Posts: 51
Joined: 4/20/2013
Location: Hillsboro, OR USA
Currently running a 9t remix hub with a BSD guard for the Mix hub, it threads on and everything but the metal base of the guard keeps tightening my wheel after about 20 minutes of riding, would making the sleeve rotate itself without too much contact on the base solve this problem? It always happens when I grind rough ledges
Posts: 4847
Joined: 6/29/2012
Location: Elk Grove, CA USA
Most likely. I have a hub that can't fit almost any hubguard except universal ones that slip right over all the hardware. I tried it and it seized up my hub. And my friend could use it but then it rubbed his hub shell if it tightened too much, and the hub was loose if it was tightened too less.
Latest Bike Check/Update
Bought from: adam1234, tomdon (2), oscarbmx, the balt, smokesmokesmoke
Posts: 7733
Joined: 7/17/2011
Location: CAN
Get a GLAND ? Or just shave it with a grinder a bit , or don't grind rough ledges
Instagram : braydenbuckingham
My Cult 2 Short
Posts: 51
Joined: 4/20/2013
Location: Hillsboro, OR USA
isnowyaznV2 wrote:Most likely. I have a hub that can't fit almost any hubguard except universal ones that slip right over all the hardware. I ...more
I think that's what happened to mine, but i made it free spinning and it works, just added a tiny spacer that only touches the cone and filed the hole of the sleeve so it doesnt completely hold on, works amazing
Posts: 3663
Joined: 5/26/2012
Location: Lentini, ITA
I use THIS Drive side on my remix.
Old bike VVV
California Living
I now have a more or less stock sunday scout with a complete Demo rear wheel. Sue me
Posts: 4847
Joined: 6/29/2012
Location: Elk Grove, CA USA
danielclark_e wrote:I think that's what happened to mine, but i made it free spinning and it works, just added a tiny spacer that only touches the ...more
Yeah, I couldn't do that to mine, and I ripped a secondary seal so I got pissed and just decided to go with a universal hubguard..
Latest Bike Check/Update
Bought from: adam1234, tomdon (2), oscarbmx, the balt, smokesmokesmoke
