?NORMAL?

Related:
Create New Tag

5/23/2009 8:46 AM

Is it normal for your sprocket and back hub driver to not be perfectly alingned?

|

WILBERT HERNANDEZ...

5/23/2009 9:10 AM

Will anybody help me???

|

WILBERT HERNANDEZ...

5/23/2009 9:11 AM

um idk but i think thats not right

|

massholes 4 lyfe!
bstick
legendsx23

5/23/2009 9:21 AM

If your sprocket and driver aren't alingned by lets say 2mm,is it supposed to make a big cranking noise even though the sprocket and driver aren't bent?

|

WILBERT HERNANDEZ...

5/23/2009 9:24 AM

your spacers on your cranks..........you have either too many or not enough....depending on which way the alignment is off.

|

I'll beat the %@#kin brakes off you @%tch. Shut the %#!k up and ride your %*#kin bike @$$hole.

5/23/2009 9:27 AM

spinningbars wrote:

your spacers on your cranks..........you have either too many or not enough....depending on which way the alignment is off.

What if you cant take anymore spacers off your cranks or cant put anymore on?

|

WILBERT HERNANDEZ...

5/23/2009 10:20 AM

wilbertice10 wrote:

What if you cant take anymore spacers off your cranks or cant put anymore on?

|

WILBERT HERNANDEZ...

5/23/2009 10:23 AM

um then take it to a bike i shop i would say?
i have had that problem just because my bike was a piece.
If you keep running it like that it will eat your sprocket and break teeth then blow out your driveer because its putting so much pressure on the bearings

|

refs: Spikez5, cokacola, dacumup213 (x2), josh estey, Blake El Gingero, naters14, Harry95, pcoco, hattrckhcky, bstick, kevinl, Sunday.bmx21, dgisback, iridebmxeveryday, I RIDE

5/23/2009 11:17 AM

What if your sprocket and driver were not alinged by just 1 or 2 mm?Would it make a clicking noise?

|

WILBERT HERNANDEZ...

5/23/2009 1:03 PM

wilbertice10 wrote:

What if your sprocket and driver were not alinged by just 1 or 2 mm?Would it make a clicking noise?

|

WILBERT HERNANDEZ...

5/23/2009 1:20 PM

wilbertice10 wrote:

What if your sprocket and driver were not alinged by just 1 or 2 mm?Would it make a clicking noise?

|

WILBERT HERNANDEZ...

5/23/2009 1:33 PM

PS-SUNDAY-COLOR IS G-A-Y/A F-A-G-G-O-T

|

WILBERT HERNANDEZ...

5/23/2009 2:24 PM

wilbertice10 wrote:

What if your sprocket and driver were not alinged by just 1 or 2 mm?Would it make a clicking noise?

|

WILBERT HERNANDEZ...

5/23/2009 2:24 PM

wilbertice10 wrote:

What if your sprocket and driver were not alinged by just 1 or 2 mm?Would it make a clicking noise?

|

WILBERT HERNANDEZ...

5/23/2009 2:28 PM

too many what if's...

|

Boxman for President

5/23/2009 2:30 PM

I ride fit wrote:

too many what if's...

IF my sprocket and driver were not alinged by 1 or 2mm and the driver and sprocket weren't bent,would it make a "click" noise?

|

WILBERT HERNANDEZ...

5/23/2009 2:31 PM

fail

|

say yeahh.

5/23/2009 2:32 PM

azbmx12 wrote:

fail

YOU FAIL FOR WRITTING FAIL HERE

|

WILBERT HERNANDEZ...

5/23/2009 2:34 PM

you fail for tellin me i fail for writing fail

|

say yeahh.

5/23/2009 2:35 PM

azbmx12 wrote:

you fail for tellin me i fail for writing fail

Just try to help me will ya?

|

WILBERT HERNANDEZ...

5/23/2009 2:49 PM

no it should be alligned

|

5/23/2009 2:51 PM

SundaybikesRDR wrote:

no it should be alligned

But will the chain make a clicking noise and skip even if the sprocket and driver arent bent?

|

WILBERT HERNANDEZ...

5/23/2009 2:59 PM

wilbertice10 wrote:

But will the chain make a clicking noise and skip even if the sprocket and driver arent bent?

yes, it still will.
because its putting alot of pressure on your driver and its bendin the chain so just put in/take out some spcers until its aligned

|

say yeahh.