Creepozoid V1 Frame Brake mounts problem

Create New Tag

6/11/2013 3:00 PM

Hi guys,

I recently wrecked the thread on one of my brake mounts, I managed to source the bonedeth brake mount kit,but it is a different type of brake mount.

It doesn't fit on my frame and the mounts are completely different to the mounts I have.

Ive got the creepozoid V1 frame which comes with threaded brake mount with internal threading and separate shaped washer

I'm basically with out my ride until I can get my brakes back on, I don't run brakeless.

Any help or advice guys?



6/11/2013 10:31 PM

Email Bonedeth.


6/11/2013 11:09 PM

Yeah I have, but the Bone death crew are on tour at the moment,
I thought I would give the forum a shot to see if anyone has come across the same problem



6/13/2013 8:38 AM


I'm just back from my local bike shop, I got a hold of a set BSD brake mounts,
They seem to do the trick and fit ok...result!

I'm a happy bunny now.


6/13/2013 9:18 AM

Glue them in, and you won't have to worry about them ever again.


6/13/2013 10:17 AM
Edited Date/Time: 6/13/2013 10:18 AM


Yeah I was thinking about doing that, I just don't want to use glue on my frame.
Maybe I'll get some lock tight stuff.

I've got the brakes on and the brakes are working but I'm still not 100% happy with them


6/13/2013 1:00 PM

you could weld them in?


Old bike VVV

California Living

I now have a more or less stock sunday scout with a complete Demo rear wheel. Sue me

6/14/2013 6:25 AM

Yeah I could but the brakes seem ok at the moment, fingers crossed!
I'll see how they hold out and I may go down the glue route, if they screw up.
Thanks for all your ideas guys