Any sites that list bars by up- and back- sweep?

Related:
Create New Tag

3/12/2016 12:27 PM

Ok so I cracked my stem and, while looking for new stem, decided I should finally pick my 'final' bars before choosing appropriate stem. So I have vultus (3deg up, 10deg back) and lumberjack bars (1deg up, 12deg back), and have decided I want something with the bigger up-sweep like vultus, but more backsweep like lumberjacks - something like 2.5-3.5deg upsweep and 11.5-12.5deg backsweep would be perfect (bar height isn't much of an issue, because usually they come in multiple sizes and I'd be choosing my stem to-fit based around the bars, and already know where I like my grips' height and reach to be)

Any suggestions on specific bars, or better yet, on any sites or jpg's that organize bars by these angles would be greatly appreciated!

|

3/12/2016 12:41 PM
Edited Date/Time: 3/12/2016 12:41 PM

I don't know if any site do that, source bmx can list them by height and width, and you can pick multiple choices, for the around height than you want then, check them all to see the up and backsweep specs...

Also I got a bar in mind, that fit what you want, the Flybikes Devon Smillie 9" / 29" / 12° / 3°

|

3/12/2016 4:16 PM

Danscomp lists them

|

I haven't rode in forever so I suck and I have 2 Hondas. Follow me on Instagram @softtop2k.417

3/13/2016 12:48 AM

Depending on what height you want, look at the fbm u.s.apes and s&m credence. If they made u.s.apes in 8.5" I'd never need another pair of bars

|

3/13/2016 4:49 AM

|

It’s all bmx

3/19/2016 4:08 PM

Francky wrote:

I don't know if any site do that, source bmx can list them by height and width, and you can pick multiple choices, for the around height than you want then, check them all to see the up and backsweep specs...

Also I got a bar in mind, that fit what you want, the Flybikes Devon Smillie 9" / 29" / 12° / 3°

thanks will chekc them out (are they a legit brand, 'flybikes'? Never heard of them..)

|

3/19/2016 4:11 PM

grumpySteve wrote:

Depending on what height you want, look at the fbm u.s.apes and s&m credence. If they made u.s.apes in 8.5" I'd never need another pair of bars

Why do you say that re height? Right now, I like the grip-height i get from my 25mm rise stem with 9" bars - when I choose my new bars, I'm just going to buy my stem to match that! Or you just like your stem adn don't wanna swap it?

|