Personal Preference

Related:
Create New Tag

8/16/2013 1:38 AM

Font Load or Top Load?
Bar Hight and Width?
Tire Psi and Size?
Fork Offset?
Slammed wheel or not?
How many pegs?
How high do you run your seat?
Your Favourite frame specs?
Loud Hub or Quite Hub?
Seat type? Capital, Plastic, ect....
Bar Ends plastic or metal?
How many Headset spacers?
Favourite lacing Pattern?
Female or Male axles?
Crank Length?
Sliders or Half caps?
Half Link or Full Link?
Spline Drive or Bolt Drive?
Is it easier for you to do tricks at slow speeds or fast speeds?
Nike or Vans?
White wall or Tan wall?
Slick Tires or Grippy Tires?
I don't think I forgot anything, but If I did just ask it in the comments or whatever they are....

|

Bang Bang bmx

8/16/2013 1:53 AM

Font Load or Top Load? Front
Bar Hight and Width? At least 8", no taller than 8.75", no wider than 27" but no shorter than 26"
Tire Psi and Size? 2.25" front/2.10" rear, low pressure.. like 50PSI. Easier on my wrists when landing hard
Fork Offset? Doesn't matter to me really. Currently have 32mm offset
Slammed wheel or not? Again doesn't matter to me at all
How many pegs? 2, occasionally 3 or 4
How high do you run your seat? like 10mm away from being slammed
Your Favorite frame specs? 20.5" TT, Mid BB, integrated HT, heat treated.. Other than that doesn't really matter geometry-wise
Loud Hub or Quite Hub? Not dead silent, other than that I don't care
Seat type? Capital, Plastic, ect.... Slim!
Bar Ends plastic or metal? PC, Odyssey Par ends ftw!
How many Headset spacers? None, flush look
Favourite lacing Pattern? 36h/3x, inbound in the front on the grind side though always
Female or Male axles? female in the front, male in the read. No homo.
Crank Length? 175mm
Sliders or Half cabs? slider unless I'm going off of something
Half Link or Full Link? Full
Spline Drive or Bolt Drive? bolt honestly.
Is it easier for you to do tricks at slow speeds or fast speeds? Depends what. Barspins are easier for me going slower but 360s are easier going faster
Nike or Vans? Neither
White wall or Tan wall? Neither, if I had to pick though, white wall
Slick Tires or Grippy Tires? grippy

|

8/16/2013 1:59 AM

Topload, currently have a Frontload though
8.5-9" Rise and 28.5-29" Wide, currently have 8.25x28
Front: 70 PSI, 2.1" Rear: 80 PSI, 1.85" (Currently have 1.95 on the Back)
25-28mm, currently have more though
Not slammed.
4 normally, but atm I have 2 on the back and 1 on the front and it might stay like that.
9" Standover with 5" of Post showing.
21" TT, 13.5" CS, 11.875" BB, 9" SO, 75 HT, 71 ST
Don't care.
Slim/Mid Railed or Tripod, I have a Slim/mid Railed at the moment (Odyssey Aitken).
Plastic Bar ends
2 at the moment.
36h Cross laced
Female axles, have male at the moment though.
175mm
I love doing both.
Full Link for sure.
Don't really mind to be honest
I normally find it easier to stuff slow, but prefer to them fast.
Vans, I really don't like Nikes,
Tan probably,
In between, I don't want dirt tyres but I wan't a fair bit of grip.

|

8/16/2013 2:21 AM

Front Load or Top Load? - Currently FL but dgaf really. Both can look/feel good.
Bar Hight and Width? - My bars now (Lago 2) are 8.5" x 29" and I really love the feel of them but I have been eyeing up the S&M Credence bars for a while
Tire Psi and Size? - At least 70. 2.2 is good for me
Fork Offset? - Mine are 35 mm I think and that feels pretty sweet
Slammed wheel or not? - More worried about getting the chain tightness right
How many pegs? - None
How high do you run your seat? - Slammed. Fight me.
Your Favourite frame specs? - 74.5 Ht (maybe 74 but never ridden one so idk) 14"ish stays, medium standover, long tt (at least 21)
Loud Hub or Quite Hub? - dgaf how loud really but I do quite like the sound of mine (super metallic hollow noise that I've never heard any other hub make)
Seat type? Capital, Plastic, ect.... - Running a pivotal but Raileds are so much more rad
Bar Ends plastic or metal? - I like my parends but I don't really care, it's just most metal barends look lame af
How many Headset spacers? - none
Favourite lacing Pattern? - Who gives a fuck?
Female or Male axles? - Female. So much cleaner looking
Crank Length? - Never ridden anything but 175mm but I want to try longer.
Sliders or Half cabs? - Both are pretty fun but I enjoy doing half cabs more.
Half Link or Full Link? - Full Link
Spline Drive or Bolt Drive? - Spline drive is pretty sweet but I don't really care
Is it easier for you to do tricks at slow speeds or fast speeds? - Depends on the trick really but doing tricks at a faster speed is more rad and therefore more fun
Nike or Vans? - Vans
White wall or Tan wall? - Generally tan walls but Chase Hawk's latest bike does look pretty slick
Slick Tires or Grippy Tires? - Grippy? What kind of question is this even? The only reason you'd want a slick is for the front to make sliders easier or to do that Tate Roskelley trick or to make brakeless skids easier in which case you should just get a brake ahahaha

|

My Old* Steed


Click here and follow me :D
Twitterrr

8/16/2013 3:13 AM

Font Load or Top Load? front
Bar Hight and Width? 8.1 rise and 27 wide
Tire Psi and Size? 2.25 front and 2.1 rear, 110 psi in both
Fork Offset? 32mm
Slammed wheel or not? slammed
How many pegs? 2
How high do you run your seat? slammed
Your Favourite frame specs? 20.7tt 69sa 13.2 rearend, 11.6 bb 8.2 standover 74.5 ha
Loud Hub or Quite Hub? very loud
Seat type? Capital, Plastic, ect.... slim
Bar Ends plastic or metal? plastic
How many Headset spacers? none
Favourite lacing Pattern? 3 cross
Female or Male axles? female
Crank Length? 170
Sliders or Half caps? half cab
Half Link or Full Link? half link
Spline Drive or Bolt Drive? spline
Is it easier for you to do tricks at slow speeds or fast speeds? slow but fast is more fun
Nike or Vans? vans
White wall or Tan wall? tan
Slick Tires or Grippy Tires? grippy front slick rear

|

8/16/2013 3:21 AM
Edited Date/Time: 8/16/2013 8:14 PM

Font Load or Top Load? Right now, front load. I'll be switching to topload when my animal big four comes. smile
Bar Hight and Width? 8.55 x 28, my next bar is 8.25 x 28-27
Tire Psi and Size? 65 psi 2.25 front x 70 ps 2.15 rear
Fork Offset? 32mm
Slammed wheel or not? nope
How many pegs? 3
How high do you run your seat? 2 inches of seat post
Your Favourite frame specs? heat treated...
Loud Hub or Quite Hub? i have a quiet hub. doesn't matter
Seat type? Capital, Plastic, ect.... Fat and fluffy pivotal.
Bar Ends plastic or metal? Metal Alloy
How many Headset spacers? 5, 2, and 7mm... 3 total
Favourite lacing Pattern? 3x
Female or Male axles? female
Crank Length? 175
Sliders or Half caps? sliders all day for extra steez
Half Link or Full Link? full link
Spline Drive or Bolt Drive? bolt drive
Is it easier for you to do tricks at slow speeds or fast speeds? i can 180 better at fast speeds and grinds at slow as fuck speeds, depends on the trick.
Nike or Vans? Nike
White wall or Tan wall? black wall
Slick Tires or Grippy Tires? grippy
|

In real life, i'm a short Perverted Azn Man.
But in the internet, i'm a killing machine with 10 years MMA training experience.

( ͡° ͜ʖ ͡°)
.
.
.
(͡O╭͜ʖ╮͡O)

8/16/2013 4:03 AM

Font Load or Top Load? S&M Challenger
Bar Hight and Width? 8.69 x 29
Tire Psi and Size? 2.25 at 60 psi
Fork Offset? 25?
Slammed wheel or not? Only if the chain is at the right tension
How many pegs? 0 or 4
How high do you run your seat? few inches
Your Favourite frame specs? 75HT 21TT 11.69BB 70ST 13.65CS
Loud Hub or Quiet Hub? dont care
Seat type? Capital, Plastic, ect.... Anything but plastic or that fucking total brit seat
Bar Ends plastic or metal? Either
How many Headset spacers? None
Favourite lacing Pattern? 4x
Female or Male axles? Female front, male rear
Crank Length? 175
Sliders or Half cabs? Sliders
Half Link or Full Link? Full
Spline Drive or Bolt Drive? Bolt
Is it easier for you to do tricks at slow speeds or fast speeds? Speed makes everything better
Nike or Vans? Fuck that poser nike shit
White wall or Tan wall? Black, white out of those though
Slick Tires or Grippy Tires? Grippy, but if a slick back never hurts

|

I do stuff and I'm not good at it.
I got refs

8/16/2013 4:19 AM

Font Load or Top Load? Top
Bar Hight and Width? 9x28
Tire Psi and Size? 2.2 @ 65-70
Fork Offset? dunno lol
Slammed wheel or not? nope
How many pegs? 2
How high do you run your seat? 2 fingers showing
Your Favourite frame specs? 75HT 21TT 11.5BB 13.5CS
Loud Hub or Quite Hub? Qiet
Seat type? Capital, Plastic, ect.... anything but plastic
Bar Ends plastic or metal? plastic but my current grips don't allow bar ends
How many Headset spacers? 4
Favourite lacing Pattern? 4x
Female or Male axles? female front and rear
Crank Length? 170
Sliders or Half caps? Sliders
Half Link or Full Link? Half
Spline Drive or Bolt Drive? Bolt
Is it easier for you to do tricks at slow speeds or fast speeds? Slow
Nike or Vans? Vans
White wall or Tan wall? Tan
Slick Tires or Grippy Tires? Grippy

|

Bruh

8/16/2013 4:44 AM
Edited Date/Time: 8/16/2013 5:14 AM

Either depending on bar height

between 8.2 and 9.2.

edit: my xbox f-ed up. plz ignore

|

Refs:
Bought from: Tito24, tinybikerider33 (x2), RideBikesYoo, hookjrclc, MrHavoc1988, ScramHype, BigOleMonster
Sold to: Jared42069 (x2), Sancheezz, blueep3piece, Marco_Gonzalez, Riverside Rider, HardBMX_Tim
Traded: tomdon
Hooked me up: zachhendrix, oscar7588

Personal Email: snmloverbmx@hotmail.com
n-dür product info/ order email: ndur_bmx@outlook.com
n-dür on facebook

8/16/2013 5:05 AM

Font Load or Top Load? Running FL currently but both can look good
Bar Hight and Width? 8.85x28.5
Tire Psi and Size? 50 PSI 2.25/2.20
Fork Offset?32
Slammed wheel or not? Not
How many pegs? 2
How high do you run your seat? 4 fingers i think
Your Favourite frame specs? 21TT 75HT 13.7CS 8.75-9" SO
Loud Hub or Quite Hub? Don't care as long as it holds up
Seat type? Capital, Plastic, ect.... Fat
Bar Ends plastic or metal? Par Ends
How many Headset spacers? Two 7mm
Favourite lacing Pattern? 3x i guess
Female or Male axles? Female front/male rear
Crank Length?165mm
Sliders or Half cabs? Half cabs mostly
Half Link or Full Link? Full
Spline Drive or Bolt Drive? Spline
Is it easier for you to do tricks at slow speeds or fast speeds? Regular speed i guess haha
Nike or Vans? Vans
White wall or Tan wall? Black
Slick Tires or Grippy Tires? Grippy
I don't think I forgot anything, but If I did just ask it in the comments or whatever they are....

|

8/16/2013 5:25 AM
Edited Date/Time: 8/16/2013 5:30 AM

I rode a Front Load for an eternity, messing around with Top Loads now.
As you all know, I was dead against anything over 8.5" x 28" Width. New Bars will be 10" x 29" haha.
NEVER over 75psi Front or Back! I have been running 2.25" most recently, Going for 2.35" Tyres on the new Bike.
Not hugely bothered by offset., I've had Zero, Minimal, Inbetween & Regular. I'm probably going to stick around 30-33mm
Depends on the Frame, The Majority of the time Yes. But with the new Frame i want longer CS's so no.
4, I used 2 for a long, long time. But i love the possibilities with 4! Also It opens the door for Flatland stuff!
At the very least 3 fingers, If i am riding Flatland then a couple of Fists. Usually somewhere in-between that.
I cannot really comment on this one, I have tried so many different specs & i am yet to find a Frame i am 100% happy with.
Prefer a quieter Hub if i'm being honest. I've ran Freecoasters in the past & will be getting another one soon! So Silent!
Usually Fat, But i have a Tree Ergo Fat, which is a weird shape & an Eclat OZ Thick which is a shape all to itself!
Plastic Bar Ends.
As little as possible.
I'm pretty boring when it comes to lacing. 3x is fine for me.
Female without a single doubt!! The Eclat Blind Freecoaster will only be coming Male so meh :/
165mm/170mm, depends on the Frame i guess. Even with a Longer Chain Stay i still prefer a lil shorter Crank Arm.
Half Cabs
Full Link!! I have broken every single Half Link Chain i have ever owned! Had waaaay better luck with Full Links.
Never tried Spline Drive. I've tried Socket Drive & That's Great, But Bolt Drive for now.
Depends on what you're doing. Some Grind combos its easier at a slower pace, but a huge gap?! Balls Out Fast!!
Neither haha. Etnies have always been the best. But recently i have discovered that Almond are ultra comfy!
Tan Wall
Slicks, Why cant slicks be Grippy though? I guess you meant knobbly style Tyres?

|

8/16/2013 6:06 AM
Edited Date/Time: 8/16/2013 6:07 AM

Front
8.25 - 27 (big 4s yeah baby yeah)
75psi - street & dirt / 90psi for ramps /// 2.35 f&b
28mm for street / 33mm for dirt & park
Not slammed
2 pegs atm - 4 later
Low seat / 2 fingers
Wtp cream spec
Respectful decibel level hub
Slim & Mid seats
Metal barends
One spacer
Don't care
Female up front / male in the back
170mm or 175mm
halfcabs fast - sliders slow
Full link always
Defo Spline drive
Fast
Etnies
Whitewalls
Depends what I'm riding

|

Freestyle is the answer to everything --
a fresh way to approach a dull or a
dangerous thing.
to do a dull thing with style
is preferable to doing a dangerous thing
without it.

Os 94
Ms 01
Ns 12


8/16/2013 6:40 AM

Running a Front Load want to get a Top Load

Bar Height : 8.5 Bar Width : 28.5

Tire PSI : 70 back and front Tire Size : 2x2.20 front 2x1.95 back

Fork Offset : I don't know

Slammed Wheel : No

How many pegs : I don't run pegs at the moment

How high is my seat : 1 fist or 1 finger

Frame specs : I don't know

Loud or quiet : I want a quiet hub

Seat type : Fat (capital)

Bar Ends : Plastic

Headset spacers : 1 at the moment, running 2 soon

Lacing Pattern : Standard

Female or Male : Female

Crank Length : 175mm

Sliders or Half Cabs : Half Cabs

Spline Drive or Bolt Drive : Spline Drive

Easier tricks going Fast or Slow : Fast

Nike or Vans : Nike

White Wall or Tan Wall : Tan Wall

Slick or Grippy tires : Grippy

|

I'm gonna need bigger bars

8/16/2013 7:13 AM

front load
28.5 rise 27wide
110 psi i dont ushuallly fill them all the wy
no
1 peg or none
post is about 4 inches higher than seat tube
low stand over
quiet
fat
plasic barends
2 spacers
standard
female
175mm
sliders
full link
bolt drive
depends how well i have the trick
nike
neither teal
no preference

|

8/16/2013 8:28 AM

Font Load or Top Load? - both

Bar Hight and Width? - height 8 to 9 width idk 28?

Tire Psi and Size? - 2.25 100 to 110

Fork Offset? idk

Slammed wheel or not? i prefer to have it slammed compared to having it as far back as possible but if i can get it in the middle then i'm cool with it

How many pegs? - 2 for now once i get a bit better might add a 3rd in the front

How high do you run your seat? - to measure my seat height i will usually use my fingers to measure i like it 2 to 3 fingers high

Your Favourite frame specs? - idk yet im still learning

Loud Hub or Quite Hub? - quite gotta be stealthy

Seat type? Capital, Plastic, ect.... - capital

Bar Ends plastic or metal? - i prefer metal but plastic will work

How many Headset spacers? - usually 2 or 3

Favourite lacing Pattern? - 3 cross i think its called like over over under or something like that i cant remember i haven't laced in a while

Female or Male axles? - which ever i have at the time till it need replacement i guess

Crank Length? - 175

Sliders or Half caps? half cabs

Half Link or Full Link? - half link i think they look cleaner

Spline Drive or Bolt Drive? - i would one day like to get a set of spline driver so spline drive
Is it easier for you to do tricks at slow speeds or fast speeds? i find its easier to start out slow

Nike or Vans? - vans

White wall or Tan wall? - tan

Slick Tires or Grippy Tires? - no preference

|

Last words?
Just have fun on your bike.
- Jeremiah Smith

8/16/2013 8:51 AM

Font Load or Top Load? fliped Front load
Bar Hight and Width? 8X28
Tire Psi and Size? what ever feels good, 2.25
Fork Offset? around 30
Slammed wheel or not? no
How many pegs? 2
How high do you run your seat? slammed
Your Favourite frame specs? 21TT, 75HT, 13.75 CS, 8'' ST, Mid BB
Loud Hub or Quite Hub? loud
Seat type? Capital, Plastic, ect.. Plactic
Bar Ends plastic or metal? Nylon
How many Headset spacers? 2 1/8'' plus the dust cap
Favourite lacing Pattern? crosslaced 2X/3X
Female or Male axles? male
Crank Length? 175mm
Sliders or Half caps? half cabs
Half Link or Full Link? full
Spline Drive or Bolt Drive? bolt
Is it easier for you to do tricks at slow speeds or fast speeds? depeds on the trick
Nike or Vans? nither etnies ae the way to go
White wall or Tan wall? Nither black or red
Slick Tires or Grippy Tires? grippy in the front, back dosnt matter

|

MIDWEST MOTHER FUCKER

Bike Check
Bought from Tomdon, and ScramHype

8/16/2013 10:27 AM

Font Load or Top Load? topload
Bar Hight and Width? prefer 8.7 x 28. currently trying 9.5 x 28.5
Tire Psi and Size? 2.35 front and 2.2 rear. 70psi
Fork Offset? 32
Slammed wheel or not? no
How many pegs? 4
How high do you run your seat? 2-3 fingers. gonna try a fist though
Your Favourite frame specs? 75 ht, 13.4 cs, 11.7 bb
Loud Hub or Quite Hub? quiet
Seat type? Capital, Plastic, ect.... fat
Bar Ends plastic or metal? dont matter
How many Headset spacers? 5mm
Favourite lacing Pattern? 4x
Female or Male axles? female front, male rear
Crank Length? 175
Sliders or Half caps? both
Half Link or Full Link? dont matter
Spline Drive or Bolt Drive? either
Is it easier for you to do tricks at slow speeds or fast speeds? slow
Nike or Vans? either
White wall or Tan wall? tan
Slick Tires or Grippy Tires? in the midle

|

I'm on the vital legit list!

8/16/2013 11:12 AM

Font Load or Top Load? Front always.
Bar Hight and Width? 8.25X27-29 no taller than 8.5 no shorter than 26
Tire Psi and Size? Higher psi 2.25 max. Riding 1.90 and 1.95 now.
Fork Offset? I don't really care.
Slammed wheel or not? Yes I fucking hate when my wheel isn't slammed.
How many pegs? None.
How high do you run your seat? Slammed
Your Favourite frame specs? Fly Tierra but I'm open to anything with a 21 inch top tube and a short back end 13.2 and under.
Loud Hub or Quite Hub? I don't care as long as it's good.
Seat type? Capital, Plastic, ect.... Thin padded.
Bar Ends plastic or metal? Whatever I get for free. Plastics at the moment but I don't like them because they break easy.
How many Headset spacers? 3 because I have to but I don't like to run that many.
Favourite lacing Pattern? I don't care.
Female or Male axles? Female.
Crank Length? 175
Sliders or Half caps? What?
Half Link or Full Link? Full link because it's cheaper.
Spline Drive or Bolt Drive? Bolt.
Is it easier for you to do tricks at slow speeds or fast speeds? It depends on the trick, usually fast especially spins and manuals.
Nike or Vans? Vans. Nikes are the worst fucking shoes.
White wall or Tan wall? Black, I hate colored tires but out of the two white because my frames white.
Slick Tires or Grippy Tires? I don't know I guess grippy.

|

45 refs and counting check profile.

8/16/2013 1:11 PM

Front Load
8.65" x 28"
26mm Offset
Don't have preference for this, doesn't seem to affect my riding, only the tightness of my chain and whether I can do crankflips or not.
2 Pegs
2-3 Inches of seatpost showing
I just like a long ST, steep HT, short or medium CS and a 20.5-20.75 TT
Loud hub for sure.
Fat seat, Kink Sexton
Never ran metal barends, but I always wanted to.
I run two 10mm headset spacers
3 cross
Ideally, 14mm in the back 3/8" in front, but I'm running 2 females right now which I really like.
175mm
Sliders
Half link
Bolt Drive
Fast speeds
Vans
If I had to pick, tan wall, but I only run black tires
Slick and grippy tires (e.g. Momentums, Duo SVS, Stradas) Currently running Demo Momentums
|

Email: mccheesekid@gmail.com
Instagram: @McCheeseKid

Bought from: hrin, Me?, ecuadevil, regalracing, Dolphin

8/16/2013 1:21 PM

Font Load or Top Load? front load
Bar Hight and Width? 9" x 30"
Tire Psi and Size? 2.1 and 1.90 psi in the seventies
Fork Offset? 13mm. fight me
Slammed wheel or not? hell yes!
How many pegs? 2, some times 3 or 4.
How high do you run your seat? lol slammed
Your Favourite frame specs? 20.75 75 degree shorter chainstays
Loud Hub or Quite Hub? shhh. gotta be ninja
Seat type? thin and padded
Bar Ends plastic or metal? plastic so i dont scratch my truck all the fucking time
How many Headset spacers? lol 3
Favourite lacing Pattern? 3X
Male axles although i consider female now.
175mm
Half cabs
Half Link, i break them less
Bolt Drive
fast speeds
Vans... Half cabs forever
White wall
Grippy Tires

|

8/16/2013 2:10 PM
Edited Date/Time: 8/16/2013 2:11 PM

Font Load or Top Load?- front laod
Bar Hight and Width?- 8.5x27
Tire Psi and Size?- 100psi, 2.1-2.2 rear, 2.2-2.25 front
Fork Offset?- don't know.. some random GT trails fork atm
Slammed wheel or not?- yessir
How many pegs?- 2
How high do you run your seat?- four inches of post
Your Favourite frame specs?- 11.8bb, 20.5tt, 8.5so, 13cs
Loud Hub or Quite Hub?- whatever
Seat type? Capital, Plastic, ect- somewhere between fat and slim
Bar Ends plastic or metal?- plastic
How many Headset spacers?- one 10mm
Favourite lacing Pattern?- 4x inter weaved 48h
Female or Male axles?- male
Crank Length?- i want some 170s
Sliders or Half caps?- cabs
Half Link or Full Link?- full
Spline Drive or Bolt Drive?- either
Is it easier for you to do tricks at slow speeds or fast speeds?- depends on the trick
Nike or Vans?- of those vans
White wall or Tan wall?- of those tan
Slick Tires or Grippy Tires?- grriiipppyyy

|

FREE not under the control or in the power of another; able to act or be done as one wishes
STYLE a particular, distinctive, or characteristic mode of action or manner of acting

8/16/2013 2:37 PM

Font Load or Top Load? - Depends on the bars. Frontload now since my bars are 8.75.
Bar Hight and Width? - Height depends on stem. 27-28" width
Tire Psi and Size? - 80-90 both, 2.30-2.40 inflated front and back
Fork Offset? - 25mm.
Slammed wheel or not? Nope. Peg fits on the dropout better when the wheel is pulled back.
How many pegs? Four.
How high do you run your seat? About five fingers
Your Favourite frame specs? 75.5 ht, 8.5 st, 71 sta, 11.8 bb, 13.25 cs
Loud Hub or Quite Hub? Quiet. Freecoaster.
Seat type? Capital, Plastic, ect.... Slim Tree.
Bar Ends plastic or metal? Plastic
How many Headset spacers? 3 5mm spacers.
Favourite lacing Pattern? 3x for 36h, 4x for 48h
Female or Male axles? Female. No shemale though.
Crank Length? 170mm
Sliders or Half caps? Half cabs.
Half Link or Full Link? Full link.
Spline Drive or Bolt Drive? Socket.
Is it easier for you to do tricks at slow speeds or fast speeds? Slower at first then fast.
Nike or Vans? Almonds
White wall or Tan wall? White wall
Slick Tires or Grippy Tires? Grippy

|

YOU AVIN A LAUGH M8?
┬┴┬┴┤ ( ͡° ͜ʖ├┬┴┬┴
The Trailest Bike On Vital

8/16/2013 2:51 PM

Damn it guys, make the question in bold so we can differentiate

|

I'm gonna need bigger bars

8/16/2013 2:55 PM

Font Load or Top Load? Front
Bar Hight and Width? 8.5" x 29"
Tire Psi and Size? 60psi 2.2 front X 2.1 back
Fork Offset? 32mm
Slammed wheel or not? Slammed (I have no choice)
How many pegs? None
How high do you run your seat? About 3" just enough so I can squeeze my seat with my knees
Your Favourite frame specs? Chromo and I'm good lol
Loud Hub or Quite Hub? Not too loud not too quiet. Crisp.
Seat type? Capital, Plastic, ect.... Fat
Bar Ends plastic or metal? Nylon (why pay $15 for metal bar ends?)
How many Headset spacers? None
Favourite lacing Pattern? 3x
Female or Male axles? Female
Crank Length? 170mm
Sliders or Half caps? Sliders
Half Link or Full Link? Half link
Spline Drive or Bolt Drive? Bolt drive
Is it easier for you to do tricks at slow speeds or fast speeds? Inbetween
Nike or Vans? Neither, etnies.
White wall or Tan wall? Tan
Slick Tires or Grippy Tires? Slick

|

Why be the same when you can be different?
Official Vital Buddy: Chrisaustin

8/16/2013 4:14 PM

Stem: Topload.
Bars: 9"-9.5" high, 26-29" (depending on height)
Tyres: 45-50 psi, 2.35
Fork Offset: 33.5 (Fit Shiv v1)
Wheel almost slammed
2 pegs, right side
seat a good 3 inches high from frame
frame specs? ive only had two frames. fly lago 2 is my favourite
moderately loud hub, like a loud bee, not an engine
premium collage seat
whatever bar ends come with my grips, or par ends.
however headset spacers i need for the stem im running? ( btw thats kinda a silly question since spacers come in different sizes )
half caBs
male axles cuz i dont have any female hubs...
cranks: 175mm
lacing pattern... uh doesnt matter, i dont even know, my friend does it for me (lazy shit i know)
full link
bolt drive, spline drive is pretty stupid to me
the speed depends on the trick? park or street? faster park, slower street
vans, cuz nike are stupid, but i dontlike vans either. eitther vision street wear or pumas
white wall, tan is what happens to old whitewalls.
grippy/ soft tyres

|


Insta: @devicacy

8/16/2013 4:15 PM

didnt mean to quote that sorry

|


Insta: @devicacy

8/16/2013 7:23 PM

Font Load or Top Load? Top, I like high parts since I'm so tall
Bar Hight and Width? 8.875x 29, not quite that high atm tho
Tire Psi and Size? 2.2(5) FRONT 2.10 REAR 80-100 PSI
Fork Offset? 32mm
Slammed wheel or not? as close as I can
How many pegs? none
How high do you run your seat? 3-4 fingers
Your Favourite frame specs? 74.5 ht, 21.5 tt, 13.875 CS, 71 st, 8.75 SOH
Loud Hub or Quite Hub? Loud
Seat type? Capital, Plastic, ect.... Slim pivitol
Bar Ends plastic or metal? Don't care
How many Headset spacers? 3
Favourite lacing Pattern? 3 or 4, don't care too much
Female or Male axles? Female looks nicer
Crank Length? 175
Sliders or Half caps? half cabs, not that i can do either
Half Link or Full Link? Full
Spline Drive or Bolt Drive? Bolt drive
Is it easier for you to do tricks at slow speeds or fast speeds? Fast
Nike or Vans? Vans
White wall or Tan wall? tan or black
Slick Tires or Grippy Tires? Gimme dat grip, slicks suck on dirt

|

"Let it be heard: FOUR IS BACK MUH FUCKAZ"
Refs: Mobking, four, tomdon, Sickdude, xxOhioanxx onetrykid Krisner BMX
FBM Pizza Beer Roast Machine

8/16/2013 7:27 PM

Font Load or Top Load? top
Bar Hight and Width? like 8.5 high 27/26 wide
Tire Psi and Size? 2.1-2.25 70psi
Fork Offset?28/30
Slammed wheel or not?dont care
How many pegs? 0 or 2
How high do you run your seat? few inches
Your Favourite frame specs? maybe like 75.5 ht 13.3-13.7 cs 20.75 tt
Loud Hub or Quite Hub? quiet
Seat type? Capital, Plastic, ect.... medium
Bar Ends plastic or metal? plastic
How many Headset spacers? quite a few
Favourite lacing Pattern? havent learned how to lace wheels yet
Female or Male axles?female
Crank Length?175
Sliders or Half caps?depends
Half Link or Full Link?half
Spline Drive or Bolt Drive?bolt drive
Is it easier for you to do tricks at slow speeds or fast speeds? slow when im learning
Nike or Vans? vans
White wall or Tan wall? tan wall
Slick Tires or Grippy Tires? grippy

|

virginia beach ~ instagram: @_harru_ ~ 4pegz

8/16/2013 9:33 PM
Edited Date/Time: 8/16/2013 9:36 PM

here we go...

Font Load or Top Load?
I prefer a top load because I have this mindset where I can pull into manuals easier with one, and I do not need to ride an obnoxiously tall looking handlebar.

Bar Hight and Width?
Anything 8.5 and above in rise, and anything more than 27 inches wide at the least.

Tire Psi and Size?
Depends on how I want to ride on certain days, I can switch anywhere from a 1.95 rear, 2.10 front up to 2.25 rear, 2.4 front.

Fork Offset?
Not sure right now with the forks I have currently but they feel good

Slammed wheel or not?
Slammed enough to where the back end is more responsive and pulled back enough to give room for taking off and putting on my chain.

How many pegs?
2 but working on 4, but want to run 4 plastic pegs, maybe like demo dumbchucks or primo binary plastics.

How high do you run your seat?
Depends on whether or not I am going for a long riding day or short riding day, for a long day 1-2 inches of seat post, for a short day 1 inch and under.

Your Favourite frame specs?
20.5 Top Tube - 8" to 8.25" Seat Tube Height - 13.5" and below Chainstay Length - Want to try an 11.5" BB Height - 75* Headtube Angle or a 75.5* Headtube Angle.

Loud Hub or Quite Hub?
Semi-Loud, like my current hub, primo mix v1.

Seat type? Capital, Plastic, ect....
Fat Cap. for comfort cause I'm fat.

Bar Ends plastic or metal?
Metal, lasts longer, unless it is the par ends.

How many Headset spacers?
I don't f***ing know... lol

Favourite lacing Pattern?
3 cross, it is what I have always had.

Female or Male axles?
Female Axle if made of chromoly or if not, male axle.

Crank Length?
175mm want to try 170mm though.

Sliders or Half caps?
Sliders in general and for the style points, Half Cabs for the techy combo shit when I feel good enough to try combos out.

Half Link or Full Link?
Half mainly, or if full link I have my own little combination, a KMC-70SL full link chain with a shadow link installed instead of a master link which for me is the jesus of bmx chain combinations.

Spline Drive or Bolt Drive?
Bolt drive... I feel safer since i crank really hard up hills sometimes and I am just more used to, and enjoy spending more time working on my bike

Is it easier for you to do tricks at slow speeds or fast speeds?
Depends on whether I am learning them, have already learned them, or am doing a line. And what style/genre of music I am listening too.

Nike or Vans?
Wanting to get Vans Half Cabs for the longest damn time now but currently ride Nike Janoskis in size 12 for a more responsive feel or if I feel like chilling and flowing, size 13 Lotek Mike Mid's just to be more comfortable.

White wall or Tan wall?
I want to get some tan wall demo machetes in 2.35 for my bike.

Slick Tires or Grippy Tires?
For Street, semi-slick all around (like the strada tires) -- For Park, Grip in the front slick in the back.

|

Welp, broke past 1000... yeeeee

My Youtube / RainBMX
My Insta / What_Is_Barspin

8/16/2013 10:11 PM

Font Load or Top Load
Top Load
Bar Hight and Width
Up to 9 and as wide as 29
Tire Psi and Size?
100 and 2.35
Fork offset?
36ish
Slammed wheel or not?
Slammed and tight. If its not, it always get loose.
How many pegs?
1
How high do you run your seat?
If its fat, a little bit above the post, if it's slim, slammed as fuck
Your Favourite frame specs?
21" Cult OS
Loud Hub or Quite Hub?
Loud when I'mu riding
Seat type?
Pivitol and fat or 1 piece
Capital, Plastic, ect....
Bar Ends plastic or metal?
Metal
How many Headset spacers?
As few as possible
Favourite lacing Pattern?
I don't care
Female or Male axles?
Male
Crank Length?
180/75
Sliders or Half caps?
Sliders
Half Link or Full Link?
Full Link
Spline Drive or Bolt Drive?
Bolt
Is it easier for you to do tricks at slow speeds or fast speeds?
Fast and sketchy
Nike or Vans?
Nike
White wall or Tan wall?
White
Slick Tires or Grippy Tires?
Grippy

|

Put in work.
Put in work.
Put in work.
Flacko put 'em in the dirt.