Coopers25's Forum Activity

New thread Profile racing stem bolts 2/1/2020 1:10 PM

Hey all I got a profile push tl stem and I want to replace the current bolts on it with 6mm head bolts as the ones that come stock are 1/4” head bolts. I’ve found ti bolts but really want chromoly ones. Anyone know where to look?

This forum thread has 5 replies.

New thread Raw Shorty 1/29/2018 11:20 PM

Bike got a total remake so most of the pieces are different from my last bike check. Frame is new and wheels are new too. I even laced and trued them. Bike is dialed and it's a tank at 28.5 lbs but I make it work. Frame : Cult SOS Ricany Raw Forks: Odyssey

... more »

This forum thread has 13 replies.

New thread Knee and Shin pads? 2/19/2017 11:11 PM

I recently took a spill and injured my knee and shin pretty bad so I want to buy knee pads and shin pads. Anyone know a good knee/shin pad combo that fit under pants really well?

This forum thread has 13 replies.

New thread Fiending for more 9/19/2016 6:10 PM

Got an awesome new frame and I could not be more stoked. Got some plastic pegs too which are pretty cool also. Here she is Frame : Fiend Reynolds v1 Forks: Animal street fork Bars : Fiend Reynolds Stem : Fit High Top Headset : Cult Grips: Fiend Barends

... more »

This forum thread has 21 replies.

New thread Redbull joyride 8/22/2016 9:07 PM

I don't know how many of yall watch slopestlye mtb but its pretty sick. Didn't watch the whole thing but was stoked to see that brett rheeder won. Even more stoked that one of the other riders (brandon semenuk) rode a coaster and did a massive half cab ... more »

This forum thread has 3 replies.

New thread @sundaybmxrr 11/27/2015 7:18 PM

is the first clip you? that bike looks like yours https://www.youtube.com/watch?v=0znb8goe24E

This forum thread has 1 replies.

New thread Handlebar geometry 6/23/2015 11:24 PM

can someone really explain what backsweep and upsweep are and what they do? I've looked a lot online and haven't really found any good info on it.

This forum thread has 7 replies.

New thread painting 3/11/2015 8:40 PM

Will aircraft striiper/regular paint stripper remove weld marks on frames with a trans paint job?

This forum thread has 7 replies.

New thread Shipping a wheel? 3/2/2015 8:40 PM

Does anyone know what the cost of shipping a wheel would be? Does anyone know what size box I would need(like the dimensions and stuffs)? I'm trying to sell an old one I have and i need to put it out there!

This forum thread has 0 replies.

New thread Rails? 1/29/2015 8:33 PM

I'm scared shitless and they feel super awk to grind on. Any advice to help cope with this because I really would like to start doing stuff on them

This forum thread has 10 replies.

New thread odyssey stampy v2 12/26/2014 2:51 PM

does anyone know the forks in the video? i think the blue ones are the mutiny forks but im not sure. I have a pretty good idea of what the rest may be i cant be sure though

This forum thread has 4 replies.

New thread Benny Hill (update 3/21/16) 9/23/2014 6:49 PM

Will update with new pics asap Frame : Fit Benny L. XL size Forks: Odyssey R25 Bars : Fit Benny L Stem : Fit High Top Headset : Cult Grips: Eclat Filter Barends : Par ends Cranks : Odyssey Thunderbolts Pedals: Odyssey twisted pc Sprocket : Fit Key 27t

... more »

This forum thread has 33 replies.

New thread shadow disaster sprocket guard 9/13/2014 5:45 PM

do you guys think it would work with odyssey thunderbolt cranks?

This forum thread has 3 replies.

New thread Headtube angles 8/27/2014 2:22 PM

Will i really notice any difference on a with a 75.25 and a 75 headtube angle? This is assuming that both frames have same specs and all any input is appreciated

This forum thread has 4 replies.

New thread Footjam fakie 8/16/2014 11:54 PM

I'm going to start this off by saying that I already know how to footman fakie I just want to know what is the "proper" foot you use to footjam with. I ride right foot forward and I use my left foot to footjam. Is that correct because a friend was practicing ... more »

This forum thread has 8 replies.

New thread My shred sled 7/14/2014 7:13 PM

Hello vital! This is my bike check. It's basically done with a couple of things here and there I need to upgrade but it's basically all done! Frame: Cult cc01 2013 (this black frame is a warranty replacement) Fork: Volume Hatchet Bars: Volume bourbon

... more »

This forum thread has 5 replies.

New thread Spokes 6/16/2014 6:38 PM

So I want to lace a wheel and im stuck on deciding which size spoke to use. My drive side is 184.4 and my non-drive side is 183.7. Should I be fine with rounding down both spoke sizes to 184mm? I used the pijin spoke calculator and I don't want to buy ... more »

This forum thread has 7 replies.

New thread handlebars 4/21/2014 10:07 PM

I used to ride 8.5 rise bars with a 36 mm stem and that felt absolutely perfect then i made a transition to 8.75 with a 31mm stem and that feels too big for me (awkwardly wide too they're 30" long when i used to ride 28.5). I think going back to the ... more »

This forum thread has 3 replies.

New thread dropout thinkness 2/17/2014 9:10 PM

i always see frames 3/16 dropouts and others with 4mm, 5mm, ect ect. I always presume 3/16 was thin but im not 100% sure. I went ahead and divided the 3/16 and got 0.1875 hen converted that into mm and got 4.7625. If the math is correct does that mean ... more »

This forum thread has 10 replies.

New thread Switching to lhd.. 2/6/2014 7:25 PM

So I want to switch my hub to lhd but im not sure it is possible. My back hub is a stock cult cc01 back hub in rhd. Would it be possible with any drivers out there? I hope so because i dont wanna keep beating up my sprocket and chain. Any leads to anywhere ... more »

This forum thread has 3 replies.