Mission Parts

Related:
Create New Tag

2/25/2020 8:48 AM

So I was checking out the website and wow they hubs the rims the forks are affordable and I was wondering are they worth it? Will they hold up to a beginner?

|

2/25/2020 8:53 AM

It's what Kink puts on their bikes. I would think YES but I don't have a Kink. I think plenty of people riding MIssion stuff though. There are different levels of stuff though. What specific parts are you talking? Maybe link them and it will help people better to know if they're decent or not.

|

Philippians 1:6 And I am sure of this, that he who began a good work in you will bring it to completion at the day of Christ Jesus. Insta: SilentNightSun

2/25/2020 8:56 AM
Edited Date/Time: 2/25/2020 8:57 AM

If you're still learning and not sending huge gaps or completely abusing your bike, you'll be alright. Majority of their stuff is up-to-par with products that fall into the same price range. Kink used them on their completes heavily some years ago.

|

Scooter kid trying to ride BMX.
Instagram: @scootereyn

2/25/2020 9:05 AM

Mission makes some pretty good stuff for their price points! They offer sealed female wheels for the price of most hubs alone, and lots of other goods.

If you're on a budget, go for it!

We have some Mission components in stock and online at WWW.POWERSBIKESHOP.COM 🙌

|

Powers Bike Shop

100% BMX-Only Shop & Mail-Order in Richmond, Virginia

Check us out on social media! @powersbikeshop

2/25/2020 9:21 AM

Mission has some decent parts for cheap. I love the mission brakes and lever. I had a mission front hub that was ok. It held up but wasn’t the smoothest rolling hub out there so I replaced it with a vandero pro. The bars and forks are good for a beginner, but if you ride hard you WILL bend them.

|

2/25/2020 9:45 AM

I agree with the above, for the money (and in some cases regardless of money) they have some nice parts.

I bought a intrepid rear cassette wheel of there's in 2015 and its now gone through 4 full years of frequent use for 3 different people and is still straight and spinning well.

|

2/25/2020 11:35 AM

I really like the mission parts I have run in the past, female rear cassette complete wheel, still going with zero maintanence from a couple years ago. Have some u brakes that are still being used from 3 years ago. Had a lever that I dont know what happened to but im sure its still operational. Never bought any skeltal parts but Im sure they are decent.

|

2/26/2020 9:00 AM

They make the best front hubguards I have ever ran and I've had S&M and daily grinds.

|

I believe in hub guard protection

2/26/2020 12:03 PM

I had a kink complete and even when I started putting together a custom...I continue to use mission parts as upgrades from the complete

I've never had a problem with any of their products...I would take mission parts over anything from companies like rant that usually also fall into that budget category

|

2/26/2020 6:46 PM

recently put a mission hollow axle and mission 8t driver into a bonedeth hub and it works well. Driver has bushings and axle is shorter, so its a decent upgrade.(kinks website actually has the exact same axle)
my first time using mission products so i cant say much yet.

but i did have to modify the driver to fit into the hub... fun stuff.

|

FREE not under the control or in the power of another; able to act or be done as one wishes
STYLE a particular, distinctive, or characteristic mode of action or manner of acting

2/27/2020 5:17 AM

BMXism wrote:

recently put a mission hollow axle and mission 8t driver into a bonedeth hub and it works well. Driver has bushings and axle is shorter, so its a decent upgrade.(kinks website actually has the exact same axle)
my first time using mission products so i cant say much yet.

but i did have to modify the driver to fit into the hub... fun stuff.

So a 9t hub can be converted into a 8t hub and it will still be able to be used by the same drive train?

|

2/27/2020 9:01 AM
Edited Date/Time: 2/27/2020 9:04 AM

well yeah, if its compatible..

was going to get bigger sprocket, but short chainstay+huge tire clearance make it hard to keep a smooth drive. Even the 25t barely fits.

Everything measures exactly as the stock bonedeth. Although the mission lock nut is reverse threaded.. i swapped that for odyssey of equal size.

kinda started as a gamble. Wasn't 100% sure anything would fit. First attempt was with an odyssey driver. Works and super silent, but I shaved it down a little too much. Really wanted to try 8t, so second attempt came out perfect.

dont buy stuff without confidence or at least be prepared to work past obstacles.

|

FREE not under the control or in the power of another; able to act or be done as one wishes
STYLE a particular, distinctive, or characteristic mode of action or manner of acting

2/27/2020 10:04 AM

BMXism wrote:

recently put a mission hollow axle and mission 8t driver into a bonedeth hub and it works well. Driver has bushings and axle is shorter, so its a decent upgrade.(kinks website actually has the exact same axle)
my first time using mission products so i cant say much yet.

but i did have to modify the driver to fit into the hub... fun stuff.

Good to know when my internals on my pornhub explodes I can use replacement parts

|