Added reply in a thread Sprocket adapter for Sugino 44t Chainring? 11/8/2013 6:32 PM

Thanks

Added reply in a thread Sprocket/chainring still wobbles after installing sprocket adapter 11/11/2013 8:16 PM

Excellent idea. Good job I haven't grinded it yet.

Added reply in a thread Sprocket/chainring still wobbles after installing sprocket adapter 11/11/2013 5:50 PM

Okay I'll do that. Thanks for the advice.

Added reply in a thread Sprocket/chainring still wobbles after installing sprocket adapter 11/11/2013 5:11 PM

I see. Is there any other alternative to grinding it down, such as using a spacer between the sprocket bolt and sprocket? Will that work as well?

Added reply in a thread Sprocket/chainring still wobbles after installing sprocket adapter 11/11/2013 7:30 AM

I was thinking... If I bought a Profile Crank Spider that can be used on 19mm spindles would that mean I won't have to use an adapter anymore?

Added reply in a thread Sprocket/chainring still wobbles after installing sprocket adapter 11/11/2013 7:18 AM

Here are some pics.

sprocket adapter installed sprocket adapter installed (underneath) sprocket adapter becomes loose after sprocket bolt is in sprocket adapter becomes loose after sprocket bolt is in (different ... more »
Started new thread Sprocket/chainring still wobbles after installing sprocket adapter 11/11/2013 6:57 AM

I installed a 23.75mm x 19mm x 6mm sprocket adapter onto my sprocket and I first tried it out without the sprocket bolt and it was turning fine with no wobbles at all. However when I screw in the sprocket bolt, one end of the sprocket adapter comes out ... more »

This forum thread has 10 replies

Added reply in a thread how to install a sprocket adapter? 11/10/2013 12:02 PM

I see. Thanks for the explanation, I appreciate it.

Added reply in a thread how to install a sprocket adapter? 11/10/2013 10:24 AM

Ok, I'll do that once I recieved the adapter. Thanks

Started new thread how to install a sprocket adapter? 11/10/2013 10:14 AM

Hi I have ordered a sprocket adapter which allows for my sugino 44t sprocket to fit my redline 2.5 cranks that have a 19mm spline. I just wanted to know where I install the adapter. Do I place it between the spindle and bearing cup on the drive side? ... more »

This forum thread has 5 replies

Added reply in a thread Sprocket adapter for Sugino 44t Chainring? 11/8/2013 6:34 PM

Arite thanks

Started new thread Sprocket adapter for Sugino 44t Chainring? 11/8/2013 5:28 PM

Hi, I have a 44t Sugino Chainring and spider, and I just wanted to know if I would need a sprocket adapter to install it on my Redline 2.5 cranks with a euro BB. I was previously using the spacers that came with the Redline Crankset and when I was pedalling ... more »

This forum thread has 5 replies

Added reply in a thread Compression Bolt/Cap for Salt AM Front Loading Stem 10/16/2013 1:18 AM

No cap/bolt came with my forks. Anyway I got it sorted now without your help.

Added reply in a thread Compression Bolt/Cap for Salt AM Front Loading Stem 10/14/2013 6:59 PM

I have a Skyway 20" TA Frame and Fork set. Head Tube =74 degrees Seat Post = 71 degrees Top Tube = 21.25” Wheel base = 37.44” Rear End = 14.38” Front End = 23.06” 3/8" dropouts on frame and fork 1-1/8" Integrated headtube

Started new thread Compression Bolt/Cap for Salt AM Front Loading Stem 10/14/2013 6:51 PM

Hi I have bought a new Salt AM front loading BMX Stem 1 1/8TH. The stem however, did not come with a compression bolt/cap. So I just wanted to know what type of a compression bolt I should

This forum thread has 7 replies