Probably a stupid question...

Related:
Create New Tag

4/6/2012 11:06 PM

Looking to buy a new frame, i still have the stock wheels from the 2011 verde prism, as the axels on those are 14mm (3/8?), do i need to get like, 14mm dropouts on the frame? pretty much confused.. Cheers

|

Plymouth, England.

4/7/2012 12:09 AM

3/8 is 10mm
yes, get a frame with 14mm dropouts

|

4/7/2012 12:11 AM

brianoob wrote:

3/8 is 10mm
yes, get a frame with 14mm dropouts

am i limited to only getting 14mm? or is it jus best? because source bmx have a bsd trailorpark for £192 only in 10mm to sell the 10mm off, 14mm are £250 dizzy

|

Plymouth, England.

4/7/2012 12:42 AM

pretty much... i think youd have a harder time finding a new rear hub thats a 10mm unless its a walmart hub

|

skooter... dont be a pussy

skooter: "WHY DIDN'T YOU GIVE ME VODKA!?"
sketchytravis: "... because i like being drunk, and if i give you my vodka im not drunk as much"
Chuck8273: "Logical. I like this logic. "

4/7/2012 12:45 AM

sketchytravis wrote:

pretty much... i think youd have a harder time finding a new rear hub thats a 10mm unless its a walmart hub

okay ill stick with getting a 14mm dropout frame then, thanks

|

Plymouth, England.

4/7/2012 3:38 AM

profile make 10mm rear hubs and you can get conversion kits for odyssey v3 so its 10mm and female. the conversion kit is about £40 i know were to get a odyssey v3 to a hazard light for £135 chrome rim

|

parkrat.