Mission process 48spline help

Related:
Create New Tag

3/19/2014 12:56 PM

So got it all aligned and greased up but I go to tighten the crank on and it's really hard to turn the bolt to push it on the spindle I don't know what to do

|

3/19/2014 1:36 PM

Maybe the inside of the spindle has something that block it

|

RIDE OR DIE



THE ROUTER

Instagram: Luislorentebmx

3/19/2014 1:49 PM

There brand new they tighten but I'm scared to snap the bolt they don't push on it off and there greased to living hell

|

3/19/2014 2:03 PM

Take it off and grease even more

|

RIDE OR DIE



THE ROUTER

Instagram: Luislorentebmx

3/19/2014 2:07 PM

They don't go on or off do you not read?

|

3/19/2014 2:20 PM

So they're new? Use the tool that comes with them & crank that fucker on

|

3/19/2014 2:21 PM

It didn't come with a crank tool and I just rounded the fucking bolt, my luck

|

3/19/2014 4:34 PM

My friend recently got these and they were impossible to get on. If I were you, I would put them in a vice with a piece of wood on each side and basically tighten them together. I used a piece of wood and a hammer to get my friends on and it took about an hour. These cranks were definitely the worst ive ever dealt with out of Profiles, Animals, and Fits. Goodluck.

|




Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx