Added reply in a thread Lacing the wrong size spokes? 10/6/2021 3:29 PM

You can take the hub with the same flange diameter, put it in a calculator with the Alienation Skylark, and then have your measurements for spoke length.

Added reply in a thread Lacing the wrong size spokes? 10/6/2021 11:49 AM

Samsara is pretty much the same as the Alienation Skylark. Westcoaster is close to the Revolution. I would assume you need DS 184mm and NDS 186mm. You could most likely use the 188 for the NDS, but not for DS. If you have a caliper, measure the outside ... more »

Added reply in a thread WTB: Forks, Cranks, Pedals, Rims, Seats 9/30/2021 3:25 AM

I have black Thunderbolts in 175

Added reply in a thread Help identify this bike 9/24/2021 6:18 AM

Looking at a few parts, makes me think it is a late 90s GT or Schwinn/XS. The diamond plate sprocket is something to note. Google search for Schwinns from that era.

Added reply in a thread Back issues.. 9/22/2021 10:39 AM

L3 L4 L5 discectomy here. Im 34. Had major back problems from riding in my mid 20s. My symptoms were very similar to what you are experiencing. No chiropractor or pt could alleviate the pain and I had to get the surgery. I woke up one day and couldn't ... more »

Added reply in a thread [WTB] [NYC] Sunday Street Sweeper Jake Seeley Leaf colored edition 9/17/2021 6:27 PM

Is this the color you are looking for? If so I would be willing to sell mine

Added reply in a thread My new winter rider. And my first log here ! 9/13/2021 1:18 PM

That stinks, but you are welcome. I have had the extra spindle in my parts bin for a while. Love the build. Especially the kamikaze forks.

Added reply in a thread My new winter rider. And my first log here ! 9/13/2021 12:34 PM

I've got a KHE spindle that should fit. Let me know and I can send it to you.

Added reply in a thread are the sunday darkwave and streetsweeper frames heat treated? 9/9/2021 6:09 PM

https://www.twi-global.com/technical-knowledge/faqs/what-is-the-heat-affected-zone Its the area that gets hot whenever two pieces are wielded together. Failures often happen here.

Added reply in a thread VMX Bike - Advice 9/9/2021 9:01 AM

Shad Johnson at Goods/SnakebiteBMX would be a great resource for you. He has a huge collection of vintage bikes and from what I have read/seen from him, he is extremely knowledgeable. He is a former pro and active on the bmxmuseum forums. I have never ... more »

Added reply in a thread Any advice on tuck no handers? 9/4/2021 4:30 PM

I learned mine to fakie first. Going up a quarter and leaning forward kinda puts the bars where you need them to be. I started with a one hander and then both hands. The biggest issue for me was finding how far to bend over the bars to keep them easier ... more »

Added reply in a thread Varga? 8/31/2021 10:25 AM

https://sundaybikes.com/technology/wave-down-tube/ Some Sunday frames do have gussets. I know the Soundwave v3 has a downtube gusset for sure. I know it doesn't have a top.

Added reply in a thread Brake levers for bars that were cut too short? 8/31/2021 8:31 AM

You are welcome. Im glad it worked out for you.

Added reply in a thread <3 8/30/2021 6:13 AM

Unfortunately no instagram. I dont have any social media. I definitely had some ice cream cake. I actually ate 2 of them. I gained about 20 lbs in the first couple days after. I compete in classic physique. I am also a natural and vegetarian. Here is ... more »

Added reply in a thread Any suggestions? 8/29/2021 10:57 AM

If it is any other manufacturer than Profile, they use metric bolts. You could drill out the bolt completely, and then tap new threads and put a standard bolt from Profile in there. It depends on how much you drill out really

Added reply in a thread To be identified or not to bee 8/26/2021 8:36 AM

A little of topic....but..... I had to order a new lock nut for a Profile hub. I ordered it from online and it didn't end up fitting in the bearing correctly and looked slightly different. It was the only option available online. I emailed Profile and ... more »

Added reply in a thread litewate front rims 8/24/2021 8:35 AM

The lightest weight "litewate" rim is the Premium Samsara. Weighs 14oz which is 405 grams. 1.5 oz less than a Birdcage. Its an aero style with welded seam. You don't have to search any more. Get this

Added reply in a thread Brake levers for bars that were cut too short? 8/19/2021 6:59 AM

https://porkchopbmx.com/dia-compe-brake-lever-reducer-bushing-shim-1-25-4mm-to-7-8-22-2mm-silver/

Started new thread Parts for sale 7/28/2021 8:02 AM

I have a few things for sale. Give me a fair offer. Not sure of pricing Primo 7 series rims with n4fl front and profile mini rear LHD Fly Tractor XL 25t Sunday Sabertooth 27t 175mm Thunderbolts RHD Fit barstool and post Fiend Seat and post KHE arsenic

... more »

This forum thread has 6 replies

Added reply in a thread Brake levers for bars that were cut too short? 7/22/2021 5:05 AM

Let me know when you get it. I shipped out on Tuesday. Sorry DanTheBikerMan. I may have another in my parents garage though. If I find it, I will let you know.