MacNeil Swagger Non-Drive Side Hub Guard?

Related:
Create New Tag

9/19/2013 11:16 AM

Does anybody know of a hub guard that will work with the MacNeil Swagger hub (not the G-Sport GLAND, I am already using that)? I already e-mailed MacNeil and am awaiting there response.

The GLAND works great, but if I grind a perfectly square edged ledge the zip ties will usually snap off from impact. Rounded off rails or edges are not a problem.

This is my exact hub, mine is LHD.
[LINK TO IMAGE]

Thanks,
Grizz

|

I have 75 cool points and 5 awesome points

Buy/Sell Refs: Showtime402, fsearles, ticaleb, howlerfbm (x2), irideafly, the balt (x2), MrHavoc1988. dprc

9/19/2013 11:17 AM

thats a bad ass lookin hub

|

9/19/2013 11:25 AM

BRANDON_90 wrote:

thats a bad ass lookin hub

Thanks, I hand crafted it myself.

|

I have 75 cool points and 5 awesome points

Buy/Sell Refs: Showtime402, fsearles, ticaleb, howlerfbm (x2), irideafly, the balt (x2), MrHavoc1988. dprc

9/19/2013 11:34 AM

BRANDON_90 wrote:

thats a bad ass lookin hub

motogrizz wrote:

Thanks, I hand crafted it myself.

Should've used rhinocerous skin...
Wouldn't need a guard then.
Tried DG's yet?

|

HardBMX_Tim wrote: I welded a peg to my pedal so I could do pedal grinds. I would rather wear a teletubbies speedo than a shirt with the word "Bitches" on it, or even worse, "Swag".

9/19/2013 11:41 AM

BRANDON_90 wrote:

thats a bad ass lookin hub

motogrizz wrote:

Thanks, I hand crafted it myself.

? yeh?

|

9/19/2013 11:43 AM

universal aluminium hub guards all the way

|

don't overthink it just do it !

9/19/2013 12:06 PM

Animal PYN should work. It comes with different sized spacers so its universal to most hubs.

|




Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx


9/19/2013 12:06 PM

Animal PYN should work. It comes with different sized spacers so its universal to most hubs.

|




Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx


9/19/2013 3:33 PM

BRANDON_90 wrote:

thats a bad ass lookin hub

motogrizz wrote:

Thanks, I hand crafted it myself.

BRANDON_90 wrote:

? yeh?

[LINK TO IMAGE]
|

I have 75 cool points and 5 awesome points

Buy/Sell Refs: Showtime402, fsearles, ticaleb, howlerfbm (x2), irideafly, the balt (x2), MrHavoc1988. dprc

9/19/2013 3:34 PM

WhipTheFlow wrote:

universal aluminium hub guards all the way

Example plssss. I might try to make one myself.

|

I have 75 cool points and 5 awesome points

Buy/Sell Refs: Showtime402, fsearles, ticaleb, howlerfbm (x2), irideafly, the balt (x2), MrHavoc1988. dprc

9/19/2013 3:34 PM

HardBMX_Tim wrote:

Animal PYN should work. It comes with different sized spacers so its universal to most hubs.

Thanks for the info!

|

I have 75 cool points and 5 awesome points

Buy/Sell Refs: Showtime402, fsearles, ticaleb, howlerfbm (x2), irideafly, the balt (x2), MrHavoc1988. dprc

9/19/2013 4:28 PM
Edited Date/Time: 9/19/2013 4:29 PM

Salt plus also makes one that replaces the existing cone nut with a thinner nut (aka drive side nut) and spacers to shim it to where it fits.
Others such as FBM universal should work but maybe snug in the frame. Im told the Demolition guard for the Rogue and Rolls cassettes fit as well but I have never bothered to try mine since I dont ride my swagger cassette much anymore.
You can also use the universal shadow guard which is thicker so it wont punch the center out like the thinner ones tend to. Just replace the cone nut with a drive side one from a similar hub (odyssey v3 or any joytech built cassette) and shim with shims or wheel nut washers if necessary.
Hope that helps give more options.

|

9/19/2013 5:13 PM

In all seriousness, use the shoelace.

The zipties snap easily. A buddy used the provided shoelace on his 1st iteration Gland, and it is STILL on without issue.

|

"Hey anybody ever make that mistake like right when you wake up in the morning and you believe in yourself?" -Kyle Kinane

"BIKES!" -Tom Segura

7/29/2014 12:08 AM

any one know where or what driver will work on this i need a 9t

|

7/29/2014 12:10 AM

huntsforbunz wrote:

any one know where or what driver will work on this i need a 9t

probably a joytech clone just guessing
so probably the joytech driver from dans? might work idk if it will

|

refs: hookjrclc, hardbmxtim, hatchmoses for sale and trade, kymike for sale and trade, blizzbikes for trade, and some other dude i cant remember his username, vrsapat956, colonydirt94, mario.villegas90, wolfen
Camera Setup: Panasonic HMC150, Panasonic GH2, Canon FTBn, Yashica Lynx 5000e, Canon 28mm f/2.8, Canon 50mm f1.4, Rokinon 7.5mm f/3.5

7/29/2014 12:25 AM

bmxsteve99 wrote:

probably a joytech clone just guessing
so probably the joytech driver from dans? might work idk if it will

this.

I'm fairly positive it's just a Joytech clone, so any driver that fits an Odyssey Hazard hub should fit it. The Odyssey or Blackout driver on Danscomp are good bets.

|

7/29/2014 12:32 AM

huntsforbunz wrote:

any one know where or what driver will work on this i need a 9t

bmxsteve99 wrote:

probably a joytech clone just guessing
so probably the joytech driver from dans? might work idk if it will

sundaybmxRR wrote:

this.

I'm fairly positive it's just a Joytech clone, so any driver that fits an Odyssey Hazard hub should fit it. The Odyssey or Blackout driver on Danscomp are good bets.

well its a 4 paw is the blackout a 4 or 3? will that matter if its a 3 when it was a 4?

|

7/29/2014 12:34 AM

do you still have the original driver? pic of driver and internals would be nice

|

refs: hookjrclc, hardbmxtim, hatchmoses for sale and trade, kymike for sale and trade, blizzbikes for trade, and some other dude i cant remember his username, vrsapat956, colonydirt94, mario.villegas90, wolfen
Camera Setup: Panasonic HMC150, Panasonic GH2, Canon FTBn, Yashica Lynx 5000e, Canon 28mm f/2.8, Canon 50mm f1.4, Rokinon 7.5mm f/3.5

7/29/2014 12:35 AM

|

refs: hookjrclc, hardbmxtim, hatchmoses for sale and trade, kymike for sale and trade, blizzbikes for trade, and some other dude i cant remember his username, vrsapat956, colonydirt94, mario.villegas90, wolfen
Camera Setup: Panasonic HMC150, Panasonic GH2, Canon FTBn, Yashica Lynx 5000e, Canon 28mm f/2.8, Canon 50mm f1.4, Rokinon 7.5mm f/3.5

7/29/2014 12:36 AM

im getting this hub but its got a 11t and its good conditionand cheap and i need sealed really bad and i just want to know if i can get a 9 tooth driver for it

|

7/29/2014 12:39 AM

huntsforbunz wrote:

im getting this hub but its got a 11t and its good conditionand cheap and i need sealed really bad and i just want to know if i can get a 9 tooth driver for it

wait is it unsealed?
just get a 30t and you will get less chain wear and the same as a 25/9t setup
http://www.danscomp.com/products-PARTS/458228/Sunday_Sabretooth_Sprocket.html 30$

|

refs: hookjrclc, hardbmxtim, hatchmoses for sale and trade, kymike for sale and trade, blizzbikes for trade, and some other dude i cant remember his username, vrsapat956, colonydirt94, mario.villegas90, wolfen
Camera Setup: Panasonic HMC150, Panasonic GH2, Canon FTBn, Yashica Lynx 5000e, Canon 28mm f/2.8, Canon 50mm f1.4, Rokinon 7.5mm f/3.5

7/29/2014 12:41 AM

Blackout driver is 4 pawl I'm pretty sure

|

7/29/2014 12:41 AM

no the wheel i have is unsealed i want this macneil hub and i love 25/9 so i need a driver that works for it

|

7/29/2014 10:05 AM

huntsforbunz wrote:

no the wheel i have is unsealed i want this macneil hub and i love 25/9 so i need a driver that works for it

30-11 feels the exact same

|

refs: hookjrclc, hardbmxtim, hatchmoses for sale and trade, kymike for sale and trade, blizzbikes for trade, and some other dude i cant remember his username, vrsapat956, colonydirt94, mario.villegas90, wolfen
Camera Setup: Panasonic HMC150, Panasonic GH2, Canon FTBn, Yashica Lynx 5000e, Canon 28mm f/2.8, Canon 50mm f1.4, Rokinon 7.5mm f/3.5

7/29/2014 12:37 PM

huntsforbunz wrote:

no the wheel i have is unsealed i want this macneil hub and i love 25/9 so i need a driver that works for it

bmxsteve99 wrote:

30-11 feels the exact same

but its a long story my cranks dont come off easy and i dont have any more chain so id have to buy a new chain, sprocket and fight my cranks thats about $55 while the 9t is $45 ill buy the driver and make this 100% easier

|