Posts: 1042
Joined: 12/12/2011
Location: Clearwater, FL USA
Opinions? Might Be Trading For My Os v3
Text For Faster Response (727) 218 4305
Follow Me On Instagram - @Marcog_727
Refs–
Sold : Mrhavoc1988, Skubasteve, Joe_Martinez, -Havok-
Bought : ii Krxfted, Tomdon, SnM An1mal, ScramHype, Ecuadevil, TheHorrorContract
Traded : Wolfen, Kevin_Burnett, The_Bmxist, Wilberto_Mora, Mobking, Joe_Martinez
Posts: 1260
Joined: 5/5/2012
Location: AUS
Completely different geo to the os.
I'd do it but I like twitchy frames since I don't go fast
I'm a punk bmxer, I can't do it well so I do it loud.
Posts: 7735
Joined: 7/17/2011
Location: CAN
Good ; Fit , American Made , Street Geo.
Bad :
Instagram : braydenbuckingham
My Cult 2 Short
Posts: 185
Joined: 1/21/2013
Location: Str8 Outta Compton, CA USA
Brayden_Buckingham wrote:Good ; Fit , American Made , Street Geo.
Bad :
Since when is the Marv American made?
Posts: 647
Joined: 12/28/2013
Location: Edmonton, CAN
The Marv is made in Taiwan. It's just like the Fit Wifi with a slightly higher standover. It was a limited edition frame made for Marv who rode for Fit at the time in the UK. On one side it says The Duke of Wellington which was his favourite pub as far as I understand.
It's really a great frame and the stickers on it are awesome. It will feel much more responsive than your OS, so if you ride a lot of park and street I bet you will like it.
Chris
www.bmxtransition.com
Canadian BMX Mailorder
Instagram: @transitionbmx
Posts: 4026
Joined: 5/6/2012
Location: GBR
I had a Marv Frame, I handed it on to Zach P.D on here who actually has a Bike Check of it up right now!
GREAT Frame, The Stand Over Height was a little weird for Me to get used to 8.9" when used to Riding Flatland & Super Small Tech Street Frames! But It's not that bad actually, You might just want to lower Your Seat a lil bit!.. The 13.1" Chain Stays are LUSH! Manuals are piece of PISS to do! It DOES however take a little getting used to when Your used to a 13.75"/13.5" Chain Stay'd Frame! The Steep Head Tube Angle 75.5, It's half a degree, literally a 75 Degree Frame with Primo Strands is steeper than the 75.5 even with say R-25's! It really doesn't take that much getting used to AT ALL!.. The Cult Is a Great Frame, as is the Marv! You aren't loosing out either way!
Posts: 1042
Joined: 12/12/2011
Location: Clearwater, FL USA
Sweet. You know anything about the BSD forever v2? Local has one and I'd rather do a local in order to not go through the shipping hassle
Text For Faster Response (727) 218 4305
Follow Me On Instagram - @Marcog_727
Refs–
Sold : Mrhavoc1988, Skubasteve, Joe_Martinez, -Havok-
Bought : ii Krxfted, Tomdon, SnM An1mal, ScramHype, Ecuadevil, TheHorrorContract
Traded : Wolfen, Kevin_Burnett, The_Bmxist, Wilberto_Mora, Mobking, Joe_Martinez
Posts: 4026
Joined: 5/6/2012
Location: GBR
BSD make QUALITY Parts! I was running almost everything BSD made at one point a few years back! The Forever Frames are pretty "Standard" Geometry, they are WORLDS apart from the Marv & Actually pretty different to Your OS! Kinda "Slack" I guess You could call it, waaay more stable & less Poppy, Responsive, Tech etc! If You were going for a Trade I would HIGHLY recommend You go with the Marv over the Forever! IF You decided against the Marv, KEEP THE OS!!!! I can almost Guarantee You will NOT get along with the Forever!
Posts: 1042
Joined: 12/12/2011
Location: Clearwater, FL USA
Sweet, Thanks Dude! Most Likely I'll Go With The Marv
Text For Faster Response (727) 218 4305
Follow Me On Instagram - @Marcog_727
Refs–
Sold : Mrhavoc1988, Skubasteve, Joe_Martinez, -Havok-
Bought : ii Krxfted, Tomdon, SnM An1mal, ScramHype, Ecuadevil, TheHorrorContract
Traded : Wolfen, Kevin_Burnett, The_Bmxist, Wilberto_Mora, Mobking, Joe_Martinez
Posts: 2541
Joined: 10/20/2011
Location: Los Alamos, NM USA
I love the geo on the Forever. Pretty close to what I currently ride.
"Let it be heard: FOUR IS BACK MUH FUCKAZ"
Refs: Mobking, four, tomdon, Sickdude, xxOhioanxx onetrykid Krisner BMX
FBM Pizza Beer Roast Machine
Posts: 7735
Joined: 7/17/2011
Location: CAN
Posts: 1928
Joined: 12/26/2012
Location: GBR
As Topsey said, I have it. And the first thing i said to Jon after building/riding it is that I was in love with it. I couldn't go back to anything with a CS longer than 13.75 now lol.
Bruh
Posts: 4847
Joined: 2/7/2013
Location: ESP
Posts: 229
Joined: 11/2/2013
Location: ESP
Topsey wrote:BSD make QUALITY Parts! I was running almost everything BSD made at one point a few years back! The Forever Frames are pretty ...more
Marco_Gonzalez wrote:Sweet, Thanks Dude! Most Likely I'll Go With The Marv
yes, go with the marv, i friend of mine bought a forever v2 and it cracked in 6 months in the tt/seat tube junction. He welded it and rode it for another 3-5 months, and he found another crack. he is riding a fit marv now and he likes it.
Posts: 4440
Joined: 4/21/2012
Location: FUCK THIS PLACE, WV USA
My bro has one. I ride it from time to time. I like how solid it feels and how it looks too. It is not american made but the welds are actually quite good. I love the backend, not the 75.5, i feel that is WAY too much steepness. It isnt necessarily that bad, but it is just too much for me. haha
Overall this frame is super solid, i would get one if i didnt like park and trails at all.
References: OneGuyIlluminatiEye, robinson79, Brian Griffin, The Horror Contact, StoreBoughtChild, C_Johnsonbmx, dkTechEthan, etc.
Posts: 1928
Joined: 12/26/2012
Location: GBR
