Added reply in a thread did my first 9 set today 11/17/2009 5:51 PM

One time I cracked a crank arm on a 9 =\ No more sets for me

Added reply in a thread Garage Bowl In Progress 11/15/2009 10:33 AM

Looks pretty sick so far. This guy I know has a concrete garage bowl, it's 4 sides and goes up like 1.5 feet from the top of the garage door opening, so you have to open the garage door and climb over a big ass concrete wall to get into it.

Added reply in a thread were to get flour red sunday parts? 11/10/2009 8:40 PM

Looks like someone is looking for Sunday parts because its the cool brand

Added reply in a thread were to get flour red sunday parts? 11/10/2009 8:39 PM

Ross grips and hazard light rims are both made by Odyssey.

Added reply in a thread Sunday Completes... 11/10/2009 8:33 PM

Yup. Looks like they only come in black or one other color, depending on the bike.

Started new thread Sunday Completes... 11/10/2009 8:28 PM

Most of you guys have probably heard Sunday is coming out with complete bikes later this year. By the looks of it, the lowest level one is a complete pile of shit. It honestly seems like they made the name brand parts as cheap and shitty as possible, ... more »

This forum thread has 13 replies

Added reply in a thread Self Film/Edit Backyard Sesh!! 11/7/2009 10:01 PM

Jeez so much hate...why do you people even put the effort into coming on here and bitching about everything Anyways - good riding, the ramp looks sketchy as hell but hey, whatever works

Added reply in a thread someone gimme some suggestions 11/7/2009 9:48 PM

yea the loosefer is fucking sick if you're not one of the people that follows the fads like a religion, you could look at eastern frames...the boss frame looks awesome

Added reply in a thread FUCK 11/7/2009 9:46 PM

Well you really have no one to blame except yourself

Added reply in a thread Help me with my 180s 11/7/2009 9:44 PM

It helps to carve a little bit before you spin, although I don't spin at all, fow 180s or 360s. Just hop, turn your upper body at the hips (look at your shoulder, not behind you), and you'll spin. Spinning is the type of thing that's hard to learn but ... more »

Added reply in a thread maximum height of a bmx rider 11/3/2009 10:16 AM

Chris Doyle is pretty tall too, like 6'3"

Added reply in a thread MY NECK!!!!!!!!!!! 10/31/2009 8:08 AM

of course someone named jackoff would suggest a hot shower

Added reply in a thread just made the switch. 10/30/2009 9:56 PM

Well technically as long as your gearing is in the right proportion it wouldnt make it any easier or harder to pedal. People ride small sprockets so they dont get in the way doing tricks, and because they follow the trends like sheep.

Added a comment about video The Big Big BMX Show Season 2, Episode 4 10/30/2009 9:53 PM

1 orange strawberry
2 http://www.missiong.com/video/The-Daily-Grind-on-Tour
3 atlanta

I should get it because it would fuel me as I RIDE

0 0 0

This video has 175 comments.

Added reply in a thread Low Riders! 10/28/2009 4:32 PM

From what I hear, lower top tubes make tailwhips/decade airs much easier.

Added reply in a thread Is The Kink Liberty A Good Bike? 10/28/2009 4:29 PM

Instead of asking strangers their opinion, take a look at the features and decide for yourself. Does it have sealed hubs/BB (it's a plus if it does)? Does it have a full chromoly frame/forks/bars? Are the bars the and frame the height/length you prefer? ... more »

Added reply in a thread who rides with knee gaskets or shin guards mayb both? 10/28/2009 4:25 PM

ridebmxnc, brave and dumb are pretty much the same thing

tongue
Anyways, I've always been meaning to get a decent pair of knee pads, but I don't know where I would get them other than online.
Added reply in a thread Smiths? 10/25/2009 6:57 PM

Well this is how I learned it...Go like you're gonna do a double peg but hop a little bit higher, then lean forward in the air. Then just learn to move your rear tire over a little bit and you'll get it...It's the type of thing that's hard to learn but ... more »

Added reply in a thread patching tube 10/24/2009 7:50 PM

No, use the duct tape first. The adhesive on duct tape it made of rubber, so when it melts it becomes airtight. Just dont overdo it and and burn another hole in your tube.

Added reply in a thread eastern vs fit 10/24/2009 7:43 PM

I snapped off an Eastern crank arm at the weld and they sent me a new pair for free without any hassle. You have to commend them on their dedication to customer service, but it's stupid to cling to a company like it's a friggin gang or something. Everyone ... more »