Posts: 1
Joined: 5/18/2014
Location: GBR
Hello i just bought those cranks, installed and big problem shows in. You Can see on the video what's going on.
Posts: 289
Joined: 7/17/2012
Location: DEU
You have to install them you know. You can't say there's a problem without installing them because the pressure will be way higher than you can with your fingers.
Posts: 5882
Joined: 8/27/2011
Location: Columbus, OH USA
B(avaria)mx wrote:You have to install them you know. You can't say there's a problem without installing them because the pressure will be way ...more
"When crank is installed problem is the same."
Are you trying to exceed my ability to be a fucking douche? Because you won't beat me.
Posts: 280
Joined: 1/3/2014
Location: IN, USA
i had that same problem with my fly dolmen cranks. emailed fly and they said its a manufacturer's defect and will give me a new set under warranty. contact odyssey, i bet they'll give you another pair
You're never too old to have fun.
Bike
Summer riding
Posts: 4026
Joined: 5/6/2012
Location: GBR
I Have Flatware Twoms There Predecessor Brilliant Cranks. To Me, It Looks Like Your Socket Drive Adapter Is Too Long! It's Sticking Out Past The Sprocket Which Obviously Is Fucking With Your BB Cone & Making It Hard To Install, I Have The Bad News That Basically, They Will Never Work Like That. You'll Have To Contact Odyssey, Send Them Those Photo's & Explain You Believe There's A Defect & You're Gunna Need A Replacement Please. Odyssey Have One Of The Best Warranties In The Business, They'll Make Sure You're Sorted Out Mate.
My Main Piece Of Advise IS... Don't Be A Dick! Be Polite, Explain It To The Best Of Your Knowledge & Understanding & Explain It Wont Work & Those Photos MUST Be Sent, It Pretty Much Secures That There IS A Defect That Needs Putting Right!
Posts: 4026
Joined: 5/6/2012
Location: GBR
Actually... Your Sprocket Might Be At Fault Here Come To Think Of It.... Your Sprocket Might Be Literally 1mm Out & You're Fucked Haha! I Think I'd Actually Put Money On Your Sprocket Being The Problem Here!
Posts: 5882
Joined: 8/27/2011
Location: Columbus, OH USA
Posts: 289
Joined: 7/17/2012
Location: DEU
B(avaria)mx wrote:You have to install them you know. You can't say there's a problem without installing them because the pressure will be way ...more
Xxohioanxx wrote:"When crank is installed problem is the same."
Are you trying to exceed my ability to be a fucking douche? Because you won't ...more
I probably didn't even fancy to read the text. Not even sorry
