Forum Main General BMX Talk 3/32" Driver for Match/Mix Hub?

3/32" Driver for Match/Mix Hub?

Related:
Edit Tags Done
Create New Tag
Edit Tags Done

realityisajoke

Vital BMX member realityisajoke 104568 realityisajoke https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/104568/avatar/c50_image_1387417510.jpg?1387417063 https://www.vitalbmx.com/community/realityisajoke,104568/all 04/09/13 1 7 https://www.vitalbmx.com/community/realityisajoke,104568/setup 20 466 5 2

Posts: 486

Joined: 4/9/2013

Location: OH, USA

3/27/2014 1:51 PM

Alright so I love my KMC 415H Chain, but would like to maybe get a different driver to better fit the 3/32" size, rather than the normal 1/8. I will hopefully be getting a 3/32 sprocket as well. would like to stay with 9t driver.
My rear hub is a RHD Cult Match Cassette. both primo and cult dont seem to make a 3/32 driver, and the only ones i can find are race ones that probably wouldnt fit either. is this possible? or should i just stick with the 1/8 on the back? and is it damaging to ride 3/32 chain with 1/8 driver? sorry for the questions, rear hubs are one of the bits my knowledge is pretty lacking.

|


Insta: @devicacy

Xxohioanxx

Vital BMX member Xxohioanxx 84146 Xxohioanxx https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/84146/avatar/c50_pfp_1624598100.jpg?1624598008 https://www.vitalbmx.com/community/Xxohioanxx,84146/all 08/27/11 21 https://www.vitalbmx.com/community/Xxohioanxx,84146/setup 62 5820 60 17 5

Posts: 5882

Joined: 8/27/2011

Location: Columbus, OH USA

3/27/2014 2:28 PM

The 415H is 3/16", not 3/32". I could be wrong but I don't think a 3/16" cassette driver has been made. Possibly one offs and such but nothing widely available. You'll be fine with 1/8".

|

realityisajoke

Vital BMX member realityisajoke 104568 realityisajoke https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/104568/avatar/c50_image_1387417510.jpg?1387417063 https://www.vitalbmx.com/community/realityisajoke,104568/all 04/09/13 1 7 https://www.vitalbmx.com/community/realityisajoke,104568/setup 20 466 5 2

Posts: 486

Joined: 4/9/2013

Location: OH, USA

3/28/2014 12:28 AM

Xxohioanxx wrote:

The 415H is 3/16", not 3/32". I could be wrong but I don't think a 3/16" cassette driver has been made. Possibly one offs and ...more

...more

Oh. Right. Duh. Like i said, my knowledge of rear hubs and gearing and shit is quite minimal! Thanks for the help

|


Insta: @devicacy

HardBMX_Tim

Vital BMX member HardBMX_Tim 106966 HardBMX_Tim https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/106966/avatar/c50_IMG_20170731_111316_475_1511907006.jpg?1511906984 https://www.vitalbmx.com/community/HardBMX-Tim,106966/all 07/15/13 23 https://www.vitalbmx.com/community/HardBMX-Tim,106966/setup 464 7378 2 7

Posts: 7842

Joined: 7/15/2013

Location: Saint Louis, MO USA

3/28/2014 4:28 AM

3/32

|




Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx


Forum Main General BMX Talk 3/32" Driver for Match/Mix Hub?

The Latest