 AM

Thanks for all the input. What about sizing are Fuse pads true to the size the recommend on their sizing chart? I am 6'1" 195lbs and would assume i would need L or XL pads?

Reply to Pads 7/2/2019 3:55 PM

Let me know how they go, I am in no rush.

Reply to Pads 7/2/2019 1:21 PM

Anyone know anything on the Fuse Omega Knee Pads or Fuse Echo 75 Knee/Shin Pads?

New thread Pads 7/2/2019 12:52 PM

I am looking at getting knee, elbow and maybe shin pads. What specific brand and models are good and not too pricey? Besides a skate park requiring them, which of the three are most critical for BMX (elbow/knee/shin)? Thanks

This forum thread has 15 replies.

New thread Kink Gap XL 6/30/2019 7:05 PM

Anyone own this bike or have experience with it? I am 6’1” beginner looking to upgrade to the 2020 version but would like some feedback first. Thank you.

This forum thread has 4 replies.

Reply to Triple Eight Helmets 6/30/2019 7:03 PM

I just bought the triple eight Gotham off amazon. Very comfortable, fits very well. I have a big head and got the L/XL. Hope that helps.

Reply to Rear Bearings Replacement 6/29/2019 3:55 PM

Thanks for the help. So I replaced the ball bearings and everything is back together. However I still have some play/rattle in the wheel. Assuming this means the hub is worn out? If so, doesn’t seem worth spending the $100 for a new wheel when I bought ... more »

Reply to Rear Bearings Replacement 6/28/2019 1:06 PM

With trying to fix these ball bearings I have heard that I will most likely have the same issue again. Is it because or dirt and moisture? Or is it because of the pounding from jumps, bunny hops etc? Ultimately I just need this bike to survive until ... more »

Reply to Central Jersey riders 6/27/2019 6:44 AM

I am occasionally around the McGuire AFB area so that’s not too far off. I will let you know next time I might be able head up your way. Thanks for the reply.

New thread Rear Bearings Replacement 6/26/2019 6:41 PM

So I bought a used Haro 100.1 to get started in BMX and after day two I blew out the rear ball bearings. They all pretty much fell out so I have no idea what size(s) they were. Can anyone tell me how to determine the size(s) for replacing them? Would

... more »

This forum thread has 4 replies.

Reply to Introduce Yourself 6/26/2019 10:02 AM

Hey All, my name is Bob and I am just getting into BMX at 30. Live in Southern Jersey along the Shore and looking to find some people local to ride and learn from. Bought a used (like new) 2011 Haro 100.1 to start out on looking to upgrade in the fall ... more »

New thread Ocean City/Somers Point, NJ Area 6/26/2019 9:54 AM

Anyone in the Ocean City/Somers Point Area looking for someone to ride with? I am 30 and just getting into BMX and looking for anyone in the area. We have a few local skateparks Brigantine and AC just opened back up. Thanks Bob

This forum thread has 0 replies.

Reply to Central Jersey riders 6/26/2019 9:52 AM

Hey man, I am just really starting to get into BMX at 30, was kind of into it when I was a kid. Anyhow I am down in the Ocean City/Somers Point, NJ area, and looking for someone to ride with. I know it's a ways off but if you ever are down that way.

Bob_B

Member Summary