Added a comment to tnp128's bike check 3/28/2020 9:02 AM

I’ve been playing around with tires lately. The front is a 2.4 Hammerhead S. It fits perfectly on the R32 fork. So far the Momentum 2.5 in the rear has worked out pretty good. I go from dirt jumps to park bowls and it hooks up good everywhere. I like a little more aggressive tire in the front but something faster in the back. The momentum does wear out a little fast though. Isaw Kris Fox out at wetlands riding the demolition rig in front and momentum in the rear that’s where I got the idea to try it but the Rig 2.4 rubs a little in the R 32 fork if you run over 65psi and your rim ain’t dead straight which is why I got the hammerhead S. I think I’m gonna stay with the HH up front and Momentum in back for a while. If your curious I’d recommend it.

This setup has 13 comments.

Added a comment to tnp128's bike check 3/27/2020 2:32 PM

Thanks man. I appreciate it.

0 0 0

This setup has 13 comments.

Updated bike check S&M Credence CCR 3/1/2020 6:47 PM
Updated bike check S&M Credence CCR 3/1/2020 6:47 PM
Liked a bike check The official rundown 2/21/2020 5:11 PM
Added a comment to Gary_Bristol's bike check 2/17/2020 9:16 AM

The second picture shows a bracket to which you would mount a kickstand. Which would indicate an entry level or department store bike.

0 0 0

This setup has 1 comment.

Added a comment to NJBMX23's bike check 2/16/2020 11:39 AM

I love the CCR but if I were to get another frame it would probably be a Hartbreaker or a FBM Steadfast. S&M MOD might be pretty cool too. The only problem I have with the CCR is you have 3/8 axel in the rear. I had to build a new wheel when I got the frame. Profile was the only hub I could find with a 3/8 axel.

This setup has 4 comments.

Added a comment to tnp128's bike check 2/16/2020 7:33 AM

I wanted everything to be as clean as possible. I took the Churchill top cap off my other bike and fit it over the new odyssey headset when building the bike because I did not want to cut the steerertube on the forks. With the S&M enduro V2 stem and the odyssey fork bolt everything fit perfect. I then switched to a profile stem and everything still fit perfectly. I contemplated lowering the stack height but would have to either cut the steertube or move a couple spacers over the top of the stem. I normally ran no spacers on my headset with other bikes but I find that with my current setup the bike is still really strong looks clean and way more comfortable on my back. Hope that helps. You can send me a private message if you have any other questions or need a more detailed explanation.

This setup has 13 comments.

Added a comment to tnp128's bike check 2/10/2020 10:46 AM

I didn’t really like the Spectr tires. I got them cause I was riding mostly bowls and I thought they would be faster and grippier than the setup I was running. They made this funny squish sound when carving around the bowl and they just were not confidence inspiring. If you like I can send you a private message with a more detailed review of them.

0 0 0

This setup has 13 comments.

Added a comment to seanbrian's bike check 1/26/2020 7:27 PM

Nice build.
How do you like the MOD compared to the CCR. Do you notice much of a difference with the slightly steeper head angle and shorter rear end.
Seems like you’ve had the BTM CCR and MOD what do you like best. I’ve had the BTM and CCR my riding style leans more toward CCR just curious what you think having had them all.

0 0 0

This setup has 6 comments.

Liked a bike check SBR's S&M Creedence MOD 1/26/2020 7:22 PM
Added a comment to wasabi's bike check 1/21/2020 5:13 PM

It’s an Eastern frame. That is the Eastern logo.

0 0 0

This setup has 2 comments.

Added a comment to tnp128's bike check 1/13/2020 6:23 AM

Thanks.

0 0 0

This setup has 13 comments.

Liked a bike check FIT Hartbreaker 1/12/2020 3:46 PM
Added a comment to NJBMX23's bike check 1/12/2020 3:45 PM

Dope build man. That’s my type of bike. Very similar to what I ride. I ride dirt jumps and concrete bowls. I’ve been messing with different tires lately. Right now I’m running demolition enarson rig in front with momentum in back. I like it. Fast and grippy. Also ran Odyssey aitken front and path pro in rear. That was good too. I even had S&M mainline with speedball in back as well. However I do like front and rear momentum if your riding mostly bowls. Hammerheads are good too front and back. I have a skatepark down the block from my house so it’s easier to just go ride the Concrete bowls.

This setup has 4 comments.

Updated bike check S&M Credence CCR 1/5/2020 6:42 PM
Updated bike check S&M Credence CCR 1/5/2020 6:42 PM
Added a comment to SoloBike's bike check 1/2/2020 6:57 PM

Nice build. I like the tan wall momentum tires.

0 0 0

This setup has 1 comment.

Liked a bike check SBR's S&M BTM 12/31/2019 5:02 PM