bikerider86

bikerider86

Lives in: Seaford, DE USA

Member since: 07/27/08

Recent Activity Filter:

Reply to what job you got 5/30/2018 4:35 PM

At the time of the original post I was 15 and doing landscaping during the summer. Now i'm a commercial HVAC mechanic. Sadly I get little time to ride these days

Reply to Need a hand from the Canadian bros 12/6/2016 1:24 PM

whoever sent this thread to the guys at BMXCanda you rock!

New thread Need a hand from the Canadian bros 11/27/2016 2:01 PM

Alright guys I need help with a somewhat simple task. I'm looking for a hat. Not just any hat though, I'm looking for a BMX Canada hat. (just like the USA BMX hat but Canada same orginization). It's for a little buddy of mine so if there is any ideas ... more ยป

This forum thread has 5 replies.

Reply to 21" big enough? 8/16/2016 3:46 PM

when i'm not up in PA working we'll have to get together and ride

Reply to 21" big enough? 8/14/2016 7:53 AM

imo that should be plenty big. where in delaware are you?

Reply to If I replace my sprocket do I need to get a new chain? 7/11/2016 2:29 PM

1/8" i recommend a half link for smaller gearing

Reply to Anyone Heard, I mean Remember Osiris? 7/11/2016 2:21 PM

had many pair of their shoes when riding back in the day. what's the thing on the left?

Reply to Smaller Bikes 7/10/2016 4:25 PM

imo a 20.5 would probably suit you. i'm 5'9 and ride a 20.75" frame

Reply to been out of the riding game for about 3 years now what's new? 7/9/2016 2:38 PM

so where is everyone getting parts from now? best place pricewise? selection wise? customer service? i had a bunch of stuff on order from dan's because that's the only place i used to deal with

Reply to Haro model help 7/8/2016 2:07 PM

DK was a better quality bike overall. Certainly lighter it was my first "small gearing" bike with the 39/14 gear. threw everyone for a loop for a while then when 25/9 hit i was the 3rd person around to have it on an old stolen

Reply to Haro model help 7/8/2016 1:31 PM

dang... i had an 09 backtrail x2. the realized haro was poo then bought a DK

Reply to Haro model help 7/7/2016 1:59 PM

i want to say its an F2 because of the f2 in the serial number

Reply to been out of the riding game for about 3 years now what's new? 7/6/2016 12:20 PM

sooooooo had some stuff on order for the bike then saw a set of wheels i wanted for my truck... safe to say the truck wheels won that battle

Reply to Help (Noob Question) 7/6/2016 12:12 PM

or or orrr look under and there will be a bigger bolt (6mm allen head to be exact) and the whole lever will come off

Reply to Keep getting flat tires 6/25/2016 4:57 PM

Stop running over shit lol but in reality check the inside of your tire before you put the tube in, also check the wheel itself too and make sure no spokes are poking through the rim tape. make sure you're not pinching the tube when you put it in

Reply to bb didnt have spacer with it??? 6/20/2016 1:19 PM

use a tubing cutter to cut the spacer. they can be purchased at your local hardware store. clean, straight cuts everytime

Reply to Flangeless vs flanged? 6/19/2016 4:08 PM

i may have to try this

Reply to Flangeless vs flanged? 6/19/2016 12:39 PM

Flangeless here too. the flanges always gave me blisters if i hadn't rode in a while because i grip all the way on the inside

Reply to TOTAL BMX FOR SALE 6/17/2016 5:38 PM

you have a message on here

Reply to delete 6/17/2016 5:33 PM

what spindle size?