Previous Fly Frames

i will tell you what i know about fly frames and other parts.

i met a rider when i was on holidays and he was riding a Fly trueno. he got it for 247$ with a disccount because he snapped a Cromoly frame he had on a complete. when i met him, he was riding the fly trueno for 1 year, and the chainstays were so bent you couldn't manual properly, also, he had 2 cracks on the frame (seat tube welds area). he is not a really hard rider but he did all that in one year.
there is one rider i use to ride with when i go to skateparks, and he snapped the pedal boss weld of his 2012 dolmen cranks, he had them for almost one year.
i know three people who bought the fly proton, 2 of them snapped the frame, stem, cranks, bars and forks, and the other one, only the forks. (they all had to change hubs and more but i don't remember exactly)

this is all i know, I, personally, would never get any fly part, except the fly montaña bars, those seem to last long (i know 2 riding them and they have them for over a year).

The only Fly part I have is the Alta stem (OG not Alta 2) and it's been doing really well over the 2 or 3 years I've had it

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

standard Byke co
Solid
S&M/Fit
Sunday
stranger
bsd
cult thought id never say that but its true there good frames with lame logo

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

...more

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

standard Byke co
Solid
S&M/Fit
Sunday
stranger
bsd
cult thought id never say that but its true there good frames with lame logo

...more

and FBM/The Take

Well last time I rode a fly, it felt pretty good in my opinion, I would not mind dumping a little over $300 on one, I am NOT RICH but I am getting over $3,500 from when I was hit by a car last year, the settlement check from the lawsuit which my dad won, he is a lawyer (does not make bank though), is closer to $3,700

so I think I am pretty well off with dumping 300 or so on a frame. I am taking into consideration everyones info by the way...

@OneGuyIlluminatiEye.... If I were to get a frame from any one of those companies.... it would be
Trail or Park v2 BSD Frame,
Sunday Broadcaster
S&M BTM
Fit Benny L, or a Marve if I could find one
I am pretty sure you can notice a trend (short rear ends)

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

...more

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

standard Byke co
Solid
S&M/Fit
Sunday
stranger
bsd
cult thought id never say that but its true there good frames with lame logo

...more

Collin_McClenahan wrote:

and FBM/The Take

Collin_McClenahan wrote:

and FBM/The Take

...more

The Take Ivy 5st is a nice one!

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

...more

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

standard Byke co
Solid
S&M/Fit
Sunday
stranger
bsd
cult thought id never say that but its true there good frames with lame logo

...more

Collin_McClenahan wrote:

and FBM/The Take

Collin_McClenahan wrote:

and FBM/The Take

...more

i knew i forgot one (=

OneGuyIlluminatiEye wrote:

i knew i forgot one (=

OneGuyIlluminatiEye wrote:

i knew i forgot one (=

...more

Don't worry man I got your back.

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

...more

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

standard Byke co
Solid
S&M/Fit
Sunday
stranger
bsd
cult thought id never say that but its true there good frames with lame logo

...more

Everyone always overlooks the Redline G7. Yeah, they only make one aftermarket freestyle frame so far, but it's a great all around frame, and it's probably stronger than a lot of today's frames. And you dislike the 13.40 cs length, but it's cs are right around 13.50-13.75. I can't wait to see the street frame they're making come out.

As for Fly frames, I'll pass, but I pass on a lot of frames.

OneGuyIlluminatiEye wrote:

i knew i forgot one (=

OneGuyIlluminatiEye wrote:

i knew i forgot one (=

...more

And Terrible One! Don't forget the best.

Collin_McClenahan wrote:

and FBM/The Take

Collin_McClenahan wrote:

and FBM/The Take

...more

OneGuyIlluminatiEye wrote:

i knew i forgot one (=

OneGuyIlluminatiEye wrote:

i knew i forgot one (=

...more

Xxohioanxx wrote:

And Terrible One! Don't forget the best.

Xxohioanxx wrote:

And Terrible One! Don't forget the best.

...more

barcode!!!

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

...more

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

standard Byke co
Solid
S&M/Fit
Sunday
stranger
bsd
cult thought id never say that but its true there good frames with lame logo

...more

Chuck8273 wrote:

Everyone always overlooks the Redline G7. Yeah, they only make one aftermarket freestyle frame so far, but it's a great all ...more

Chuck8273 wrote:

Everyone always overlooks the Redline G7. Yeah, they only make one aftermarket freestyle frame so far, but it's a great all around frame, and it's probably stronger than a lot of today's frames. And you dislike the 13.40 cs length, but it's cs are right around 13.50-13.75. I can't wait to see the street frame they're making come out.

As for Fly frames, I'll pass, but I pass on a lot of frames.

...more

i dislike that i need a new sprocket

nothing can compare to a standard STA or terrible one barcode

I'd say pass. I rode two Tierras. one came apart at the headtube junction, and the second I sold a month or two after having it. I didn't want to risk it.

I rode a fly diablo and it held up fine

Get the new Fuego line , proven by Devon Smillie . Or Shane Westons frame.

Brayden_Buckingham wrote:

Get the new Fuego line , proven by Devon Smillie . Or Shane Westons frame.

Brayden_Buckingham wrote:

Get the new Fuego line , proven by Devon Smillie . Or Shane Westons frame.

...more

eh, I am not really feeling either of those frames

Brayden_Buckingham wrote:

Get the new Fuego line , proven by Devon Smillie . Or Shane Westons frame.

Brayden_Buckingham wrote:

Get the new Fuego line , proven by Devon Smillie . Or Shane Westons frame.

...more

you don't know if it's proven, devon smillie probably recieved a lot of those frames from fly

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

...more

OneGuyIlluminatiEye wrote:

the fly tractor chain is legit, i wouldn't ever get a fly frame though

only companies that make frame worth buying are

standard Byke co
Solid
S&M/Fit
Sunday
stranger
bsd
cult thought id never say that but its true there good frames with lame logo

...more

Collin_McClenahan wrote:

and FBM/The Take

Collin_McClenahan wrote:

and FBM/The Take

...more

yes can't forget FBM