Added reply in a thread Pedals with more grip? 2/9/2018 7:11 PM

Flip the pins over so they are all on the same side.

Added reply in a thread Ghetto Filming Setup 2/4/2018 5:09 PM

I have a broken ski pole with a GoPro mount.

Added reply in a thread scratches on my frame how to get rid of them 2/3/2018 10:44 PM

Scratch it so much that you can’t see the original scratch.

Added reply in a thread Shoes- When do you draw the line 1/31/2018 7:11 PM

I felt my pins through my shoos the other day. I'll keep using them until they draw blood or the soles fall off.

Added reply in a thread Today I learnt 1/29/2018 6:22 PM

Nothing today but I learned smith easy 180s a few weeks ago and am starting to get better at them.

Added reply in a thread 34R ORTO CRANKS 1/25/2018 8:04 PM

Thunderbolts.

Added reply in a thread Pedals. 1/21/2018 9:12 PM

Odyssey OGPC. They are plastic with metal pins and don't use bearings. You can also adjust the how much they spin by loosening and tightening the pins or you can remove pins from one side for grinding.

Added reply in a thread 22t sprocket 8t driver? 1/21/2018 9:07 PM

If you do decide to do it, don't get a bolt drive.

Added reply in a thread Shiiiitt! 1/20/2018 10:24 PM

I have that frame. Don’t worry I wasn’t the one that took it from you.

Added reply in a thread newbie tire advice... 1/20/2018 2:11 PM

Shadow valor since your not worried about weight.

Added reply in a thread Steer tube too short 1/18/2018 10:40 PM

My fork was a bit too short because the headtube on my frame was a bit longer. I got the eclat cargo headset and used the only the cap on the left and it enough space for it to work.
Added reply in a thread PSA: Never Tell Anything to a Cop 1/18/2018 8:55 AM

There were some peices of plywood sitting next to a building so I used them to make a run up for a wall ride because the ground was really rough. The building also happened to be a mosque. Some lady who lived at the house behind it accused me of arson ... more »

Added reply in a thread How do I get my fork on 1/17/2018 7:01 PM

Take the bolts out of the stem and put a peice of metal in it. Put a bolt back in on the threaded side of the stem. Tighten it a bit so the stem spreads apart enough for the stem to slide in.

Added reply in a thread KMC 710 kool chain 1/16/2018 6:39 PM

I just got a new sprocket and Hoder chain. i was going to slam it but but I fucked up the half link while putting it on.

Added reply in a thread KMC 710 kool chain 1/16/2018 5:24 PM

I had mine for 2 years before it finally broke. No other chain I’ve had has lasted me anywhere near that long. The animal hoder chain is the same chain and comes in black or gold.

Added reply in a thread Thunderbolts are stuck on 1/16/2018 5:18 PM

Heat them up over a stove then try it. I had the same problem once and that worked. Just remember to grease it before you put them on next time.

Added reply in a thread Custom bikes 1/15/2018 11:27 AM

I have a mutiny frame and I’m liking it a lot so far. Same with my éclat bars and forks. Get odyssey thunderbolt cranks. I’ve been using them for years and never had any problems.

Updated bike check Mutiny Death Grip 1/11/2018 11:35 PM
C138_img_1620
Added reply in a thread Grips 1/11/2018 11:31 PM

I'm not a pussy so I man up and put them on dry.

Added reply in a thread My makeshift "manual machine" 1/11/2018 10:29 PM

I'm shit when it comes to manuals. How much do you want for it?