Female Cone nuts

Related:
Create New Tag

2/23/2014 1:42 AM

I have the BSD female street front hub and i was wondering how i take the cone nuts off so i can put hubguards on

|

2/23/2014 1:54 AM

Take an allen key, whichever fits it, and turn it the opossite way that the clock spins.

|

RIDE OR DIE



THE ROUTER

Instagram: Luislorentebmx

2/23/2014 2:25 AM

T-rider wrote:

Take an allen key, whichever fits it, and turn it the opossite way that the clock spins.

ok cheers mate, ill have to go and buy a new set of allen keys then

|

2/23/2014 4:58 AM

You can also do it with a proper wrench

|

RIDE OR DIE



THE ROUTER

Instagram: Luislorentebmx

2/23/2014 5:08 AM

I just used my fingers to slide it off, im pretty sure you could do the same.

|

2/23/2014 5:34 AM

Forever360 wrote:

I just used my fingers to slide it off, im pretty sure you could do the same.

LOL, if they are tight you definitely cant do it

|

RIDE OR DIE



THE ROUTER

Instagram: Luislorentebmx

2/23/2014 11:39 AM

T-rider wrote:

Take an allen key, whichever fits it, and turn it the opossite way that the clock spins.

You have no clue what you are talking about. Just stop.

OP, thread your axle bolt in about half way and then hit it with a hammer. Pressfit hardware usually requires tapping out the whole axle. You can try pulling them off by hand or prying them off with a flathead screwdriver but it will probably do no good.

|




Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx