Kmc Z410 problem..

Related:
Create New Tag

1/27/2014 7:15 PM

We'll I'm trying to put it on and I did and now where I put it on it won't fucking turn or whatever.. It's stuck on way..
Photo

|

Bang Bang bmx

1/27/2014 7:18 PM

whenever a link of mine gets stiff I just jam a small screwdriver into the larger holes (the outer plate links), hold onto the rest of the chain, and use the screwdriver to kinda bend against the inside of those links and it wiggles the plates loose from the pins. if that makes sense..

keep it lubed up too

|

1/27/2014 7:27 PM

lube is key
wiggle it back and forth (side to side) and that should loosen it up

|

refs: hookjrclc, hardbmxtim, hatchmoses for sale and trade, kymike for sale and trade, blizzbikes for trade, and some other dude i cant remember his username, vrsapat956, colonydirt94, mario.villegas90, wolfen
Camera Setup: Panasonic HMC150, Panasonic GH2, Canon FTBn, Yashica Lynx 5000e, Canon 28mm f/2.8, Canon 50mm f1.4, Rokinon 7.5mm f/3.5

1/27/2014 7:38 PM

I gave up.. I'm going to the bike shop tom and getting it put on.

|

Bang Bang bmx

1/27/2014 7:49 PM
Edited Date/Time: 1/27/2014 7:59 PM

I don't really know about chains, but in the picture, are you able to connect a master link to a link with outer plates? I thought it is supposed to be connected to a link with inner plates.

|

1/27/2014 7:58 PM

Wait.. are you trying to put the master link on wrong ?

|

1/27/2014 9:26 PM

sundaybmxRR wrote:

Wait.. are you trying to put the master link on wrong ?

I have no clue..

|

Bang Bang bmx

1/27/2014 9:33 PM

ThugLifeBmxRiderz wrote:

I have no clue..

it looks to me that you are, I guess I missed that when I first looked at it. you should be putting the master link through the inner piece link, this one

[LINK TO IMAGE]

|