iRace's Forum Activity

Reply to Any other girls around here? 10/14/2012 2:15 PM

Idk if there's any other girls but your bike looks dope af.

Reply to R.I.P. Kyle Bennet 10/14/2012 2:08 PM

correction: *Bennett, and fiance, not his wife.

Reply to If your into drifting 10/1/2012 8:35 PM

Photobucket
Reply to Hub Lock up 9/26/2012 7:57 AM

I bought a profile wheel set from some newb and it locked up on me. Little ass didn't have the tiny washer (and I mean TINY) that rests between the driver and the hub shell. idk if odyssey uses the same kind of equipment

Reply to Good Shoes for riding that have straps 9/26/2012 7:54 AM

Vans Owens hi2. It's actually designed for BMX. I've been riding with the same shoes for an entire year if that says anything. they're indestructible.

Reply to racing bars 9/18/2012 9:37 AM

Keep in mind SBC these aren't just any race bars. Sinz race bars. Sinz parts completely blow. They're cheaply made and the price reflects that. You can ride street with race bars, just get race bars made by companies who also make street components. ... more »

Reply to help airing above coping 9/17/2012 8:02 AM

how i learned was first i started just going up and doing a little hop 180 on it. then i kept going faster. the key is to use the coping. not a lot of people know this, but coping wasn't originally on ramps for grids. hitting the coping on your way up ... more »

Reply to any advice 9/17/2012 7:57 AM

other than this there really is no way to ease into it. a barspin is a barspin. just do it.

Reply to What are some easy tricks ? 9/17/2012 7:56 AM

Dude, fuck tricks. Most people who start riding focus on all the tricks and they don't get any style or flow. You'll see kids who've been riding for years, can whip, bar, tuck, all that but the can't hit a box jump or air a quarter. Go to your local ... more »

Reply to buying a profile 9/17/2012 7:50 AM

http://www.danscomp.com/products-PARTS-HUBSACC/440015/Drop_Out_Spacers.html bam.

Reply to buying a profile 9/17/2012 7:49 AM

profile makes a 14mm female axle conversion kit. A friend of mine ride 3/8 female profiles on a 14mm frame. Im pretty sure dans has it

Reply to when your bike 9/17/2012 7:47 AM

I try to stick to this plan: The only time i work on my setup is during the winter. i.e. I only change shit once a year, then I dial that setup in and ride that for a whole season. Aside from tires, brake pads and grips, nothing changes unless it breaks. ... more »

Reply to Bar catch bar 9/12/2012 8:10 AM

1. Learn how to bar. 2. Go higher. 3. Throw the bars early. Catch them. Throw them again?

Reply to i have a problem with my cranks 9/12/2012 8:08 AM

go to your local shop and ask for crank arm spacers, or, if you have crank spacers on your non drive side, take a few of those and put them on the other side. You will need to know if your spindle is 22mm or 19mm in diameter to get spacers. It should ... more »

Reply to Camshaft Sensor 9/12/2012 7:56 AM

could also be a bad fuel pump.

Reply to [b]SLEEPLESS IN SEATTLE.[/b] 9/11/2012 12:19 PM

Left handed lever?

Reply to fly pantera v3 new edit (cotton candy) 7/24/2012 11:30 AM

The white cranks kinda throw me off. black cranks. aside from that just about the sikkest thing ive ever seen

Reply to help please 4/27/2012 9:20 AM

I don't use a spacer because I had the same issue ans was too lazy to get the right size spacer. sundaybmxRR is right, there is a chance your bearings can get crushed. BUT, as long as you don't over-thighten your cranks you'll be alright. I've used the ... more »

Reply to EA BIKE 4/27/2012 9:01 AM

With all of these little kids shredding scooters now you'd have a better shot getting them to make a scooter game.

Reply to 12.6 pound bike! Lightest bike ever 4/20/2012 7:24 AM

$3K race bikes don't even break the 15lb. mark. You're a newb for thinking it's possible to have a 12.6 pound bike. Most people on hear that say their bike weighs 18 lbs are lying even. Kg means Kilograms, not pounds (lbs.).