Added reply in a thread Plastic Rear Drive side hubguard slipping? 3/24/2021 9:13 AM

Because it's either a huge shipping cost outweighing the price of the part or the lack of shop inventory in my case. But thanks for the advice.

Added reply in a thread Plastic Rear Drive side hubguard slipping? 3/24/2021 6:45 AM

Wish I could, sadly there are no metal drive side guards for my hub, and there are no Universal Drive side guards anywhere near me. I use a metal non-drive guard because I think it is better to buy metal for longevity and durability even if it ''slides ... more »

Started new thread Plastic Rear Drive side hubguard slipping? 3/23/2021 11:46 AM

My Rear DSG is slipping, any way to increase its grip? I've tried scoring it for more grip, but it still keeps slipping. Has anyone encountered this problem, I'm unable to put an extra washer between the hub and the frame. It is a slip-on hubguard, without ... more »

This forum thread has 9 replies

Added reply in a thread Best freecoasters for 2020 ? 8/9/2020 12:44 PM

Thanks, glad to see they are ditching spring setups, but have no new good hubs have come out for the past year? Well except Primo Balance, it seems to be a relatively new hub. Not saying the old ones are bad but they are still selling Primo Freemixes. ... more »

Started new thread Best freecoasters for 2020 ? 8/9/2020 5:56 AM

I'm looking to upgrade my Cult Match freecoaster, for something better . I have seen some innovation like getting rid of spring balls for the clutch and a redesigned clutch, but I kinda fell out of the loop for the past 2 years and I would greatly appreciate ... more »

This forum thread has 13 replies

Added reply in a thread Help , Freecoaster too tight. 3/31/2018 2:20 PM

Shouldnt the non drive side cone press the bearing to the axle where it separates from the part of the axle where spacers sit , because if it does the cone shouldnt push or pull the axle.

There you can see where bearing separates. ... more »
Added reply in a thread Help , Freecoaster too tight. 3/31/2018 2:32 AM

Its V2 Male axle RHD

Added reply in a thread Help , Freecoaster too tight. 3/31/2018 2:32 AM

I always tighten non drive side so it spins the bearing freely , then i put axle in the hub and tighten drive side , but this time its too tight or too loose.

Added reply in a thread Help , Freecoaster too tight. 3/30/2018 9:53 AM

Yes the washer is the right way . Side with a spacer faces bearing and other one touches the frame .

Started new thread Help , Freecoaster too tight. 3/30/2018 1:37 AM

My freecoaster was running smoothly but little loose , so i regreased it and put it back together but it became so tight the driver wouldnt spin and the bearings were too tight , and even if i loosened it, it was still too tight or so loose it could ... more »

This forum thread has 12 replies

Added reply in a thread Help ! Sprocket bolt is coming loose all the time. 3/25/2018 10:12 AM

Thanks.

Added reply in a thread Help ! Sprocket bolt is coming loose all the time. 3/25/2018 10:06 AM

I dont have Loc-tite here .

Started new thread Help ! Sprocket bolt is coming loose all the time. 3/25/2018 10:02 AM

I tighten my sprocket bolt but after some hours it comes loose. It doesnt matter how much i tighten it still comes loose. What are my options ?

This forum thread has 15 replies

Added reply in a thread Thoughts and reviews on the new Cult Crew hubs? 3/22/2018 1:05 PM

Thanks !

Started new thread Thoughts and reviews on the new Cult Crew hubs? 3/22/2018 9:22 AM

Your thoughts or/and reviews about the new Cult Crew hubs? Are they better than the old ones or the same ?

This forum thread has 3 replies

Started new thread Switching from longer TT and CS to shorter your exeperiences? 12/9/2017 1:01 PM

I recently switched my frame from really long chainstay and 21TT to 20.75 and 12.6 . Tricks became easier ,360 became easier and faster, bike became snappier but i cant barspin and 180 tricks as easy anymore. What are your experieces on switching to ... more »

This forum thread has 9 replies

Started new thread Does Toptube change Frame geometry? 12/3/2017 11:27 AM

Does longer or shorter toptube change the standover height or chainstay lenght? Just in case because i need to buy a new frame and im not entirely sure.

This forum thread has 3 replies

Started new thread Freecoaster changes slack?help 10/16/2017 3:17 PM

My freecoaster recently started to slip and change slack. Sometimes its almost 3 full cranks sometimes its stock slack and sometimes its almost instant. I dont know if the problem is in spring or clutch because my spring balls are almost new. Any suggestions ... more »

This forum thread has 4 replies

Added reply in a thread Thoughts on nylon hubguards? 9/30/2017 12:52 AM

Are you talking about GLANDS ? I would use them but they dont sell them here. And i want somthing that goes on the hub and i need something for drive side too.

Started new thread Thoughts on nylon hubguards? 9/29/2017 7:05 AM

I am thinking about buying nylon hubguards for Drive side and front. I am really skeptical about them holding up . I really dont want to waste money if they suddenly break on impact or something else. Also they dont have an inner metal core .

This forum thread has 5 replies