If you could have a signature frame, what would it be?

Related:
Create New Tag

4/4/2013 8:01 AM

Include all the geo, what company would make it, what youd have tapered, beefy tubing or small tubing, heavy or light, heat treated or not, stickers and all that. id have mine made by Federal probably, Ovalized downtube, 74.5 headtube, 13.4-13.75 chainstays, 13.7 bottom bracket, and toptube sizes from 20" to 21.25, id have it in 21 probably and a 8.375 standover. tough chainstays and tapered seatstays. let me know what you guys would have! mine would be called The Nut and come in Black, Chrome, oldschool matte pink, and Trans Blue.

|

References: OneGuyIlluminatiEye, robinson79, Brian Griffin, The Horror Contact, StoreBoughtChild, C_Johnsonbmx, dkTechEthan, etc.

4/4/2013 8:08 AM
Edited Date/Time: 4/4/2013 8:08 AM

75.5 ht
71 st
21.1" tt
13.1 cs
8.8 standover
11.8 BB

Integrated post
Double gussets
Everything heat-treated
I like it a little on the heavy side
Simple sticker design like Mutiny does
I'd get it built through S&M or FBM probably
Everything should be beefy as fuck (tubing, dropouts)
And it would be either black, trans blue or clear

|

"Are they punkin' me Tio, are they punkin' me?"

4/4/2013 8:13 AM

74.5 - 75 ht
71 st
21 tt
13.6-13.75 cs
low standover with tall build in seat post
not sure on the bb height
wave top and down tube
thick dropouts
wishbone
build in chain tensioners

|

4/4/2013 8:15 AM

I supposed ive got a signature frame lol.. Ive got a Custom FBM.. Specs are...

75.5 Degree Head Tube Angle
20” Top Tube Length
71 Degree Seat Tube Angle
8.25” Stand Over Height
11.5” Bottom Bracket Height
13” Chain Stay Length
2.25” Tyre Clearance
1-1/8” Integrated Head Tube
1-1/4” Top Tube Diameter
3D Laser Cut Top Tube Gusset
1-3/8” Down Tube Diameter
3D Laser Cut Down Tube Gusset
Mid Bottom Bracket
Internally Butted Seat Tube
Round Top Tube
Wrap Around Integrated Seat Clamp
3/4” OD x .035” Gauge Tapered to 1/2” OD Seat Stays
Flat Plate Seat Stay Bridge
3/4” OD x .049” Gauge Tapered to 5/8” OD Chain Stays
Single Bend Chain Stays
Flat Plate Chain Stay Bridge
Capped Stays
Bellwitch / Berzerker 2.5 / Ivy 5 Drop Outs
No Brake Mounts

|

4/4/2013 8:17 AM

Sounds like you got it all planned out ^^

|

"Are they punkin' me Tio, are they punkin' me?"

4/4/2013 8:29 AM

20.5-21.25" TT
74.5 HT
71 ST
13.625-14.25" CS
9" SO
11.875" BB
Toptube and Downtube Gussets
Wishbone
Mid Bottom Bracket
Removable Gyro Tabs
Welded Chainstay Brake Mounts
No Integrated Seat Clamp
Made from Air Hardened Reynolds Tubing.

|

4/4/2013 8:44 AM

20.2, 20.4, 20.6, 20.8, 21, 21.2, 21.4
75 ht
71 st
13.2-13.625(20.2-20.6) 13.5-14.25 cs(20.8-21.4)
8.75 so
11.75 bb
double gussets
wishbone cs
mid bb
ss brakes removeable
angle cut st w/ wedge post
full ht
no butted tubing
extra thick dt, bb, cs for strength

|

I'm on the vital legit list!

4/4/2013 8:59 AM

mine would be legit wink

|

Save a tree

Ride a Bike...... I am an environmentalist jk hahaha



BIKE CHECK: http://www.vitalbmx.com/community/WallmartBMX,103987/setup,83842




WATCH MY NEW EDIT IM SO PROUD OF IT!!

4/4/2013 9:00 AM

WallmartBMX wrote:

mine would be legit wink

Haha this.

|

"Are they punkin' me Tio, are they punkin' me?"

4/4/2013 9:06 AM

TT 21.7"
HT 74.5°
ST 70 °
CS 14.125" - .5"
BB 12.5"
SO 9.25"

OX Platinum top and down tubes
Mid BB
S-bend chainstays
Wide tire clearance
Removable brake hardware
Brake mounts on chainstays
Integrated seat clamp
Heat-treated investment cast dropouts (Warriors/CREAM style)

It's a 22" wheel beast, manufactured in the USA.

|

4/4/2013 9:16 AM

This was done about a month ago wasn't it?

I said basically my current frame. Federal Lacey 2012 Geometry. Love it. 21 inch TT

|

"Hey anybody ever make that mistake like right when you wake up in the morning and you believe in yourself?" -Kyle Kinane

"BIKES!" -Tom Segura

4/4/2013 11:04 AM

Mine would just be a forecaster frame. I love that fucking frame! Photo

|

Smitten In The Mitten





My Whip:


2013 Sunday Funday Aaron Ross Pro "


Ride For:


42North, Run Jelly Pandas, Michigan Local

4/4/2013 11:07 AM

well im orgering a custom standard soon!!
here is what im getting
gonna be based off a juke
13.2 rear end
75.2 ht angle
11.5 bb
21.25 tt
10 inch stand over
chrome
stoked..gonna be rad

|

[LINK TO IMAGE]


follow me on instagram! @neck_brace
also go like my media page on facebook! jiraffe media
also follow jiraffe media on insta! @jiraffe_media

4/4/2013 11:10 AM

mine would be my own signature frame ^.-

|

Jade Bike Check
Refs : ninjacat33 ; SuperstarDk ; ecuadevil ; xbikeascammer ;blizzbikes ; tcbmx ; mattjmuldoon@hotmail ;bmx ; Uoykcuf ; BrokenBmx, the balt; Pavimo; bmx-junkie; Fit.Team.Rider' tito24; trentydoo; brendan.magner.9 ;Scramhype ; Jonathan.Vargas ; jared42069; tomdon ; lifeofridden2200; howlerfbm

4/4/2013 11:12 AM

king_swag wrote:

well im orgering a custom standard soon!!
here is what im getting
gonna be based off a juke
13.2 rear end
75.2 ht angle
11.5 bb
21.25 tt
10 inch stand over
chrome
stoked..gonna be rad

Holy shit that sounds so cool!
Get it as soon as possible!

|

"Are they punkin' me Tio, are they punkin' me?"

4/4/2013 4:44 PM

21 tt
74.6 head tube
71 seat tube
11.8 bb
9 stand over
13.5 chain stays
Welded chain stay brake mounts
Micro wishbone chain stays
Hydro formed down tube gusset
Regular top tube gusset
8 mm dropouts

|

4/4/2013 8:22 PM

Dang! you guys really seem to know what you want in a frame. it seems like a lot of you enjoy the steeper headtube angles. i had a 75 on my subrosa and it never felt quite right, especially on jumps and in the skatepark. haha i honestly really enjoy me federal renegade, its relaxed and not twitchy off jumps at all. haha nice frames guys! real tech and that 22 incher seems gnarly!

|

References: OneGuyIlluminatiEye, robinson79, Brian Griffin, The Horror Contact, StoreBoughtChild, C_Johnsonbmx, dkTechEthan, etc.

4/4/2013 8:54 PM

There was a thread of the exact same thing some time ago. I was super bored at the time and I came up with this haha. Pretty much a regular frame but with graphics hand-drawn by me.
[LINK TO IMAGE]

|

4/5/2013 12:43 AM

Kyle_Marston wrote:

21 tt
74.6 head tube
71 seat tube
11.8 bb
9 stand over
13.5 chain stays
Welded chain stay brake mounts
Micro wishbone chain stays
Hydro formed down tube gusset
Regular top tube gusset
8 mm dropouts

Well that's exactly what I want really.

|

4/6/2013 2:16 PM

20.25" Top Tube Length
75.25° Head Tube Angle
11.6" Bottom Bracket Height
71° Seat Tube Angle
13" Chain Stay Length
9" Stand Over
Beefy Tubing
Heat Treated Everything
Full CrMo
Double Gussets
Made by S&M
No Brake Mounts
Micro Drop Outs
Integrated Seat Clamp
Curved Seat Stay Bridge
Made in USA
8mm Drop Outs
In a nice ass Orange

And bad ass stickers

|

4/8/2013 2:09 PM

brianoob wrote:

There was a thread of the exact same thing some time ago. I was super bored at the time and I came up with this haha. Pretty much a regular frame but with graphics hand-drawn by me.
[LINK TO IMAGE]

If you're ever bored again, would you make me something like that?

|