Added reply in a thread torn between the volume vessel and the wtp sterling 21", anyone have either of these? 5/9/2015 1:31 PM

My current ride geometry. • 21” TT. • 13.5” rear, 75.0º HA, 71º ST. • 11.5″ BB Height. • Stand over height 8.75″ (centre of BB shell to centre of TT) • Tubing Diameters: TT 31.8mm, DT tapered from 36.0mm-32.0mm, SS 19.0mm taper to 14.0mm, CS 19.0mm taper ... more »

Added reply in a thread torn between the volume vessel and the wtp sterling 21", anyone have either of these? 5/9/2015 1:19 PM

I've only had a couple red lines in my younger years and a colony and a fbm, i haven't rrally ridden enough frames to be able to tell the difference. I don't have too many buddies my age to ride with up here and hardly any different setups to ride and ... more »

Added reply in a thread torn between the volume vessel and the wtp sterling 21", anyone have either of these? 5/9/2015 1:03 PM

I might get the forks from you well see, I want 9 inch bars. And I thought you didn't want to ship to alaska?

Added reply in a thread torn between the volume vessel and the wtp sterling 21", anyone have either of these? 5/9/2015 12:52 PM

This is the verdict and everything I've decided on, i couldn't decide between which stem to get so I'm getting two and I'm in love with merritts new tires so I'm getting both of those as well. Volume vessel frame, 21", flat black Fiend 175mm, clear raw ... more »

Added reply in a thread torn between the volume vessel and the wtp sterling 21", anyone have either of these? 5/9/2015 12:05 PM

That's really good info on the sterling I didn't realize the different angle. I'm favoring the vessel a little more I just wish it came in gloss black. Which size vessel did you get and which color? Have any pics?

Started new thread torn between the volume vessel and the wtp sterling 21", anyone have either of these? 5/8/2015 9:01 PM

On a new frame hunt and I've narrowed it down to 2 frames, the volume vessel and the we the people sterling. Does anyone on here have any expirence with either or the two? Pros and cons? I like that the sterling has a bigger head tube so you don't have ... more »

This forum thread has 23 replies

Added reply in a thread Anyone in Welding Classes 5/5/2015 11:33 AM

Yea true I just would want cleaner parts if I was to build a 100% custom frame. A dremel with the right attachment could clean up just about any tight spot. water jet cuts look alot cleaner minus the little pointy spot where the jet starts and stops. ... more »

Added reply in a thread Anyone in Welding Classes 5/5/2015 9:39 AM

He does make good frames but is a little rough on attention to detail on the chain stay ends and what not. I noticed wavey cuts on the water jet cut parts, i would take the time and make everything look nice and address it as a final product and clean ... more »

Added reply in a thread merritt Brian foster FT1 5/5/2015 9:32 AM

I agree they do look like they would wear out quickly but with today's trails it's mostly all hard pack and you don't use brakes much these were designed with all that in mind. Mostly a trail tire is what I read on them.

Started new thread merritt Brian foster FT1 5/4/2015 8:47 PM

Is anyone else as excited as I am about these tires to release?! I can't get a solid answer from merritt or anyone on the release date from what I gathered on instagram is there was talk about March release and a week from now release. I can't wait for

... more »

This forum thread has 6 replies

Added reply in a thread Trans red btm complete mint condition 5/4/2015 7:30 PM

How much for the profile cranks? I am very interested if the price is right.

Added reply in a thread mutiny spline drive cranks, trade or sell, feeler 5/3/2015 11:15 PM

Little dirty from riding today, and chain lube spray, but will clean up nicely after I disassemble. $140 shipped from alaska to anywhere in the United states, and again that includes the complete crank set, 25 tooth mutiny sprocket, shadow ... more »
Added reply in a thread mutiny spline drive cranks, trade or sell, feeler 5/3/2015 11:07 PM

.

Started new thread mutiny spline drive cranks, trade or sell, feeler 5/3/2015 10:59 PM

This is a feeler. If anyone has a set of stranger mass cranks in gloss raw and wants to trade let's talk. What I have is a black set of 175mm spline drive mutiny cranks. The crank set are in 8.5/10 condition. I am not a grinder or park rider so there ... more »

This forum thread has 3 replies

Added reply in a thread Akimbos, R32's, Fit Bars, FBM Seat, Stolen Pedals 4/27/2015 1:18 PM

Somebody on here awhile back posted a wanted add fo that FBM seat but I can't recall the name of the person

Started new thread 14mm drop out forks 4/27/2015 1:13 PM

diamondback 1 1/8" steerer tube forks for sale. They are for 14mm front axles. No dents or cracks just minor paint blems, i painted them flat black. These are heavyduty (also heavy) forks. I don't have a fork top cap and bolt for it. I have some inserts

... more »

This forum thread has 1 reply

Added reply in a thread Pegs, Sprockets, Bars , Seats/Post PRICE DROP!! 4/26/2015 12:41 AM

I replied to your message, let me know if it went thru. Thanks

Added reply in a thread Pegs, Sprockets, Bars , Seats/Post PRICE DROP!! 4/24/2015 10:21 PM

I want the subrosa skeleton sprocket I'll msg you

Added reply in a thread Subrosa Pandora kit 4/24/2015 10:14 PM

Interested in selling the seat seperate?

Added reply in a thread Shadow Zombie seat with rails..NEW! 4/24/2015 10:12 PM

That is a cool seat, have a post for it too?