Brakes

Related:
Create New Tag

7/4/2013 9:35 PM

Im trying to dial my gyro in, so it feels real nice. But gyro is rubbing agaisnt my top tube. I have a dual bottom and top cable. I can seem to make the gyro go up and make my brakes feel good. Please help

|

7/4/2013 10:03 PM

ill try to explain this best i can.
put the detangler piece on so it sits on the gyro tabs of the frame.
then dial in the top cables so the detangler stays where you set it.
then adjust your bottom cables one at a time. after youve done both see how it pulls and fine tune with barrell adjusters if necessary.
if it doesnt retract then you need more tension in your brake arms.
its very overthought. brake setup really isnt hard. just requires focus and patience

|

I'm on the vital legit list!

7/5/2013 10:53 AM
Edited Date/Time: 7/5/2013 11:08 AM

tomdon wrote:

ill try to explain this best i can.
put the detangler piece on so it sits on the gyro tabs of the frame.
then dial in the top cables so the detangler stays where you set it.
then adjust your bottom cables one at a time. after youve done both see how it pulls and fine tune with barrell adjusters if necessary.
if it doesnt retract then you need more tension in your brake arms.
its very overthought. brake setup really isnt hard. just requires focus and patience

Thank you that helped alot but now how do i get rid of gyro wobble becuase thats the part that gets close to touching my frame. But it doesnt touch anymore.

|