Added reply in a thread Are these wheels decent 8/4/2015 6:11 AM

wheels are fine for what they are selling for, cheap enuff 90 quid for a set of wheels is pretty cheap, don't think you could do any better really

Added reply in a thread Weird noise coming from my cranks? 8/4/2015 6:06 AM

Remove crank, give it a clean and give it a good grease up and re install clean chain, lube it real good....problem solved if the above does not work, then it could be time to replace the BB then kick back and enjoy said pizza......nom nom!

Added reply in a thread someone help me with this.. 7/22/2015 12:49 PM

Drop out is the slot in the frame that the wheel axel sits in

Added reply in a thread Brakes and frame size 7/22/2015 9:50 AM

Just make sure it does not feel cramped when your on the Bmx, try and do some hops and manual the bike if you can. Basically it should feel ok, you should be able to tell if there is any problems, also make sure the bars are big enough and set in a position ... more »

Added reply in a thread Brakes and frame size 7/22/2015 8:48 AM

Buy the spire and buy after market forks with brake mounts and odyssey evo2 or their budget version ( if they are front compatable) if your really wanting front brakes Bmx steve is correct about top tube lengths, but as I said it's personal preference ... more »

Added reply in a thread Brakes and frame size 7/22/2015 8:35 AM

20.6 to 20.75 top tube will be fine, even 21 It just depends, there are other factors to think about as well like CS size HT size, but that will just complicate things A good all round frame seems to be TT 20.6-21 CS 13.5 ST 71 HT 75 Longer the toptube ... more »

Added reply in a thread Brakes and frame size 7/22/2015 6:47 AM

Ok I have had a look, and the spire is good specs wise, I haven't checked your other choices but the spire has full crmo frame and sealed hubs etc

Added reply in a thread Brakes and frame size 7/22/2015 6:42 AM

You could run a frame at 20.5, 20.75 or 21 again this is up to you and the type of riding you are wanting to do like, street, park, dirt I your getting a complete with rear brakes that will be fine, as I said you can up grade parts in the future if you ... more »

Added reply in a thread BMX customization help (ASAP) 7/22/2015 6:30 AM

If you got the cash, go for it I like clean looking setups with little details with colour or designs etc Yeah it would look fine, a little bit of colour won't be over the top Ok with tyre set up, stick with what your set up is size wise

Added reply in a thread (PLEASE HELP ASAP) Cleaning dirty chain?? 7/22/2015 6:24 AM

Just order one anyways, it's a good tool to have in your kit, in all honesty its worth it! Speaking from experience if you you try and remove a chain without the correct tool, you may end up having to buy a new chain cause it gets damaged from knocking ... more »

Added reply in a thread Brakes and frame size 7/22/2015 5:56 AM

Cool, your correct about the gyro mounts on the photo you supplied With back brake, most frames come with removable brake mounts( unless it's a brakeless frame and you won't be able to run rear brakes) so you can have the option to run back brake or ... more »

Added reply in a thread BMX customization help (ASAP) 7/22/2015 5:38 AM

Up to you, the bike looks fine as it is, to be honest, a set of chrome bars would look good with the all black colour scheme If you need new tyres, you could get a set of BSD donnasqueak in grey 2.25, I wouldn't go any bigger on size cause personally ... more »

Added reply in a thread (PLEASE HELP ASAP) Cleaning dirty chain?? 7/22/2015 5:27 AM

Use a chainbreaker it's a lot easier and you won't damage your chain

Added reply in a thread (PLEASE HELP ASAP) Cleaning dirty chain?? 7/22/2015 5:13 AM

Oh forgot to say if you can remove the chain that would be better

Added reply in a thread (PLEASE HELP ASAP) Cleaning dirty chain?? 7/22/2015 5:11 AM

Clean with a degreaser like wd40 or the like, once clean give it a good lubing with a quality chain oil...don't just use wd40 as a lube just use as a cleaner only

Added reply in a thread someone help me with this.. 7/22/2015 5:07 AM

Yeah it will fit, as long as your rear drop out take 14mm which is the standard in most modern frames

Added reply in a thread Brakes and frame size 7/22/2015 5:01 AM

Hi, You'll only need a back brake, if you really want a front brake with brake mounts, I know that bonedeth make forks with brake mounts, you can use a gyro system if the frame has gyro mounts on the head tube of the frame (two holes near the top of ... more »

Added reply in a thread Seat post problem help 7/13/2015 6:34 AM

Get a metal hacksaw blade and try cutting seat post in sections, major pain in the ass tho Or try knocking the seat post down, until you got enough room to add new seat post, I've had to do that to a old metal bikes Kizz frame. Good luck

Started new thread Bone Deth Liiving Dead Frame 20.6 Matt Black 6/25/2015 7:04 AM

For Sale Bone Deth Liiving Dead Alex Liiv Sig Frame in Matte Black Brand New Condition! I decided to change my frame half way through building a new ride. Brake mounts and guide (installed) and gyro mounts, seat post bolt supplied. Headtube Sticker Removed ... more »

This forum thread has 1 reply

Added reply in a thread Volume Vessel Frame V.S. Stranger Ballast Frame 6/23/2015 7:14 AM

Ok didn't know that, I like the splatter effect on the vessel, different strokes for different folks, haha Since both have chain tensioners, go with whatever brand you want to support.