Back Bentley (now street asf)

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

7/15/2015 11:09 PM

Got the new frame, built wheels.

Main:
Frame: Fit Flow
Bars: Shadow Vultus
Forks: SE Landing gear (Rip Scot)
Cranks: Redline Flight.

Wheels:
Front: Sun Big city to Demolition Phantom, Demolition Machete tire 2.25.
Rear: Sun big city to Cinema ZX. Animal TWW 2.00.

Others:
Grips: Odi Longnecks
Barends: Shadow Deadbolts
Stem: Fit Hightop
Headset: Cult
Brake Lever: Odsy Monolever Small
Cable: Kink
Calipers: Tektro
Pads: Odsy Slim by Fours clear
Seat post: Fly
Seat: Odyssey Galaxy Red
Seat Clamp: Demolition
Bb: Redline
Sprocket: Stolen Sumo
Pedals: Primo Tenderizers
Chain: Kmc 410h

This list is not very final. May switch seats to my old Markit, and the tires are something I'm thinking of changing. Bike isn't 100% together, I'll post pics when it is. And I built the wheels. It was fun. 10/10 would do again for fun.

| Quote

Chelseabmx

117681 Chelseabmx https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/117681/avatar/c50_image_1441068715.jpg?1441068398 https://www.vitalbmx.com/community/Chelseabmx,117681/all 04/18/15 45 1 27 267

Posts: 294

Joined: 4/18/2015

Location: GBR

7/16/2015 9:25 AM

When will pics be up mate?

| Quote

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

7/16/2015 9:50 AM

Chelseabmx wrote:
When will pics be up mate?

Chelseabmx wrote:
When will pics be up mate?

...more

I gotta put brakes, tires, and the chain on.

| Quote

Chelseabmx

117681 Chelseabmx https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/117681/avatar/c50_image_1441068715.jpg?1441068398 https://www.vitalbmx.com/community/Chelseabmx,117681/all 04/18/15 45 1 27 267

Posts: 294

Joined: 4/18/2015

Location: GBR

7/16/2015 10:02 AM

Ok shouldnt be 2 long then? Cant wait to see it.

| Quote

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

7/17/2015 12:00 PM

| Quote

blaaaaaaaaa

103921 blaaaaaaaaa https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/103921/avatar/c50_image_1522863628.jpg?1522863311 https://www.vitalbmx.com/community/blaaaaaaaaa,103921/all 03/14/13 14 4 https://www.vitalbmx.com/community/blaaaaaaaaa,103921/setup 164 4921 4

Posts: 5085

Joined: 3/14/2013

Location: Richmond, VA USA

7/17/2015 12:20 PM

You don't know how to cut cables do you?

| Quote

I love my bike but i hate myself
bike check

IG
@curtis_cantbmxwell
@powersbikeshop

Chelseabmx

117681 Chelseabmx https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/117681/avatar/c50_image_1441068715.jpg?1441068398 https://www.vitalbmx.com/community/Chelseabmx,117681/all 04/18/15 45 1 27 267

Posts: 294

Joined: 4/18/2015

Location: GBR

7/17/2015 1:01 PM

Cables are long but nice setup mate

| Quote

oahz24

113223 oahz24 https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/113223/avatar/c50_Screen_Shot_2015_01_07_at_19.33.07_1451007947.jpg?1451007894 https://www.vitalbmx.com/community/oahz24,113223/all 11/02/14 2 10 246 1

Posts: 256

Joined: 11/2/2014

Location: San Jose, CA USA

7/17/2015 1:24 PM

Those forks look sick and the seat fits perfectly.

| Quote

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

7/17/2015 2:56 PM

blaaaaaaaaa wrote:
You don't know how to cut cables do you?

blaaaaaaaaa wrote:
You don't know how to cut cables do you?

...more

If I cared I would have cut it down. No offense, I like your riding and you seem cool, but why so salty?

| Quote

tomdon

91070 tomdon https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/91070/avatar/c50_442481FCBF683345FAC307E0EF17B124E59D882A689BFC6EE3_pimgpsh_fullsize_distr_1421888027.jpg?1421887288 https://www.vitalbmx.com/community/tomdon,91070/all 02/29/12 8 https://www.vitalbmx.com/community/tomdon,91070/setup 148 5571 6 1 24

Posts: 5719

Joined: 2/29/2012

Location: NY, USA

7/17/2015 2:59 PM

Looks good. And who cares if you cut your cable? I don't care and don't cut mine either

| Quote

I'm on the vital legit list!

dave lawrence

20481 dave lawrence https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/20481/avatar/c50_Cartoon_BMX_1615901644.jpg?1615900811 https://www.vitalbmx.com/community/dave-lawrence,20481/all 05/23/08 120 39 1 https://www.vitalbmx.com/community/dave-lawrence,20481/setup 263 21168 611 2 32

Posts: 21431

Joined: 5/23/2008

Location: Royalton, MN USA

Moderator

7/17/2015 3:56 PM

You can do a Ryan Nyquist impression with that cable!

| Quote

"Hey anybody ever make that mistake like right when you wake up in the morning and you believe in yourself?" -Kyle Kinane

"BIKES!" -Tom Segura

blaaaaaaaaa

103921 blaaaaaaaaa https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/103921/avatar/c50_image_1522863628.jpg?1522863311 https://www.vitalbmx.com/community/blaaaaaaaaa,103921/all 03/14/13 14 4 https://www.vitalbmx.com/community/blaaaaaaaaa,103921/setup 164 4921 4

Posts: 5085

Joined: 3/14/2013

Location: Richmond, VA USA

7/17/2015 5:23 PM

blaaaaaaaaa wrote:
You don't know how to cut cables do you?

blaaaaaaaaa wrote:
You don't know how to cut cables do you?

...more

biggybuggy wrote:
If I cared I would have cut it down. No offense, I like your riding and you seem cool, but why so salty?

biggybuggy wrote:
If I cared I would have cut it down. No offense, I like your riding and you seem cool, but why so salty?

...more

Thanks man. I'm not salty, i'm just saying that's a long ass cable!

| Quote

I love my bike but i hate myself
bike check

IG
@curtis_cantbmxwell
@powersbikeshop

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

7/17/2015 7:20 PM

blaaaaaaaaa wrote:
You don't know how to cut cables do you?

blaaaaaaaaa wrote:
You don't know how to cut cables do you?

...more

biggybuggy wrote:
If I cared I would have cut it down. No offense, I like your riding and you seem cool, but why so salty?

biggybuggy wrote:
If I cared I would have cut it down. No offense, I like your riding and you seem cool, but why so salty?

...more

blaaaaaaaaa wrote:
Thanks man. I'm not salty, i'm just saying that's a long ass cable!

blaaaaaaaaa wrote:
Thanks man. I'm not salty, i'm just saying that's a long ass cable!

...more

Ok. Cool man.

| Quote

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

7/19/2015 8:26 PM

Rode all day yesterday, headset came loose because I have to run a spacer on top ofvthe stem and it slipped.... But I fixed that, and got new gaps down because this frame is so comfy and natural feeling.

| Quote

Brian_Griffin

103354 Brian_Griffin https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/103354/avatar/c50_89d007ae78b555e64029fde9c4d68d49_1476638444.jpg?1476638117 https://www.vitalbmx.com/community/Brian-Griffin,103354/all 02/22/13 2 22 https://www.vitalbmx.com/community/Brian-Griffin,103354/setup 49 740 2 2

Posts: 789

Joined: 2/22/2013

Location: Fredericksburg, VA USA

7/20/2015 5:59 PM

I see you're running the TTW tire. How's it holding up in the dirt?

| Quote

F¬ Bom 5403692331

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

7/20/2015 8:13 PM

Brian_Griffin wrote:
I see you're running the TTW tire. How's it holding up in the dirt?

Brian_Griffin wrote:
I see you're running the TTW tire. How's it holding up in the dirt?

...more

It's been pretty good. Just don't expect to be ripping trails with really rough dirt and shallow berms. Like lots of little rocks and dirt clods. But if it's a smooth, perfect set of trails, smooth dirt, good flow, I prefer them over a more aggressive tire in the rear. The side tread really helps out.

| Quote

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

7/22/2015 10:59 PM

Got new pedals. The old ass primo Tenderizers bearings quit. So I went to my lvscand picked up generic odsy twisted pedals in black

| Quote

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

8/11/2015 8:58 PM

Took this pic today and thought it looked pretty rad.

| Quote

dkTechEthan

108982 dkTechEthan https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/108982/avatar/c50_008efedfd9d48d0c9e18e05903388357_1424155088.jpg?1424155074 https://www.vitalbmx.com/community/dkTechEthan,108982/all 11/20/13 20 1 https://www.vitalbmx.com/community/dkTechEthan,108982/setup 148 1301 9

Posts: 1449

Joined: 11/20/2013

Location: Manassas, VA USA

8/12/2015 8:25 AM

| Quote

"The D.O.P.S. System"
DK, Odyssey, Profile, Shadow.
check out my bike check
@ethanbrackett
@powersbikeshop

BMXism

36778 BMXism https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/36778/avatar/c50_20200207_154625_1581492898.jpg?1581492179 https://www.vitalbmx.com/community/BMXism,36778/all 12/01/08 11 https://www.vitalbmx.com/community/BMXism,36778/setup 80 3075 228

Posts: 3155

Joined: 12/1/2008

Location: Narp, ALA

8/13/2015 4:50 PM

Tits bro. My kind of colors.

| Quote

FREE not under the control or in the power of another; able to act or be done as one wishes
STYLE a particular, distinctive, or characteristic mode of action or manner of acting

Flea

113149 Flea https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/113149/avatar/c50_fbmogheader_1413941088.jpg?1413940139 https://www.vitalbmx.com/community/Flea,113149/all 10/21/14 1 11 270

Posts: 281

Joined: 10/21/2014

Location: Woodbridge, VA USA

8/16/2015 8:23 AM

Chrome and black always look good together, nice ride man

| Quote

My FBM bike check

kink dink

120914 kink dink https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/120914/avatar/c50_IMG_20150819_151247_1440056777.jpg?1440056757 https://www.vitalbmx.com/community/kink-dink,120914/all 08/19/15 1 3 4

Posts: 4

Joined: 8/19/2015

Location: Maybe, MI USA

8/20/2015 12:41 AM
Edited Date/Time: 8/20/2015 1:47 AM

Nice nigga

| Quote

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

8/20/2015 8:54 PM

Thanks guys. Thinkin about wrapping the wheels in some gum hawks, but I'm not sure.

| Quote

adfkje

111978 adfkje https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/111978/avatar/c50_53ce5bf03b73b_1417316861.jpg?1417316424 https://www.vitalbmx.com/community/adfkje,111978/all 06/17/14 1 84 325 2 2

Posts: 409

Joined: 6/17/2014

Location: USA

8/28/2015 4:40 PM

biggybuggy wrote:
Rode all day yesterday, headset came loose because I have to run a spacer on top ofvthe stem and it slipped.... But I fixed ...more

biggybuggy wrote:
Rode all day yesterday, headset came loose because I have to run a spacer on top ofvthe stem and it slipped.... But I fixed that, and got new gaps down because this frame is so comfy and natural feeling.

...more

Did it slip because it wasn't tightened enough, or is that just a bad idea to put a spacer between stem and fork-bolt?

| Quote

My favorite bike

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

8/28/2015 11:20 PM

biggybuggy wrote:
Rode all day yesterday, headset came loose because I have to run a spacer on top ofvthe stem and it slipped.... But I fixed ...more

biggybuggy wrote:
Rode all day yesterday, headset came loose because I have to run a spacer on top ofvthe stem and it slipped.... But I fixed that, and got new gaps down because this frame is so comfy and natural feeling.

...more

adfkje wrote:
Did it slip because it wasn't tightened enough, or is that just a bad idea to put a spacer between stem and fork-bolt?

adfkje wrote:
Did it slip because it wasn't tightened enough, or is that just a bad idea to put a spacer between stem and fork-bolt?

...more

Bad idea. It made wierd grooves in the stem.

| Quote

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

8/28/2015 11:24 PM

I have two mpegs, a merritt tension gaurd, and a DG infinity gaurd in the mail. And if anyone could tell me how v monster v2 tires grip, that'd be great. Lookin for a skinnier front tire.

| Quote

Coopers25

109027 Coopers25 https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/109027/avatar/c50_cultoween8_1417242332.jpg?1417241357 https://www.vitalbmx.com/community/Coopers25,109027/all 11/24/13 1 https://www.vitalbmx.com/community/Coopers25,109027/setup 25 884 1 3

Posts: 909

Joined: 11/24/2013

Location: Santa Ana, CA USA

8/29/2015 12:31 PM

No street enough needs 2 more pegs plastic sleeves and a freecoaster. im kidding cant wait to see it dude

| Quote

Benny Hill bike check

Fiending bike check

adfkje

111978 adfkje https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/111978/avatar/c50_53ce5bf03b73b_1417316861.jpg?1417316424 https://www.vitalbmx.com/community/adfkje,111978/all 06/17/14 1 84 325 2 2

Posts: 409

Joined: 6/17/2014

Location: USA

9/3/2015 12:16 PM

biggybuggy wrote:
Rode all day yesterday, headset came loose because I have to run a spacer on top ofvthe stem and it slipped.... But I fixed ...more

biggybuggy wrote:
Rode all day yesterday, headset came loose because I have to run a spacer on top ofvthe stem and it slipped.... But I fixed that, and got new gaps down because this frame is so comfy and natural feeling.

...more

adfkje wrote:
Did it slip because it wasn't tightened enough, or is that just a bad idea to put a spacer between stem and fork-bolt?

adfkje wrote:
Did it slip because it wasn't tightened enough, or is that just a bad idea to put a spacer between stem and fork-bolt?

...more

biggybuggy wrote:
Bad idea. It made wierd grooves in the stem.

biggybuggy wrote:
Bad idea. It made wierd grooves in the stem.

...more

I was more interested in strength/safety, do you think it compromised the itnegrity of that area by putting the spacer there? I LOVE my stem, but some scuffs don't bother me.

| Quote

My favorite bike

biggybuggy

107501 biggybuggy https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/107501/avatar/c50_2015_08_21_09.27.43_1_1440912113.jpg?1440911743 https://www.vitalbmx.com/community/biggybuggy,107501/all 08/13/13 1 334 4224 1

Posts: 4558

Joined: 8/13/2013

Location: Fallon, NV USA

9/3/2015 5:21 PM

adfkje wrote:
Did it slip because it wasn't tightened enough, or is that just a bad idea to put a spacer between stem and fork-bolt?

adfkje wrote:
Did it slip because it wasn't tightened enough, or is that just a bad idea to put a spacer between stem and fork-bolt?

...more

biggybuggy wrote:
Bad idea. It made wierd grooves in the stem.

biggybuggy wrote:
Bad idea. It made wierd grooves in the stem.

...more

adfkje wrote:
I was more interested in strength/safety, do you think it compromised the itnegrity of that area by putting the spacer there? ...more

adfkje wrote:
I was more interested in strength/safety, do you think it compromised the itnegrity of that area by putting the spacer there? I LOVE my stem, but some scuffs don't bother me.

...more

No. It just didn't work well. The scuff/groove was just where it would slip into and get worse, then the spacer would move that tiny bit down, and one session later my headset would be loose. But that might be because my stem is completely pinched. Still, it didn't work well, looked bad, and cutting down your steer tube isn't very hard.

| Quote

biggybuggy