Yeah, the D800 better be a killer camera for $3,000. I know a dude with one and it does look like a classy hunk of magnesium alloy. Kris.Y, why did you go from a 5D MKii to a 6D? Does it have something the 5d doesnt?

keep saving, and when you get like $300 get a canon t2i off of craigs list

WOWSERS, if you dont know what you are talking about, please dont try to inform others. There is no need fro 24mp. Noise is not a concern, and cropping wont reduce noise at all, in fact, it will make it more pronounced. It is the size of the files that ... more »

If you want to film at all, go Canon, no questions. If you want to do photo only, you will like the Nikons more. My brother has the D3100, and I have a T3i, so I guess that would make a pretty good source of information when it comes to this stuff. The ... more »

Forging is when they make a mold of the part, and the use a big hammer to pound the metal into the shape. Most stems are CNC cut from a block of metal. Forging can have an advantage because the grain of the metal can add strength because it almost flows ... more »

Its on Ezra's FB, looking at mid-December. Start saving your dolla bills. Also, I do remember seeing something about it being left-right switchable, but we will just have to wait for it to find out

or its stolen. no one seems to ever think of that. If it is an unbelievable deal, than it is unbelievable, if you know what I mean

Just a consideration make stuff in multiples of 4, because a sheet of ply is 4x8' and you dont want to be cutting every board down so you can get 6 a 6 foot wide ramp.

You can already preorder it on Albes. $200 http://www.albes.com/eclat-blind-freecoaster-hub.aspx Sorry, had too. Here it is for real.

And you know this how? I believe it will be on Vein, and we already know that there are going to only be a few. The number 100 comes to mind, but I dont know if it is right or not. Welcome to Vital, by the way. If no one is being mean to you, then you ... more »

Sorry to be jumping in late, but here is my take: Lots of female hubs use 14mm shoulders. You would basically be making a frame for profile hubs. Next, cut that seat clamp down. No need to have it sticking up so high. If someone wants to slam their seat, ... more »

I would like to point out that in 5 years this thread is going to be the most humiliating thing you ever wrote. Please all go back and re-read it. Look at what you thought was cool last year, 5 years ago, 10 years ago. Just saying...

Try leaning back so you pivot, learn half cabs, pedal forward to engage your hub and then pivot. Can you fakie out with a cassette? If not, I think you that you should not be on the coaster.

Or you could try a new bearing for 6.99... but that is probably our of the question because you are way to hardcore for that... try to see the number on the plastic seal, and then look for it on dans, or go to the auto shops and local, friendly ... more »

Thank you for living under a rock. The idea is that freecoasters are oversized when they use the KHE clutch so that is why ezra and eclat made pawl freecoasters. It works like a cassette, but when you back pedal, the pawls retract so you can coast, and ... more »

It was a first 10 orders deal. So probably not, but if you go on their facebook you can find it

You all saw this already, but here is how it works.

You think I wouldn't have bought it all?

All new bro. Sidewall 30% off code.