GorillaKing37's Kink

Had a Shadow halflink on there, but it got all screwed up when I took it off.
Had a Shadow halflink on there, but it got all screwed up when I took it off. Probably gonna put some pegs on there. GorillaKing37's Kink Need to take that bracelet off the seatpost. The bars look too small depending on the angle. I regret putting on all of those stickers. Didn't try too hard to get great shots here. I regret those stickers.
Create New Tag
Parts Brand Model Additional info
Frame Kink Liberty 20.75" TT
Fork Kink Strife
Handlebars Shadow Conspiracy Vultus 9.5" Height
Bar ends ODI Nylon
Stem Madera Mast Top Load 51mm Reach
Grips ODI Longneck
Headset Odyssey Integrated Uses some Mission spacers
Cranks Subrosa Bitchin' 175mm
Bottom bracket Kink BB Spanish 19mm (Shadow dust cover on non-drive side)
Spindle Subrosa Bitchin' Spanish 19mm
Sprocket Premium Gnarstar 28t (FSA 24mm to 19mm adapter)
Chain KMC K710 Kool Chain 1/8"
Pedals Odyssey Twisted PC Zip-ties on the side that I don't stand on. I like to keep one side of my pedals as unworn as possible, so marking lets me keep it in check.
Brake levers Odyssey Monolever Medium I don't usually run brakes.
Brakes Odyssey Evo 2 I don't usually run brakes.
Detangler None
Brake cables Odyssey SLS Linear 60mm
Brake accessories Other 990 Brake Plate I don't usually run brakes. When I do, in order for them to work I have to attach this to the bike. My frame only has a caliper brake mount, so this lets me run 990 U-brakes.
Seat Federal Royale
Seatpost Animal Pivotal 135mm
Seatpost clamp Madera Clamp
Front rim Alienation Black Sheep
Rear rim Alienation Black Sheep
Driver/freewheel Mission Standard 9t
Front hub Mission Stalwart FA 3/8"
Rear hub Mission React 14mm
Front tire Cult Dehart 2.20"
Rear tire Cult Dehart 2.20"
Pegs Mission Stock Don't usually use them. They may actually be Kink, I have no idea. They just came with the bike.
General Info
Model Year 2013
Weight 24 lb 3 oz (10971 g)
Additional Info I had originally replaced the seatpost with that old post Animal used to make that expanded when tightened, but the lower half rusted into the seat tube. I've tried everything to get it out and nothing works. There's an FSA 24mm-to-19mm adapter on the spindle/sprocket. Sorry for the portrait photos. After I get my new wheels and possibly bars I will upload some different photos.
Show More Comment(s) / Leave a Comment