Added a comment about video El Sereno Shenanigans 6/25/2012 11:41 AM

lol lil d's back wheel steez

0 0 0

This video has 8 comments.

Became friends with StreetxRider323 2/4/2008 4:00 PM
Added reply in a thread cranks? 12/29/2007 2:38 PM

your absoltly right if you bend or break a 3pc crank most often its under WARRENTY (somthing 1pc cranks dont have) if not you can just buy the part that bent/broke and your riding again a 1 pc if you bend it you can get a brand new one for roughly $20 ... more »

Added reply in a thread Manuals 10/16/2007 3:04 PM

the faster you go its a bit ezer but if you can go slow and manual at about 3-5mph thats hard try to find a slope the manual down make things a bit ezer so you dont have to petal so much then like everyother post says its all in the legs

Added reply in a thread how do u barspins 10/16/2007 2:58 PM

remenber to grab the seat with your knees unless you have your seat attached to your frame then your gonna have problems if your righthanded spin the bars clockwise with your right hand catch with your left and reverse for left hand

Added reply in a thread odyssey hazard hub 10/16/2007 2:52 PM

wow your not asking much are you bolt the hub onto one of the dropouts on the nondrive side of the hub so that the hub is sticking out one side of the frame get a wrench and take off the bolt in front of the driver and pull the driver out pop the new ... more »

Added reply in a thread what to do 8/15/2007 10:59 PM

may i recommend the demolition medial cranks only $126 + shiping and the cheapest sprocket you can get new is the mosh digital 2 unless you get a used one that mosh sprocket aint no joke its thick i dont think you will bend it

Added reply in a thread GOOD TIRE COMBO 8/15/2007 2:21 PM

odessey dirt on the front primo wall on the rear everybody that rides my bike likes it

Added reply in a thread Profile 8T driver for Odyessey cassatte 8/11/2007 3:33 AM

its stupid noone should ever have to ride 28/13 or 28/12 you wont go nowhere

Added reply in a thread 36h or 48h hubs 8/9/2007 2:30 AM

o ic what you mean and ive been runnig 36H for 3years F/R and i only had the rear spokes tighened once because dans-comp dident do it right and the only 36H rim i ever bent was a single wall jalco rim

Added reply in a thread 36h or 48h hubs 8/9/2007 1:20 AM

whats wrong with 36H?

Added reply in a thread eastern atom hubs 7/24/2007 2:31 PM

you would be better off getting a new hub that hub is unsealed it will die in a few months if not less ive seen 4 go out in the last 2 months i rebuilt one but it only lasted another 2 weeks waste of bb's

Added reply in a thread How do i put a pic on this 7/24/2007 2:23 PM

open in paint click image-> strech/skew and shrink it by percentage if its a huge pic then your gonna need to go down to 50% or more then save the pic as a jpeg

Added reply in a thread Casset,Driver 7/24/2007 2:20 PM

yes a cassette is a type of hub but your discription of a driver is a bit vague a driver goes inside the hub theres 2 kinds a 3pc driver is what most stock hubs come with witch is a driver and cog with a lock ring and 1pc drivers are solid cromoly or ... more »

Added reply in a thread cutting axles 7/19/2007 1:28 AM

wrong!! grinder and a file you grind it to where you want it but then you need to file the threads off the end to look like stock or you will have one hell of a time putting the bolts back on i will try to take a pick of my axle to show you what i mean ... more »

Added reply in a thread to buy or not to buy 7/19/2007 1:22 AM

are you hitting your sproket on anything? ive gone through 44T 39T 36T 30T 28T sprokets because i hit stuff and they die the odssey will last for a long time if you can maintain it i have a Mosh justice that uses the same guts as the odyssey's its been

pinch
... more »
Added reply in a thread Profile 8T driver for Odyessey cassatte 7/13/2007 12:18 AM

my friend droped my bike off earlyer today!!! i put everything on shortened the chain got it all together and the pedels dident move...

blink
it appears the driver dont like to be too tight in fact the only way it would work was with a hairs width ... more »
Added reply in a thread Profile 8T driver for Odyessey cassatte 7/9/2007 10:11 PM

heres a really crappy pic of why you need you grind down the bolt [img size=150]http://24.205.15.180/downloads/Pictures/animal22T.JPG[/img]

Added reply in a thread Profile 8T driver for Odyessey cassatte 7/9/2007 8:27 PM

the imperial nano will only work with cranks that have the second bolt and only the animal 22T requires that you grind the bolt head down to clear the chain

Added reply in a thread Profile 8T driver for Odyessey cassatte 7/9/2007 3:18 PM

bump!