COLORADO SPRINGS's Forum Activity

Reply to bottum bracket help !! 10/2/2011 10:58 PM

Yeah buddy!

Reply to bottum bracket help !! 10/2/2011 10:52 PM

Yeah, or till your cranks spin as much as you want them to. I have mine so that it spins no more than 180*. So half a crank-flip. Just to give you an idea how tight mine are and I never have any problems.

Reply to Please Help 10/2/2011 10:48 PM

Sealed Bearings...

Ball Bearings in races... Loose ball bearing DO NOT have the races and just the bearings. ... more »
Reply to Please Help 10/2/2011 10:43 PM

So it had little ball bearings in it? Look at the bearings and see if any are chipped or have flat spots in them. Check the inside of the hub where the bearings go for pits. Like Spenlard said, you should get a new wheel. Loose ball or "semi-sealed" ... more »

Reply to bottum bracket help !! 10/2/2011 10:39 PM

It's supposed to keep the inner ring of the bearings from getting pushed in and wearing out the bearing sooner or destroying the bearing all together. I don't run one cause I can get my cranks to tighten up enough so that they don't spin. So you can, ... more »

Reply to Please Help 10/2/2011 10:35 PM

THIS! did that thing have ball bearings in it or sealed? Do you know the difference?

Reply to Please Help 10/2/2011 10:33 PM

What bike is it off of?

Reply to Please Help 10/2/2011 10:30 PM

What hub is that?

Reply to Please Help 10/2/2011 10:22 PM

Post it. What's the freeride?

Reply to Please Help 10/2/2011 10:18 PM

You can't get what out of the "hub"?

Reply to vital community 180 edit 10/2/2011 10:16 PM

Can I use a Go Pro so it looks like it?

Reply to Please Help 10/2/2011 10:14 PM

Loose ball?

Reply to Goals 10/2/2011 9:53 PM

Hey, which edit?

Reply to Goals 10/2/2011 9:45 PM

I think I've done these before.

Reply to Forks 10/2/2011 8:32 PM

DECO!!! 28MM Offset with removable mounts. These things are bomb proof!

Reply to MOTF Oct 1-14 abreezy111 10/2/2011 9:00 AM

Yellowdose or yellow-jackets? Rick Scott or Rick Ross? Darren Bouldin or Micheal Bolton? Billy Dexter or Dexter from Dexter's Laboratory? Carrie Fisher or Skate Cary NEGSRC or NEGSRC? N.C. State or U.N.C. ? North Carolina or South Carolina?

smile
... more »
Reply to DK Bikes at Walmart 10/2/2011 8:23 AM

Thought they knew! Don't tell them what companies use the same vendors, manufacturers, or factories cause you might just break their hearts.

Reply to is 28 to old to start riding again 10/2/2011 8:07 AM

Only if you're not having any fun! I can't tell you how many people ride out here OVER 35. 40 is the new 30!

Reply to You opinion on Indian Givers. 10/1/2011 3:46 PM

Oh, I see. I thought you meant that Indian givers were only aloud on opposite spins. I was thinking, "Who's the dipstick that started making up rules on how to pull tricks?". Is there a book with rules that dudes are reading that tell you how to pull ... more »

Reply to You opinion on Indian Givers. 10/1/2011 3:42 PM

Nah, I was askin' keironw74. He said... "keironw74 wrote: only aloud on opposite spins". I was wondering if keiron74 steps out of fakes that carve Indian side instead of pulling the trick. That would be funny if he does.