Primo n4fl help

Related:
Create New Tag

7/13/2013 6:24 PM

How the hell do you get the hubguards off this stupid hub!? I tried prying it & putting a flat head on the opposite side & hammering it off but I can't get it to come off I even tried wax & grease removal stuff & 409 but still nothing. I need to get them off because I have 4 heads of broken spokes trapped in there & it's destroying the inside of the hub. Any help, suggestions or video tutorials?

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

7/13/2013 6:37 PM

get an extension or something and hammer the axle out to the other side

|

7/13/2013 7:19 PM

I tried that too but it didn't seem like it moved at all

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

7/13/2013 8:31 PM

thread one of the bolts in a little bit and tap on the bolt, and the axle should push out.

|

7/13/2013 8:48 PM

sundaybmxRR wrote:

thread one of the bolts in a little bit and tap on the bolt, and the axle should push out.

This. And try setting te wheel in a pallet when you do it. I had to do that to get my coaster axle out

|

I'm on the vital legit list!

7/14/2013 4:33 AM

sundaybmxRR wrote:

thread one of the bolts in a little bit and tap on the bolt, and the axle should push out.

What I had to do with mine.

|

I do stuff and I'm not good at it.
I got refs