Need help designing a pump track

Related:
Create New Tag

7/1/2014 6:59 PM
Edited Date/Time: 7/1/2014 7:42 PM

Im above average at building trails but I'm not to sure about a track. The areas is roughly 40'x25' wide. The main reason I'm unsure is that it has a slight downhill slant. I can have a run up next to my house so the section can start next to my house. Any ideas and or drawings would be sweet. Thanks guys!Photo

Photo

|

Da Laird

unfuckwithable ill

Refs-brokenbmx, MaximusBikes, Brian_Griffin, Colonydirt94, Aebasher



7/1/2014 7:09 PM

[LINK TO IMAGE] something like this is good
|

"Let it be heard: FOUR IS BACK MUH FUCKAZ"
Refs: Mobking, four, tomdon, Sickdude, xxOhioanxx onetrykid Krisner BMX
FBM Pizza Beer Roast Machine

7/1/2014 7:15 PM

I had that idea but was trying to be more creative. That will be the best bang for the buck though. I'm just worried about the up hill way

|

Da Laird

unfuckwithable ill

Refs-brokenbmx, MaximusBikes, Brian_Griffin, Colonydirt94, Aebasher



7/1/2014 7:18 PM

if you can pump then going up would be no problem. plus it doesnt seem very uphill anyway.

|

7/1/2014 7:19 PM

Make something that looks like a figure 8 or a 4 leaf clover.

Infinite pumping action until your arms fall off.
The uphill is going to kill the momentum though.

|

In real life, i'm a short Perverted Azn Man.
But in the internet, i'm a killing machine with 10 years MMA training experience.

( ͡° ͜ʖ ͡°)
.
.
.
(͡O╭͜ʖ╮͡O)

7/1/2014 7:21 PM

Photo

|

Da Laird

unfuckwithable ill

Refs-brokenbmx, MaximusBikes, Brian_Griffin, Colonydirt94, Aebasher



7/1/2014 7:23 PM

KrisnerBMX wrote:

if you can pump then going up would be no problem. plus it doesnt seem very uphill anyway.

Agreed but will take the fun out of it haha

|

Da Laird

unfuckwithable ill

Refs-brokenbmx, MaximusBikes, Brian_Griffin, Colonydirt94, Aebasher



7/1/2014 8:43 PM

make it in a shape that you start out at the top.. go around the bottom and then slightly up the hill.. then back down to a large berm back up the hill then back down. to where you never go up the hill more then 5 - 10 feet. so it never really takes extra energy because the track goes back down the h.....

fuck it ill just draw a picture.

|

7/1/2014 8:47 PM

KrisnerBMX wrote:

make it in a shape that you start out at the top.. go around the bottom and then slightly up the hill.. then back down to a large berm back up the hill then back down. to where you never go up the hill more then 5 - 10 feet. so it never really takes extra energy because the track goes back down the h.....

fuck it ill just draw a picture.

thPhoto

this is what i mean. all the loop backs are berms. and then sprinkle rollers and jumps in to make it fit.

|

7/1/2014 8:51 PM

Eh, you'd always be going up hill after the first two long lines and that would suuuuuuuuuuuuuck

|

Da Laird

unfuckwithable ill

Refs-brokenbmx, MaximusBikes, Brian_Griffin, Colonydirt94, Aebasher



7/2/2014 9:41 AM

Build a loop somewhere in their that will get your pump dialed

|

7/2/2014 11:14 AM

eskimojay wrote:

Build a loop somewhere in their that will get your pump dialed

Haha

|

Da Laird

unfuckwithable ill

Refs-brokenbmx, MaximusBikes, Brian_Griffin, Colonydirt94, Aebasher



7/2/2014 11:34 AM

How about when you start uphill ypu dig it level for only a couple feet wide and at the end of the level it has a transfer to the down. I'll draw up a thing later.

|

7/2/2014 7:05 PM

get dat rail goin boi dat would be swaggin on dirt ya dig!

|

sup fellus ya dig!?

I'm back boii