stahl4130's Forum Activity

New thread Who has a 10t hub? 6/8/2019 12:24 PM

In need of a 10t hub or an old ODSY Hazard hub. V3 or older.

This forum thread has 0 replies.

Reply to Haven't seen any real posts on 22"ers 6/8/2019 12:05 PM

The new Pedal Driven Cycles Operator 22" Frame.

Reply to 22-inch BMX Comprehensive Comparison Guide 5/30/2019 11:15 AM

Be sure to add in the PDC Kool Thing 22 and the Operator 22 frames.

Reply to Bmx with 22”? 5/21/2019 7:11 PM
Reply to Brakes Or Brakeless 4/13/2019 9:04 AM

BRAKES ALL DAY! Front and rear on my park bike and just rear on the bowl/trail bike!

Reply to BMX is missing clothing companies 4/13/2019 8:50 AM

Check out Rider owned owned and operated. We sponsor some of the best guys in the southeast.

Reply to GA? 4/11/2019 2:16 PM

There are loads of us in ATL and Athens Ga. Hit up the Atlanta BMX FB page.

Reply to Macon, warner Robbins, atl ga 4/11/2019 2:14 PM

Not a ton of riders down there these days. There are a few guys that work in Perry.

Reply to Haven't seen any real posts on 22"ers 4/11/2019 1:47 PM

Reply to Haven't seen any real posts on 22"ers 4/11/2019 1:45 PM

Love em! I actually have a signature from from Pedal Driven coming out this spring. Its more of a street geo 22" frame that will have a more aggressive geo.
Reply to What happened with MacNeil ? 4/11/2019 1:26 PM

They had some issues and lost their distro in the US. Thats the long and short of it. Still a good company overall.

Reply to Sposored thread (only comment if you’re sponsored) 4/11/2019 1:22 PM

Was sponsored by someone's mom at one point. So many mom's have come and gone its hard to remember which one now.

Reply to Sluggish tires 4/11/2019 1:17 PM

A higher TPI rating will give you a stiffer casing to the tire. Wider rims support the side wall of the tire as well, allowing for less deformation under stress.

Reply to Sluggish tires 4/11/2019 8:17 AM

Rim width, TPI and pressure all play a hand in the way a tire feels and handles.

Reply to Looking for a rear cassette hub 4/9/2019 1:30 PM

Got a hub. Thanks everyone!

Reply to Looking for a rear cassette hub 4/4/2019 10:05 AM

What do you want for it?

Reply to Looking for 10t RHD hub. 4/4/2019 9:42 AM

Anyone out there?

Reply to Custom Gyro setups 4/4/2019 9:42 AM

I have seen a guy use a Primo Pervert as a cable hanger. Said it took a ton of stretch out of the line.

New thread Custom Gyro setups 3/28/2019 12:29 PM

Just put on a gyro after 15 years of running a straight cable. I bought a Snafu rotor seeing as Odsy stopped making the GTX with the knarps built in. Just wanted to see what everyone was running and what mods you have made.

This forum thread has 11 replies.

New thread Looking for 10t RHD hub. 3/28/2019 12:23 PM

Playing around with gear ratios and have found myself in need of a 10T hub.

This forum thread has 1 replies.